|
| 1 | Supply and delivery400 watt open type ballast forconventional 400 watt HPSV fittings.(Make -Philips/Crompton/Bajaj) |
| 2 | Supply and delivery150 watt open type ballast forconventional 150 watt HPSV fittings.(Make -Philips/Crompton/Bajaj) |
| 3 | Supply and delivery400 watt SON-T lamp forconventional 400 watt HPSV fittings. (Make -Philips/Crompton/Bajaj) |
| 4 | Supply and delivery150 watt SON-T lamp forconventional 150 watt HPSV fittings. (Make -Philips/Crompton/Bajaj) |
| 5 | Supply and delivery150/250/400 ignitor forconventional 400/150 watt HPSV fittings.(Make -Philips/Crompton/Bajaj) |
| 6 | Supply and delivery240 Volt AC, 50/60Hz Single Dial Analog Time Switch(Make L&T,Model-FM/1 Quartz,Cat No. JC48B1) |
| 7 | Supply & delivery of 230 Volt, 400 Watt. Metal halide Lamp. (Make -Philips/Crompton/Bajaj). |
| 8 | Supply & delivery of 230 Volt, 250 Watt. Metal halide Lamp.(Make -Philips/Crompton/Bajaj). |
| 9 | Supply & delivery of 230 Volt, 150 Watt. Metal halide Lamp.(Make -Philips/Crompton/Bajaj). |
| 10 | Supply & delivery of 230 Volt, 400 Watt. Metal halide ballast. (Make -Philips/Crompton/Bajaj). |
| 11 | Supply & delivery of 230 Volt, 250 Watt. Metal halide ballast.(Make -Philips/Crompton/Bajaj). |
| 12 | Supply & delivery of 230 Volt, 150 Watt. Metal halide ballast.(Make -Philips/Crompton/Bajaj). |
| 13 | Supply and delivery150/250/400 ignitor forconventional 400/250/150 watt Metal halide. (Make -Philips/Crompton/Bajaj) |
| 14 | Supply & delivery of 415Volt, 50Hz, 70Amp.(AC-3) 3-Pole Power Contactor(Type- MNX-70) conform to IS/IEC 60947-4-1(Make- L&T,Havells,Legrand) |
| 15 | Supply & delivery of 415Volt, 50Hz, 32Amp.4-Pole MCB(10KA, \"C\"Curve)(Make- Legrand, L&T, Havells, Siemens) |
| 16 | Supply & delivery of 415Volt, 50Hz, 63Amp.4-Pole MCB(10KA, \"C\"Curve)(Make- Legrand, L&T, Havells, Siemens) |
| 17 | Carriying charge of the above materials |
| 18 | Terms and conditions for supply of maintenance materials:-1.Make- Crompton/Philips ---- in accordance with the make of existing fittings, as per direction of EIC.2. For all lamps, ballasts, ignitors original test certificates from OEM, mentioning individual products sl. no., should be submitted to this department during material supply, failing which the product will be rejected.3. The defect liability period should be one year. Individual product warranty certificate from OEM should be submitted during material supply. In case of failure of product within warranty period, agency should arrange free replacement of the product.4. Materials should be supplied in three (03) parts as per site demand and RA bills will be generated accordingly.5. If desired by the authority, 10% of materials out of the supplied lot may be sent for testing to any NABL accredited Government Laboratory. The agency should carry out the test at his own cost and the reports in original should be submitted for claiming bills. If testing fails, entire lot will be rejected. |
