Tender For Development Of Pink Toilet In Vrindan Mathura (Up), Mathura-Uttar Pradesh

Tender For Development Of Pink Toilet In Vrindan Mathura ( Up ) ; 1 Earth Work In Excavation In Foundation In Ordinary Soil ( Loam, Clay, Or Sand ) Including Lift Upto 1.5 M And Lead Up To 30 M And Including Filling Watering Ramming Of Excavated Earth In To The Trenches Or In To The Space Between The Building And The Sides Of The Foundation Trenches Or Into The Space Between The Building And The Side Of The Foundation Or In The Plinth And Removal Of Surplus Earth As Directed By E / I Upto A Distance Of 30M.From The Foundation Trenches. 2 Earth Work In Cutting Including Cartage 5Km Distance Or In Embankment In Ordinary Soil Excavation To Be In The Form Of A Regular Pits Not Exceeding 0.50M In Depth And Earth Work In Embankment To Be In 20Cm Layers Including Ramming And Dressing The Surface To Required Levels And Slopes And Also Including 1.5 M Lift And 30M Lead. The Earth In Form Of Cutting ( B ) To Be Used As Spoil Banks Within 50M Distance As Directed By The Engineer-In-Charge 3 Extra For Earth Work In Embankment Mechanically Compacted To 95% Proctor Density In Ordinary Soil, Excavation To Be Done Form Of Regular Pits Not Exceeding 0.5Mtr In Depth And Work Embankment To Be In 20Cm Layer Including Ramming And Dressing Pulveerzation The Surf Including Supply Of Labour, T&P, Roller And Water Sprinkler 4 Provides & Laying Cement Concrete In 1:4:8 ( 1 Cement : 4 Coarse Sand : 8 Graded Stone Aggregate 40 Mm Nominal Size ) & Curing Complete, Including Cost Of Form Work In Foundation And Under Floors. 5 Providing And Laying In Position Machine Batched And Machine Mixed Design Mix, M-25 Grade Cement Concrete For Reinforced Cement Concrete Work, Using Cement Content As Per Approved Design Mix, Including Pumping Of Concrete To Site Of Laying And Including The Cost Of Centering, Shuttering, Finishing But Excluding Reinforcement, Including Admixtures In Recommended Proportions As Per Is: 9103 To Accelerate, Retard Setting Of Concrete, Improve Workability Without Impairing Strength And Durability As Per Direction Of Engineer-In- Charge. ( Note: Cement Content Considered In This Item Is @ 330 Kg / Cum. Excess / Less Cement Used As Per Design Mix Is Payable / Recoverable Separately ) .All Work Up To Plinth Lvl. 6 All Works Above Plinth Level Upyo Floor V Floor 7 Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Up To 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Above Plinth Level Up To Floor Five Level, Including The Cost Of Centering, Shuttering, Finishing And Excluding Reinforcement, With 1:1.5:3 ( 1 Cement : 1.5 Coarse Sand ( Zone-Iii ) : 3 Graded Stone Aggregate 20 Mm Nominal Size ) . 8 Reinforcement Of Reinforced Concrete Or Reinforced Brick Work Brought To Required Shape As Necessary Including Bending For Proper Completion Of The Work And Including The Supply Of Steel And Its Waistage Bend, Hooks, Binding Wire And Authorized Over Lapping Shall Be Measured Upto Floor Two Level Etc Complete As Per Mort&H Specifications 12.40 ( 1600 ) 9 Steel Work Welded In Built Up Sections / Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required. In Gratings, Frames, Guard Bar, Ladder, Railings, Brackets, Gates And Similar Works 10 Structural Steel Work Riveted, Bolted Or Welded In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. 11 Class M150 ( Non Modular ) Brick Work In1:4 Cement And Coarse Sand Mortar In Foundation And Plinth Including Supply Of All Material, Labour And T&P Etc. Required For Proper Completion Of The Work. 12 Class-150 ( Non Modular ) Brick Workbut In In1:4 Cement And Coarse Sand Mortar Super Structure Above Plinth Level Upto Floor Five Level ( Upto Five Stories ) Including Necessary Cutting And Moulding Of Brick Work As Required And Also Including Honey Combed Brick Work In Thickness Of Wall More Than 12 Cm. 13 12Mm Cement Plaster With Cement Mortar In Proportion Of 1:4 Cement & Coarse Sand Of Single Coat For Interior Plastering Upto Floor Two Level Including Internal Rounded Angles Chamfers And Rounded Angles Not Exceeding 80Mm. In Girth And Finished Even And Smooth 14 15Mm Cement Plaster With Cement Mortar In Proportion Of 1:6 Cement & Coarse Sand Of Single Coat For Interior Plastering Upto Floor Two Level Including Internal Rounded Angles Chamfers And Rounded Angles Not Exceeding 80Mm. In Girth And Finished Even And Smooth 15 6Mm Celling Plaster 1:3 ( 1 Cement: 3 Fine Sand ) Cement & Fine Sand In F.M. Not Less Than 1.25, 1:3 Including Chiping Of Rcc Surface Before Ceiling Plaster. The Cost Of Including All Material, Labour T&P And Scafolding Etc. Complete 16 Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. 17 Providing And Applying Of Heritage Grit Finish, A Surface Texture Paint After Applying Corresponding Roller Coat Brush Finish As Heritage Primer On Pre Plasterd Surface To Be Smooth Level Without Any Undulations, Color Scheme As Per Approved Sample In Approved Shade.Grit Is A Two Component System Of Natural Marble Chips 25 Kg And 5 Kg Of Bonding Agent ( 100% Pure Acryalic Emulsion ) . The Composition Of Texture Paint Consits Of Grit, Made Of Natural Marble Chips, No Pigment Added Matt Finish.Flame Retardant Resistance To Fungal And Algal Attacks The First Coat ( Primer ) Should Be Applied By Brush Or Wool Roller As Base Coat, Diluted With Sufficient Water And The Next Coat A Final Coat To Be Applied With Trowel And Properly Finished. The Thickness Of Both Coat Should Be 1.00 Mm To 1.50 Mm.Application To Be Carried Out By CompanyS Authorised Dealer 18 Distempering With Oil Bound Washable Distemper Of Approved Brand And Manufacture To Give An Even Shade : New Work ( Two Or More Coats ) Over And Including Water Thinnable Priming Coat With Cement Primer Including Supply Of All Material And T&P Required For Proper Completion Of Work 19 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade : Two Or More Coats On New Workincluding Supply Of All Material And T&P Required For Proper Completion Of Work. Wood & Steel. 20 Providing And Laying Vertified Tiles In Floor Without Lean Concrete Of 600X600mm Sizes ( Thickness 10Mm ) With Water Absorption Less Than 0.08% And Confirming To Is: 15622, Of Approved Brand Manufacture, In Desired Colour And Shades, Laid With Cement Based High Polymer Modified Quit Set Tile Adhesive ( Water Based ) Confirming To Is :15477, Including Grouting Of Joints 21 Providing And Laying Anti Skid Vertified Tiles In Floor Without Lean Concrete Of 600X600mm Sizes ( Thickness 10Mm ) With Water Absorption Less Than 0.08% And Confirming To Is: 15622, Of Approved Brand Manufacture, In Desired Colour And Shades, Laid With Cement Based High Polymer Modified Quit Set Tile Adhesive ( Water Based ) Confirming To Is :15477, Including Grouting Of Joints 22 Providing And Fixing 1St Quality Ceramic Glazed Wall Tiles Confirming To Is: 15622 ( Thickness To Be Specified By The Manufacture ) Of Approved Make In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge In Skerting, Riser Of Step And Dados Over 12 Mm Thick Bed Of Cement Mortar 1:3 ( 1 Cement :3 Coarse Sand ) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete 23 Providing And Laying Polished Granite Jet Black Stone Flooring In Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building All Complete As Per The Architectural Drawings With 18 Mm Thick Stone Slab Over 20 Mm ( Average ) Thick Base Of Cement Mortar 1:4 ( 1 Cement: 4 Coarse Sand ) Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade Including Rubbing, Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer-In-Charge. 24 Providing Edge Moulding To 18 Mm Thick Marble Stone Counters, Vanities Etc., Including Machine Polishing To Edge To Give High Gloss Finish Etc. Complete As Per Design Approved By Engineer-In-Charge. ( Granite Work ) 25 Kota Stone Slab Flooring Over 20Mm ( Average ) Thick Base Laid Over And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab, Including Rubbing And Polishing Cmplete With Base Cement Mortar 1:4 ( 1 Cement: 4 Coarse Sand ) 25Mm Thick 26 Kota Stone Slab 20Mm Thick In Riser Of Steps, Skerting, Dado And Piller Laid On 12 Mm ( Average ) Thick Cement Mortar 1:3 ( 1 Cement : 3 Coarse Sand ) And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slabs, Including Rubbing Polishing Complete. 27 Providing And Fixing Isi Marked Flush Door Shuttrs Conforming To Is : 2202 ( Part-1 ) Decorative Type, Core Of Block Board Construction With Frame Of 1St Class Hard Wood And Well Matched Teak 3 Ply Veenering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Of Shutters Including Isi Marked Stainless Steel Butt Hinges With Necessary Screws, Steel Handles Sliding Bolt, Door Stopper And Tower Bolt. 35 Mm Thick 28 Providing & Fixing Decorative High Pressure Laminated Sheet Of Plain / Wood Grain In Gloss / Matt / Suede Finish With High Density Protective Surface Layer And Reverse Side Of Adhesive Bonding Quality Conforming To Is : 2046 Type S, Including Cost Of Adhesive Of Approved Quality. 29 Providing And Fixing Factory Made Single Extruded Wpc ( Wood Polymer Composite ) Solid Door / Window / Ceosetory Windows & Other Frames / Chowkhat Comprising Of Virgin Pvc Polymer Of K Value 58-60 ( Suspension Grade ) , Calcium Carbonate And Natural Fibers ( Wood Powder / Rice Husk / Wheat Husk ) And Non Toxic Additives ( Maximum Toxicity Index Of 12 For 100 Gms ) Fabricated With Miter Joints After Applying Pvc Solvent Cement And Screwed With Full Body Threaded Star Headed Ss Screws Having Minimum Frame Density Of 750 Kg / Cum, Screw Withdrawal Strength Of 2200 N ( Face ) & 1100 N ( Edge ) , Minimum Compressive Strength Of 58 N / Mm2, Modulus Of Elasticity 900 N / Mm2 And Resistance To Spread Offlame Of Class Acategorywith Property Of Being Termite / Borer Proof, Water / Moisture Proof And Fire Retardant And Fixed In Position With M.S Hold Fast / Lugs / Ss Dash Fasteners Of Required Dia And Length Complete As Per Direction Of Engineer-In- Charge. ( M.S Hold Fast / Lugs Or Ss Dash Fasteners Shall Be Paid For Separately ) . Note: For Wpc Solid Door / Window Frames, Minus 5Mm Tolerance In Dimensions I.Edepth And Width Of Profile Shall Be Acceptable. Variation In Profile Dimensions On Plus Side Shall Be Acceptable But No Extra Payment On This Account Shall Be Made. 30 Providing And Fixing Factory Made Panel Pvc Door Shutter Consisting Of Frame Made Out Of M.S. Tubes Of 19 Gauge Thickness And Size Of 19 Mm X 19 Mm For Styles And 15X15 Mm For Top & Bottom Rails. M.S. Frame Shall Have A Coat Of Steel Primers Of Approved Make And Manufacture. M.S. Frame Covered With 5 Mm Thick Heat Moulded Pvc C Channel Of Size 30 Mm Thickness, 70 Mm Width Out Of Which 50 Mm Shall Be Flat And 20 Mm Shall Be Tapered In 45 Degree Angle On Both Side Forming Styles And 5 Mm Thick, 95 Mm Wide Pvc Sheet Out Of Which 75Mm Shall Be Flat And 20 Mm Shall Be Tapered In 45 Degree On The Inner Side To Form Top And Bottom Rail And 115 Mm Wide Pvc Sheet Out Of Which 75 Mm Shall Be Flat And 20 Mm Shall Be Tapered On Both Sides To Form Lock Rail. Top, Bottom And Lock Rails Shall Be Provided Both Side Of The Panel. 10 Mm ( 5 Mm X 2 ) Thick, 20 Mm Wide Cross Pvc Sheet Be Provided As Gapinsert For Top Rail & Bottom Rail, Paneling Of 5 Mm Thick Both Side Pvc Sheet To Be Fitted In The M.S. Frame Welded / Sealed To The Styles & Rails With 7 Mm ( 5 Mm+2 Mm ) Thick X 15 Mm Wide Pvc Sheet Beading On Inner Side, And Joined Together With Solvent Cement Adhesive. An Additional 5 Mm Thick Pvc Strip Of 20 Mm Width Is To Be Stuck On The Interior Side Of The C Channel Using Pvc Solvent Adhesive Etc. Complete As Per Direction Of Engineer-In-Charge, ManufacturerS Specification & Drawing. 31 Providing And Fixing Factory Made 18 Mm Thick Single Extruded Wpc ( Wood Polymer Composite ) Solid Plain White Colour Board Jali, Cnc ( Computer Numeric Control ) Routed Of Approved Design By Engineer-In -Charge Which Aremachine Cut For Duct / Shaft Covering, Partitions And Facades Comprising Of Virgin Polymer Ofk Value 58-60 ( Suspension Grade ) , Calcium Corbonate And Natural Fibers ( Wood Powder / Rice Husk / Wheat Husk ) And Non Toxic Additives ( Maximum Toxicity Index Of 12 For 100 Gms ) Having Minimum Density Of 650 Kg / Cum And Screw Withdrawal Strength Of 1800 N ( Face ) Minimum Compressive Strength50 N / Mm2, Modulus Of Elasticity 850 N / Mm2 And Resistance To Spread Offlame Of Class Acategory With Properties Of Being Termite / Borer Proof, Water / Moisture Proof And Fire Retardant And Fixing On M.S ( Mild Steel ) Frame Made Of 25X 25 X 1.5 Mm Square Hollow Box Section Including Applying A Priming Coat Of Approved Steel Primer, Placed At Grid Made At 1.0 X 1.0 M Or As Per Requirement At Site With Necessary Stainless Steel Fasteners And Ss Screws Etc., All Complete As Per Direction Of Engineerin- Charge. ( Note: M.S ( Mild Steel ) Framework With Priming Coat And Necessary Ss Fasteners And Ss Screws Shall Be Paid Separately. Item No 26.91 32 Providing And Fixing Bright Finished Brass 100 Mm Mortice Latch And Lock, Isi Marked, With Six Levers And A Pair Of Anodised ( Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) Aluminium Lever Handles Of Approved Quality With Necessary Screws Etc. Complete. 33 Providing And Fixing Aluminium Handles, Isi Marked, Anodised ( Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete : 125Mm 34 Providing And Fixing Aluminium Hanging Floor Door Stopper, Isi Marked, Anodised ( Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) Transparent Or Dyed To Required Colour And Shade, With Necessary Screws Etc. Complete. Twin Rubber Stopper 35 Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised ( Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete : 250X10 Mm 36 Providing And Fixing Stone Jali 40 Mm Thick Throughout In Cement Mortar 1:3 ( 1 Cement : 3 Coarse Sand ) , Including Pointing In White Cement Mortar 1:2 ( 1 White Cement : 2 Stone Dust ) With An Admixture Of Pigment, Matching The Stone Shade, Jali Slab Without Any Chamfers Etc. Red Sand Stone 37 Providing And Laying Integral Cement Base Water Proofing Treatment Including Preparation Of Surface As Required For Treatment Of Roofs, Balconies, Terraces Etc. Consisting Of Following Operations: ( A ) Applying A Slurry Coat Of Neat Cement Using 2.75 Kg / Sqm Ofcement Admixed With Water Proofing Compound Conforming To Is 2645 And Approved By Engineer-In-Charge Over The Rcc Slab Adjoining Wall Upto 300 Mm Height Including Cleaning The Surface Before Treatment. ( B ) Laying Brick Bats With Mortar Using Broken Brick Bats 25Mm To 115 Mm Size With 50% Of Cement Mortar 1:5 ( 1 Cement : 5 Coarse Sand ) Admixed With Water Proofing Compound Conforming To Is: 2645 And Approved By Engineer-In-Charge To Required Slope And Treating Similarly The Adjoining Heights Upto 300Mm Height Including Rounding Of Junctions Of Walls And Slabs. ( C ) After Two Days Of Propoer Curing Applying A Second Of Cement Slurry Using 2.75 Kg / Sqm Of Cement Admixed With Water Proofing Compound Conforming To Is 2645 And Approved By Engineer-In-Charge. ( D ) Finishing The Surface With 20Mm Thick Jointless Cement Mortar Of Mix 1:4 ( 1 Cement : 4 Coarse Sand ) Admixed Water Proofing Compound Conforming To Is 2645 And Approved By Engineer In Charge Including Laying Glass Fibre Cloth Of Approved Quality In Top Layer Of Plaster And Finally Finishing The Surface With Trowel With Neat Cement Slurry And Making Pattern Of 300 X 300 Mm Square 3 Mm Deep. ( E ) The Whole Terrace So Finished Shall Be Flooded With Water For A Minimum Period Of Two Weeks For Curing And For Final Test . All Above Operations To Be Done In Order And As Directed And Specified By The Engineer-In-Charge With Average Thickness Of 120 Mm And Minimum Thickness At Khurra As 86Mm 38 Providing And Laying Water Proofing Treatment To Vertical And Horizontal Surfaces Of Depressed Portions Of W.C., Kitchen And The Like Consisting Of: ( I ) Ist Course Of Applying Cement Slurry @ 4.4 Kg / Sqm Mixed With Water Proofing Compound Onforming To Is 2645 In Recommended Proportions Including Rounding Off Junction Of Vertical And Horizontal Surface. ( Ii ) Iind Course Of 20 Mm Cement Plaster 1:3 ( 1 Cement : 3 Coarse Sand ) Mixed With Water Proofing Compound In Recommended Proportionincluding Rounding Off Junction Of Vertical And Horizontal Surface. ( Iii ) Iiird Course Of Applying Blown Or Residual Bitumen Applied Hot At 1.7 Kg.Per Sqm Of Area ( Iv ) Ivth Course Of 400 Micron Thick Pvc Sheet. ( Overlaps At Joints Of Pvc Sheet Should Be 100 Mm Wide And Pasted To Each Other With Bitumen @ 1.7 Kg / Sqm ) 39 Providing Gola 75X75 Mm In Cement Concrete 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Stone Aggregate 10 Mm And Down Gauge ) , Including Finishing With Cement Mortar 1:3 ( 1 Cement : 3 Fine Sand ) As Per Standard Design :In 75X75 Mm Deep Chase 40 Making Khurras 45X45 Cm With Average Minimum Thickness Of 5 Cm Cement Concrete 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate Of 20 Mm Nominal Size ) Over P.V.C. Sheet 1 M X 1 M X 400 Micron, Finished With 12 Mm Cement Plaster 1:3 ( 1 Cement : 3 Coarse Sand ) And A Coat Of Neat Cement, Rounding The Edges, Making And Finishing The Outlet Complete. 41 Providing And Fixing On Wall Face Unplasticised Rigid Pvc Rain Water Pipes Conforming To Is : 13592 Type A, Including Jointing With Seal Ring Conforming To Is : 5382, Leaving 10 Mm Gap For Thermal Expansion, ( I ) Single Socketed Pipes. 110Mm Dia 42 Providing And Fixing Water Closet Squatting Pan ( Europentype W.C. Pan Isi Mark ) With Seat And Lid 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, Manually Controlled Device ( Handle Lever ) Conforming To Is :7231, With All Fitting And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required. White Vitreous China Orissa Pattern W.C. Pan Of Size 580X440mm With Integral Type Foot Rests Including Stop Cock Complete In All Respect. 43 Providing And Fixing Water Closet Squatting Pan ( Indian Type W.C. Pan ) With 100 Mm Sand Cast Iron P Or S Trap, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device ( Handle Lever ) Conforming To Is : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required: White Vitreous China Orissa Pattern W.C. Pan Of Size 580X440 Mm With Integral Type Foot Rests 44 Providing And Fixing Wash Basin ( Isi Mark ) With C.I. Brackets, 15 Mm C.P. Brass Pillar Taps, 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Require. White Vitreous China Chine Wash Basin Size ( 630X450 ) Mm With Single 15Mm Cp Brass Pillar Tap. ( Item No.- 3B / 24 ) 45 Providing & Fixing Pvc Waste Pipe Or Sink Or Wash Basin Including Pvc Waste Fittings Complete. Flexible Pipe 40 Mm Dia 46 P / F 100X75mm / 100 Mm Dia Pvc Nehani Trap1369 47 P / F Stainlessb Steeljali Of 100X100mm Sqm / 100 Mm Dia Ch-23 / 30 48 Providing & Fixing P.V.C. Pipe Confirming To Is Make Working Pressure 6Kg / Sqcm Including Testing Labour T&P And All Complete Fittings110mm Dia 49 140Mm Dia 50 Providing And Fixing Chlorinated Polyvinyl Chloride ( Cpvc ) Pipes, Having Thermal Stability For Hot And Cold Water Supply, Including All Cpvc Plain And Brass Threded Fittings Including Fixing With Clamps At 1M Spacing. This Includes Jointing Of Pipes And Fittings, With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer-In-Charge. Concealed Work, Including Cutting Chases And Making Good The Wall Etc. 20 Mm Dia ( Iner Fitting ) 51 32Mm Dia ( Outer Fitting ) 52 Providing & Fixing Gun Metal Gate Valve With C.I. Wheel Of Approved Quality ( Screwed End ) . S.I No 23.15 32Mm Dia32mm Dia 53 Providing And Fixing C.P. Brass Bib Cock Of Approved Quality Confirming To Is 8931 :- 15Mm Nominal Bore 54 Providing And Fixing C.P. Brass Long Nose Bib Cock Of Approved Quality And Confirming To Is Standerds And Weighing Not Less Than 810Gms:- 15Mm Nominal Bore 55 Providing And Fixing C.P. Brass Stop Cock ( Concealed ) Of Standerd Design And Of Approved Make Confirming To Is8931:- 15Mm Nominal Bore 56 Constructing Brick Masonry Chamber For Underground C.I. Inspection Chamber And Bends With Bricks In Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) C.I. Cover With Frame ( Light Duty ) 500 X 700 Mm Internal Dimension 45 Cm Deep For Pipe Line With One Or Two Inlets : With Common Burnt Clay F.P.S. ( Non Modular Bricks Of Class Designation M-150, Total Weight Of Cover With Frame To Be Not Less Than 38Kg ( Weight Of Cover 23 Kg And Weight Of Frame 15Kg ) , Rcc Top Slab With 1:2:4 Mix ( 1 Cement : 2 Coarse Sand : Graded Stone Aggregate 20 Mm Nominal Size ) Foundation Concrete 1:5:10 ( 1 Cement : 5 Fine Sand : 10 Graded Stone Aggregaet 40 Mm Nominal Size ) Inside Plastering 12Mm Thick With Cement Mortar 1:3 ( 1 Cement : 3 Coarse Sand ) , Finished Smooth With A Floating Coat Of Neat Cement On Walls And Bed Concrete Etc. Complete As Per Standard Design. 57 S / F Water Storage Tank P.V.C Syntax Or Equivalent Make Including Float Value, Connecting Rod Of Brass, Etc All Complete. Ch.-19 / 2 58 P / F Mirror Of Superior Glass And Of Rectangle 453X357mm In Size With Plastic Moulded Frame Of Approved Make And Shade With 6Mm Thick Hard Board Backing . As Item No 24.23 59 Wiring Point For Light With 1.5 Sq.Mm.Frlshpvcinsulated Multistrand Single Core Copper Conductor Cablein Heavy Guage Rigid Steelconduit Pipe Partly Concealed In The Walland Partly Laidinslab Alongwith The Reinforcement Before Concreting, Complete With 14 Swg Copper Earth Continuity Wire, Gp Box , Piano Type Switch & Ceiling Rose / Angle / Batten Holder On 3Mm Thickphenolic Paminated Backalite Sheet Etc Complete In All Respect As Directed Including Matching Colour Wash. 60 Wiring Point For Fan / Fresh Air Fan ( Light Duty Exhaust Fan ) With 1.5 Sq.Mm.Frlsh Pvc Insulated Multistrand Single Core Copper Conductor Cable In Pvc Conduit Partly Concealed In Wall And Partly Laid In Slab Alongwith The Reinforcement Before Concreting, Complete With 14 Swg Copper Earth Continuity Wire, Gp Box , Piano Type Switch & Ceiling Rose On 3 Mm. Thick Backelite Sheet Etc., Complete In All Respect Including Matching Colour Wash. ( B ) But In Pvc Conduit With 1.5 Sq. Mm.Frlsh Pvc Insulated Multistrand Copper Conductor Cable As Earthwire Drawn Inside The Conduit. 61 Wiringpointforplugwith 1.5 Sq. Mm.Frlsh Pvc Insulated Multistrand Single Core Copper Conductor Cable Inpvc Conduit Partly Concealed In Wall And Partly Laid In Slab Alongwith The Reinforcementbefore Concreting, Complete With14 Swg Copper Earth Continuity Wire And Piano Typeswitch And Socket Etc., Complete In All Respect Including Matching Colour Wash. But In Pvc Conduit With 1.5 Sq. Mm.Frlsh Pvcinsulatedmultistrandcopperconductorcable Asearthwire Drawninside The Conduit. 62 Wiring Point For Exhaustfan With 1.5 Sq. Mm.Frlshpvc Insulated Multistrand Single Core Copper Conductor Cable In Pvc Conduit Partly Concealed In Wall And Partly Laid In Slab Alongwith The Reinforcement Before Concreting, Complete With 14 Swg Copper Earth Continuity Wire, Gp Box , 15A Piano Type Switch& Ceiling Rose On 3 Mm Thick Phenolic Laminated Backelite Sheet Etc., Complete In All Respect Including Matching Colour Wash. But In Pvc Conduit With 1.5 Sq. Mm.Frlsh Pvc Insulated Multistrand Copper Conductor Cable Asearthwiredrawn Inside The Conduit. 63 Same As In Item 174 ( B ) But For Plug Point With 5 Amp Flush Typeswitch And 3 Pin Socket And Earth Continuity Wire Of1.5 Sq.Mm. Frlsh Pvc Insulated Multi Strand Copperconductor Cable. 64 Add For Light / Fan Points With Modular Type Switch In Place Of Piano Type Switch. 65 Add For Hpmv / Exhaust Fan Point With Modular Type Switch In Place Of Piano Type Switch. 66 Wiring For Circuit / Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface / Recessed Pvc Conduit As Required.2 X 1.5 Sq. Mm + 1 X 1.5 Sq. Mm Earth Wire 67 Supply And Wiring Of Submain With Two Number2.5Sq.Mm. Frlsh Pvc Insulated 1100 V Grade Multistrand Single Core Copper Conductor Cable In 20 Mm Dia Heavy Guage Rigid Steel Conduit Partly Laid In Slab Alongwith Reinforcement Before Concreting And Partly Concealed In Wall, With One No. 14 Swg Copper Earth Continuity Wireetc, Complete In All Respects Including Matching Colour Wash. 68 Supply And Wiring Of Submain Withtwo Number 4 Sq.Mm. Frlsh Pvc Insulated 1100 V Grade Multistrand Single Core Copper Conductor Cable In 20 Mm Dia Heavy Guage Rigid Steel Conduitpartly Concealedinwall Andpartlylaid In Slab Alongwith Reinforcement Before Concreting, With One Number 14 Swg Copper Earth Continuity Wire Including Matching Colour Washetc. Complete In All Respect. 69 Supply And Fixing Ofrecess / Surface / Pendentmounting Round6 Watt 8 Watt Led Down Lighter Having Powder Coateddie Cast Aluminiumhousing Withheat Sink, Diffuser / Reflectorand Driver Set Complete In All Respect. Cat- Aaa 70 Supply And Fixing Ofrecess / Surface / Pendentmounting Round 15 Watt Led Down Lighter Having Powder Coateddie Cast Aluminium Housing Withheat Sink, Diffuser / Reflector And Driver Set Complete In All Respect. Cat- Aaa 71 Supply And Fixing Of Batten / Angleholder Complete In All Respect. 72 Supply And Fixing Ofled Tube Light With Batten Suitable For Up To 1 X 22 Watt Led Tube Light Fittingincluding Tube On Surface Complete In All Respect.Cat- Aaa 73 Supplyandlayingof Aluminiumconductorpvcinsulated Armoured Served Sheathed Cables 1100 Volts Grade At A Depth Of 750 Mm Below Ground Level Over A Cushion Of 75 Mm. Thick Sand All Around And Protected With Burnt Bricks On Sides And On Top. On Surface The Cable Run Shall Be Fixed On M.S. Clamps Etc. Of Suitable Size Or As Directed By The Engineer-Incharge, Complete In All Respect. The Armouring Of The Cable Shall Be Properly Connected With The Earth Conductor By Clamps Etc. 6 Sq. Mm 4 Core 74 16 Sq. Mm 4 Core 75 50 Sq. Mm 3.5 Core 76 Supply And Fixing Of Brass Nickle Plated Compression Gland For Pvc Insulated & Armoured Served Sheathed, Underground Cable Including Rubber Ring Etc. Complete In All Respect. The Armouring Ofthe Cable Shall Be Properly Connected With The Earth As Per Direction Of Engineer-Incharge.6 Sq. Mm 4 Core 77 16 Sq. Mm 4 Core 78 50 Sq. Mm 3.5 Core 79 Supply And Fixing Of Plain Or Pin Type Copper Tin Plated Cable Socket ( Lug ) To The Cable Leads, Insulating With Tape And Making Connection Etc. Complete In All Respect As Per Direction Of The Engineer-Incharge.6 Sq. Mm 80 16 Sq. Mm 81 25 Sq. Mm 82 50 Sq. Mm 83 Supply And Burying Of 600Mm X 600Mm X 6Mm G.I. Plate Vertically For Earthing With Its Top At Least 3 Metres Below Ground Level Complete With 20Mm Dia G.I. Pipe And Funnel For Watering And One Earthing Lead Oftwo No. 8 To 10 Swg Gi Wire In 15Mm Dia G.I. Pipe Up To Switch Board ( From Appron To Switch Board The Cost Of G.I. Pipe And G.I. Wire Will Be Extra ) 30Cm Square C.I. Frame With Hinged Cover Masonry Housing Alternate Layers Of Charcoal / Coke And Salt At Least 150Mm Thick Alround Etc. As Per Directions Of Engineer-In-Charge Complete In All Respect. 84 Supply And Laying Of 25Mm X 3Mm G.I. Strip From Earth Electrode Directly In The Ground As Required Complete In All Respect. 85 S & F Surface / Flush Mounting 6Ways Tpn Distribution Board With Additional Metal Doorwithout Mcb Complete In All Respect, As Directed At Site Byengineer In Charge. Cat-A 86 S&F Of6 Amp. To 32Amp. Dp Mcb ( 10 Ka ) C Curvecat-A 87 S&F Of 6 Amp. To 32Amp. 4 Pole Mcb ( 10 Ka ) C Curve Cat-A 88 S&F Of 40Amp. 4 Pole Mcb ( 10 Ka ) C Curve Cat-A 89 S&F Of 63Amp. 4 Pole Mcb ( 10 Ka ) C Curve Cat-A 90 Supply And Fixing Of 16 Swg M.S. Drum With Luvers Duly Painted Including Making Hole In The Wall For Exhaust Fan And Finishing Properly Complete In All Respect. 91 Supply And Laying Of 1800Mm X 900Mm X 12Mm Thick Chequered Rubbbber Matting Of Tested Quality. 92 Supplying And Laying Of Following Size Dwc Hdpe Pipe Isi Marked Along With All Accessories Like Socket, Bend, Couplers Etc. Conforming To Is 14930, Part Ii Complete With Fitting And Cutting, Jointing Etc.Direct In Ground ( 75 Cm Below Ground Level ) Including Excavation And Refilling The Trench But Excluding Sand Cushioning And Protective Covering Etc., Complete As Required.200 Mm Dia ( Od-200 Mm & Id-175 Mm Nominal )

INR 5900 /-

INR 940000.0 /-

Refer document

Name of Work:development of pink toilet in vrindan mathura (UP)

Sl. No.	Item Description
1	Earth work in excavation in foundation in ordinary soil (loam, clay, or sand) including lift upto 1.5 m and lead up to 30 m and including filling watering ramming of excavated earth in to the trenches or in to the space between the building and the sides of the foundation trenches or into the space between the building and the side of the foundation or in the plinth and removal of surplus earth as directed by E/I upto a distance of 30m.from the foundation trenches.
2	Earth work in cutting including cartage 5km distance or in embankment in ordinary soil excavation to be in the form of a regular pits not exceeding 0.50m in depth and earth work in embankment to be in 20cm layers including ramming and dressing the surface to required levels and slopes and also including 1.5 m lift and 30m lead. The earth in form of cutting (b) to be used as spoil banks within 50m distance as directed by the Engineer-in-Charge
3	Extra for Earth work in embankment mechanically compacted to 95% proctor density In ordinary soil, excavation to be done form of regular pits not exceeding 0.5mtr in depth and work embankment to be in 20cm layer including ramming and dressing pulveerzation the surf Including Supply of Labour, T&P, Roller and water sprinkler
4	Provides & laying cement concrete in 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) & curing complete, including cost of form work in foundation and under floors.
5	Providing and laying in position machine batched and machine mixed design mix, M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying and including the cost of centering, shuttering, finishing but excluding reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in- charge. (Note: Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately).All Work up to Plinth Lvl.
6	All Works above plinth Level upyo floor V floor
7	Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, including the cost of centering, shuttering, finishing and excluding reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III): 3 graded stone aggregate 20 mm nominal size).
8	Reinforcement of Reinforced concrete or reinforced brick work brought to required shape as necessary including bending for proper completion of the work and including the supply of steel and its waistage Bend, hooks, Binding wire and authorized over lapping shall be measured upto floor two level etc complete as per MoRT&H Specifications 12.40 (1600)
9	Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
10	Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
11	Class M150 (non Modular) brick work in1:4 cement and coarse sand mortar in foundation and plinth including supply of all material, labour and T&P etc. required for proper completion of the work.
12	Class-150 (non Modular) brick workbut in in1:4 cement and coarse sand mortar super structure above plinth level upto floor five level (upto five stories) including necessary cutting and moulding of brick work as required and also including honey combed brick work in thickness of wall more than 12 cm.
13	12mm cement plaster with cement mortar in proportion of 1:4 cement & coarse sand of single coat for interior plastering upto floor two level including internal rounded angles chamfers and rounded angles not exceeding 80mm. In girth and finished even and smooth
14	15mm cement plaster with cement mortar in proportion of 1:6 cement & coarse sand of single coat for interior plastering upto floor two level including internal rounded angles chamfers and rounded angles not exceeding 80mm. In girth and finished even and smooth
15	6mm Celling plaster 1:3 (1 cement: 3 fine sand) cement & fine sand in F.M. not less than 1.25, 1:3 including chiping of RCC surface before ceiling plaster. The cost of including all material, labour T&P and scafolding etc. complete
16	Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
17	Providing and applying of Heritage GRIT FINISH, a surface texture paint after applying corresponding roller coat brush finish as heritage primer on pre plasterd surface to be smooth level without any undulations,color scheme as per approved sample in approved shade.Grit is a two component system of natural marble chips 25 kg and 5 kg of Bonding agent (100% pure Acryalic emulsion). The composition of texture paint consits of grit, made of natural marble chips,no pigment added matt finish.flame retardant resistance to fungal and algal attacks The first coat (primer )should be applied by brush or wool roller as base coat, diluted with sufficient water and the next coat a final coat to be applied with trowel and properly finished. The thickness of both coat should be 1.00 mm to 1.50 mm.Application to be carried out by company"s Authorised Dealer
18	Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer including supply of all Material and T&P required for proper completion of work
19	Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new workincluding supply of all Material and T&P required for proper completion of work. Wood & steel.
20	Providing and laying Vertified Tiles in floor without lean concrete of 600x600mm sizes (thickness 10mm) with water absorption less than 0.08% and confirming to IS: 15622, of approved brand manufacture, in desired colour and shades, laid with cement Based high polymer modified quit set tile adhesive (water Based) confirming to IS :15477, including grouting of joints
21	Providing and laying anti skid Vertified Tiles in floor without lean concrete of 600x600mm sizes (thickness 10mm) with water absorption less than 0.08% and confirming to IS: 15622, of approved brand manufacture, in desired colour and shades, laid with cement Based high polymer modified quit set tile adhesive (water Based) confirming to IS :15477, including grouting of joints
22	Providing and fixing 1st quality ceramic glazed Wall tiles confirming to IS: 15622 (thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skerting, riser of step and dados over 12 mm thick bed of cement mortar 1:3 (1 Cement :3 Coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete
23	Providing and laying Polished Granite jet Black stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
24	Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. (Granite work)
25	Kota Stone slab flooring over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing cmplete with base cement mortar 1:4 (1 cement: 4 Coarse sand) 25mm thick
26	Kota Stone slab 20mm thick in riser of steps, skerting, dado and piller laid on 12 mm (average) thick Cement mortar 1:3 (1 Cement : 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing polishing complete.
27	Providing and fixing ISI marked flush door shuttrs conforming to IS : 2202 (Part-1) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veenering with vertical grains or cross bands and face veneers on both faces of shutters including ISI marked stainless steel butt hinges with necessary screws, steel handles sliding bolt, door stopper and tower bolt. 35 mm thick
28	Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.
29	Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/ mm2 and resistance to spread offlame of Class Acategorywith property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.edepth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
30	Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC "C" channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the "C" Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer"s specification & drawing.
31	Providing and fixing factory made 18 mm thick single extruded WPC (Wood Polymer Composite) solid plain white colour board Jali, CNC (Computer numeric control) routed of approved design by Engineer-in -charge which aremachine cut for duct/shaft covering, partitions and facades comprising of virgin polymer ofK value 58-60 (Suspension Grade), calcium corbonate and natural fibers (wood powder/ rice husk/wheat husk)and non toxic additives(maximum toxicity index of 12 for 100 gms)having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) minimum compressive strength50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread offlame of Class Acategory with properties of being termite/borer proof, water/moisture proof and fire retardant and fixing on M.S (mild steel) frame made of 25x 25 x 1.5 mm square hollow box section including applying a priming coat of approved steel primer, placed at grid made at 1.0 x 1.0 m or as per requirement at site with necessary stainless steel fasteners and SS screws etc., all complete as per direction of EngineerIn- Charge. (Note: M.S (mild steel) framework with priming coat and necessary SS fasteners and SS screws shall be paid separately. Item no 26.91
32	Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete.
33	Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125mm
34	Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper
35	Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 250x10 mm
36	Providing and fixing stone jali 40 mm thick throughout in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment, matching the stone shade, jali slab without any chamfers etc. Red sand stone
37	Providing and laying integral cement base water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc. consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm ofcement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge over the RCC slab adjoining wall upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken brick bats 25mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining heights upto 300mm height including rounding of junctions of walls and slabs. (c) After two days of propoer curing applying a second of cement slurry using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20mm thick jointless cement mortar of mix 1:4 (1 cement : 4 coarse sand) admixed water proofing compound conforming to IS 2645 and approved by Engineer in charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300 x 300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test . All above operations to be done in order and as directed and specified by the Engineer-in-charge with average thickness of 120 mm and minimum thickness at khurra as 86mm
38	Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound onforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportionincluding rounding off junction of vertical and horizontal surface.(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg.per sqm of area (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm)
39	Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :In 75x75 mm deep chase
40	Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges, making and finishing the outlet complete.
41	Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110mm dia
42	Providing and fixing water closet squatting pan (Europentype W.C. pan ISI mark) with seat and lid 10 litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS :7231, with all fitting and fixtures complete, including cutting and making good the walls and floors wherever required. white vitreous china orissa pattern W.C. pan of size 580x440mm with integral type foot rests including stop cock complete in all respect.
43	Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
44	Providing and fixing wash Basin (ISI mark) with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require. White vitreous china chine wash Basin size (630X450) mm with single 15mm cp brass pillar tap. (item no.- 3b/24)
45	Providing & fixing PVC waste pipe or sink or wash basin including PVC waste fittings complete. Flexible pipe 40 mm dia
46	P/f 100x75mm/ 100 mm dia PVC nehani trap1369
47	P/f Stainlessb Steeljali of 100x100mm sqm / 100 mm dia ch-23/30
48	Providing & fixing P.V.C. pipe Confirming to IS make working pressure 6kg/sqcm including testing labour T&P and all complete fittings110mm dia
49	140mm dia
50	Providing and fixing chlorinated polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threded fittings including fixing with clamps at 1m spacing. This includes jointing of pipes and fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge. Concealed work, including cutting chases and making good the wall etc. 20 mm dia (iner fitting)
51	32mm dia (outer fitting)
52	Providing & fixing gun metal gate valve with C.I. wheel of approved quality (screwed end). S.I No 23.15 32mm dia32mm dia
53	Providing and fixing C.P. brass bib cock of approved quality Confirming to IS 8931 :- 15mm nominal bore
54	Providing and fixing C.P. brass long nose bib cock of approved quality and Confirming to IS standerds and weighing not less than 810gms:- 15mm nominal bore
55	Providing and fixing C.P. brass stop cock (Concealed) of standerd design and of approved make confirming to IS8931:- 15mm nominal bore
56	Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 500 x 700 mm internal dimension 45 cm deep for pipe line with one or two inlets : with common burnt clay F.P.S. (non modular bricks of class designation M-150, total weight of cover with frame to be not less than 38kg ( weight of cover 23 kg and weight of frame 15kg), RCC top slab with 1:2:4 mix (1 cement : 2 coarse sand : graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregaet 40 mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design.
57	S/F Water storage tank P.V.C syntax or equivalent make including float value, connecting Rod of brass, etc all complete. Ch.-19/2
58	P/f mirror of superior glass and of rectangle 453x357mm in size with plastic moulded frame of approved make and shade with 6mm thick hard board Backing . As item no 24.23
59	Wiring point for light with 1.5 sq.mm.FRLSHPVCinsulated multistrand single core copper conductor cablein heavy guage rigid steelconduit pipe partly concealed in the walland partly laidinslab alongwith the reinforcement before concreting, complete with 14 SWG copper earth continuity wire,GP Box , piano type switch & ceiling rose/angle/batten holder on 3mm thickphenolic paminated backalite sheet etc complete in all respect as directed including matching colour wash.
60	Wiring point for fan / fresh air fan (light duty exhaust fan) with 1.5 sq.mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit partly concealed in wall and partly laid in slab alongwith the reinforcement before concreting, complete with 14 SWG copper earth continuity wire,GP Box , piano type switch & ceiling rose on 3 mm. thick backelite sheet etc., complete in all respect including matching colour wash. (B) but in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit.
61	Wiringpointforplugwith 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable inPVC conduit partly concealed in wall and partly laid in slab alongwith the reinforcementbefore concreting, complete with14 SWG copper earth continuity wire and piano typeswitch and socket etc., complete in all respect including matching colour wash. but in PVC conduit with 1.5 sq. mm.FRLSH PVCinsulatedmultistrandcopperconductorcable asearthwire drawninside the conduit.
62	Wiring point for exhaustfan with 1.5 sq. mm.FRLSHPVC insulated multistrand single core copper conductor cable in PVC conduit partly concealed in wall and partly laid in slab alongwith the reinforcement before concreting, complete with 14 SWG copper earth continuity wire,GP Box , 15A piano type switch& ceiling rose on 3 mm thick phenolic laminated backelite sheet etc., complete in all respect including matching colour wash. but in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable asearthwiredrawn inside the conduit.
63	Same as in item 174(B) but for plug point with 5 Amp flush typeswitch and 3 pin socket and earth continuity wire of1.5 sq.mm. FRLSH PVC insulated multi strand copperconductor cable.
64	Add for light / fan points with modular type switch in place of piano type switch.
65	Add for HPMV/Exhaust fan point with modular type switch in place of piano type switch.
66	Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
67	Supply and wiring of submain with two number2.5sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy guage rigid steel conduit partly laid in slab alongwith reinforcement before concreting and partly concealed in wall, with one no. 14 SWG copper earth continuity wireetc, complete in all respects including matching colour wash.
68	Supply and wiring of submain withtwo number 4 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy guage rigid steel conduitpartly concealedinwall andpartlylaid in slab alongwith reinforcement before concreting, with one number 14 SWG copper earth continuity wire including matching colour washetc. complete in all respect.
69	Supply and fixing ofrecess/Surface/Pendentmounting round6 Watt 8 Watt LED Down Lighter having Powder coateddie cast aluminiumhousing withheat sink, diffuser/ Reflectorand driver set complete in all respect. CAT- AAA
70	Supply and fixing ofrecess/ Surface/ Pendentmounting round 15 Watt LED Down Lighter having Powder coateddie cast aluminium housing withheat sink, diffuser/ Reflector and driver set complete in all respect. CAT- AAA
71	Supply and fixing of batten / angleholder complete in all respect.
72	Supply and fixing ofLED Tube Light with batten suitable for up to 1 X 22 watt LED tube light fittingincluding tube on Surface complete in all respect.CAT- AAA
73	Supplyandlayingof aluminiumconductorPVCinsulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 6 sq. mm 4 core
74	16 sq. mm 4 core
75	50 sq. mm 3.5 core
76	Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring ofthe cable shall be properly connected with the earth as per direction of Engineer-Incharge.6 sq. mm 4 core
77	16 sq. mm 4 core
78	50 sq. mm 3.5 core
79	Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge.6 sq. mm
80	16 sq. mm
81	25 sq. mm
82	50 sq. mm
83	Supply and burying of 600mm x 600mm x 6mm G.I. plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe and funnel for watering and one earthing lead oftwo no. 8 to 10 SWG GI wire in 15mm dia G.I. pipe up to switch board (from appron to switch board the cost of G.I. pipe and G.I. wire will be extra) 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respect.
84	Supply and laying of 25mm x 3mm G.I. strip from earth electrode directly in the ground as required complete in all respect.
85	S & F surface/Flush mounting 6ways TPN distribution board with additional metal doorwithout MCB complete in all respect, as directed at site byEngineer in charge. Cat-A
86	S&F of6 Amp. to 32Amp. DP MCB (10 KA) C CurveCat-A
87	S&F of 6 Amp. to 32Amp. 4 pole MCB (10 KA) C Curve Cat-A
88	S&F of 40Amp. 4 pole MCB (10 KA) C Curve Cat-A
89	S&F of 63Amp. 4 pole MCB (10 KA) C Curve Cat-A
90	Supply and fixing of 16 SWG M.S. drum with luvers duly painted including making hole in the wall for exhaust fan and finishing properly complete in all respect.
91	Supply and laying of 1800mm x 900mm x 12mm thick chequered rubbbber matting of tested quality.
92	Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.200 mm dia (OD-200 mm & ID-175 mm nominal)