Institute For Plasma Research-IPR has published Tender For Construction Of Aluminium Partition And Other Allied Works At Auxiliary Building, Ipr, Bhat, Gandhinagar. Submission Date for this Tender is 10-10-2023. Aluminium Furniture Tenders in gandhinagar Gujarat. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, welding, fixing in position and applying a Yellow Zinc Chromate priming coat of approved steel primer all complete. 1. Rate to include making holes & welding as required to complete the work all as directed by the Engineer-In-Charge. 2. The hinges, bolts etc. required for completion of entire work shall be measured & paid for, under this Item only. |
| 2 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shadeon M.S. plate/ Round/ Angle/ Rectangular or any other section as required to complete the work. Two or more coats on new work. Note: Actual area of painted surface of each element shall be measured and paidin square meter. Rate for the item is to be quoted considering the mode of measurement as above. |
| 3 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners/ S.S. Screw of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings / Sketch and the directions of Engineer-in-charge. (Glazing i.e. Glass work will be measured paid separately as an Item of this tender). Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 25). |
| 4 | Providing and fixing 12 mm thick pre-laminated particle board with decorative lamination on both sides, flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings/sketches, complete all asper direction of Engineer-In-Charge. |
| 5 | P/F50 MM PUF insulated (Roof) Panel with Corrugation sheet at top and flat Ribbed sheet at bottom side0.45 mm TCT colour Coated GI Sheet with PUF as Insulation Sandwich Panel in between including closing of all the ends of PUF using appropriate GI sheet of required size and shape,the panel should be manufactured by pressure injection of CFC free Polyurethane foam at 38 + 2 Kg/m3 density, in between the outer and inner steel sheet surfaces and should be supplied in single length up to 6.00 meter or as desired by Engineer in charge. The sheet shall be fixed using self-drilling/self-tapping screws of size (5.5 x required length) with EPDM seal, silicon sealant at joints complete up to any pitch in horizontal/vertical or curved surfaces excluding the cost structural steel member (i.e. beam, purlin, etc.) and including cutting to size and shape wherever required including all materials labour, scaffolding, wastage, tools, tackles, equipment, transportation all complete as directed by engineer-in-charge. All overlaps shall be sealed with appropriatesilicone sealants. Roof should be water tight. The PPGI Sheets shall be of minimum 240 MPA Steel grade & shall have a Zinc Coating of minimum 120 GSM as per IS 277/1992, 5-7 Microns of epoxy primer on both sides of the Sheet & Polyester top Coat of 18-20 microns on one side/outer side. The PPGI Sheets/PUF Panels shall have a protective guard film of minimum 20-25 microns to avoid scratches to finished panel during transportation. Complete all as directed by the Engineer-In-Charge. Note: The clear Length x Width executed at site will be measured & paid for.Any Wastage shall not be measurement & Paid. |
| 6 | Providing and fixing glazing (Glass Work) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings/Sketches and the directions of engineer-in-charge . With 5 mm thick Plain glass/ float glass panes of 5 mm thickness as directed by EIC complete all as per direction of EIC. |
| 7 | Providing and Fixing 12mm dia & 160mm long Chemical anchored fasteners ofM/s Hilti make anchorHAS-U 5.8 M12 x 160 & M/s Hilti make Injectable mortar adhesive, HIT-RE-500 for fixing of base plate of structure column/staircase/other member with existing trimix RCC flooring including necessary drilling, blowing, cleaning etc., all tools & tackles required for proper fixing of Chemical Anchor. Complete all as per Manufacture"s Specificationor as Directed by the Engineer-In-Charge. Note: 1.The Installation Should be done through authorised applicator and as per strictly Manufacture"s Specification. 2. The quoted Rate should be inclusive ofdrilling through encountered reinforcement (if any) with appropriate drilling machine. |
| 8 | Providing and Fixing 12 mm dia & 150 mm long Chemical anchored fasteners ofM/s Hilti make anchorHIT-V-5.8 M12 x 150 & M/s Hilti make Injectable mortar adhesive, HIT-HY 270-for fixing ofM.S. plate of structure Beam/Rectangular Structural steel Section/other member with existing 230mm thick Brick wallincluding necessary drilling, blowing, cleaning, Scaffolding etc., all tools & tackles required for proper fixing of Chemical Anchor. Complete all as per Manufacture"s Specificationor as Directed by the Engineer-In-Charge. Note: 1.The Installation Should be done through authorised applicator and as per strictly Manufacture"s Specification. 2. The quoted Rate should be inclusive ofdrilling through encountered reinforcement (if any) with appropriate drilling machine. |
| 9 | Demolishing brick work In cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material outside IPR campuslead as per direction of Engineer-in-charge.Complete for all heightsand all leads as directed by the EIC. Note: The quoted rate should be inclusive the cost of Scaffolding as required to complete the work. |
| 10 | Providing and laying CEMENT PLASTER 12 mm cement plaster of mix:1:4(1cement:4sand),Complete in all respect as directed by Engineer-In-Charge. Note: The Plaster should be of single coat Mala finished. |
| 11 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer. Note: for Internal Surface |
| 12 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work. Note: for Internal Surface |
| 13 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight up to 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete, all as per manufacture"s specification or as directed by the Engineer-In-Charge. |
| 14 | Providing and fixing IS : 12817 marked stainless steel butt hinges of size 100X58X1.90 mm with stainless steel screws etc. complete all as directed by the Engineer-In-Charge. |
| 15 | Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete all as directed by the Engineer-In-Charge. |
| 16 | Providing and fixing aluminium handles of 125mm , ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 17 | Providing and fixing aluminium tower bolts of Size 200 x 10mm , ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc., complete all as directed by the Engineer-In-Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
