Military Engineer Services-MES has published Tender For Repairs And Mechanised Cleaning Of Sewage Lines, Manholes, Septic Tanks, Filter Bed, Repairs To Drain, Compound Wall, Fencing Hard Standing And Repairs To Flooring, Joinery, Plumbing And Sanitary Fittings For Otm And Md Accn At Dgqa Complex Und. Submission Date for this Tender is 16-10-2023. Desilting Tenders in Chennai Tamil Nadu. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 04-Oct-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 11-10-2023 |
| 2 | 11-Oct-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 16-10-2023 |
| Sl. No. | Item Description |
| 1 | Note : - The cleaning of Septic tank, soak pits, Man holes and Sewer lines shall be done mechanically with all safety preventive measures for the workmen employed and cost of the same including accidental coverage insurance shall be deemed to be included in the unit rate quoted in corresponding items. |
| 2 | Demolition of cement concrete (unreinforced) in ground floor and paving not exec 15cm thickness (below or above ground level) and removing the debris as directed. |
| 3 | Demolition of brickwork built in cement mortar including all quoins, arches, pillars, etc, complete all as directed |
| 4 | M&L for PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in filling, foundation and mass concrete |
| 5 | M&L for brick work with old size Fly ashbricks in CM 1:4 straight or curved on plan exec 6 m mean radius |
| 6 | M&L brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 |
| 7 | M&L for rendering15 mm thick in CM 1:4, on fair faces of brick work, including finishing the surface even and smooth without using extra cement with LWPC Note: LWPC shall be measured and paid separately |
| 8 | M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in coping and benching incl weathering slightly rounded or chamfered angles and throating as directed including form work all as directed. |
| 9 | Extra for forming to fair finished to drains or channel 60 cm inner girth in cement concrete using extra cement, including forms moulds mitred/stopped ends etc |
| 10 | S&F 75mm PVC (SWR) floor trap, plain with grating incl jointing with solvent cement etc., complete. |
| 11 | S&F PVC (SWR) pipes single socketed 75mm bore of class B, in any length with rubber ring joints laid in trenches or floors or in walls all as specified. |
| 12 | S&F PVC (SWR) bends 75mm bore |
| 13 | S&F PVC (SWR) bends with access door 75mm bore |
| 14 | S&F 75mm PVC (SWR) branch piece, single (single Y) equal or unequal with access door |
| 15 | S&F PVC SWR vent cowl 75mm bore |
| 16 | S&F PVC (SWR) pipes single socketed 110mm bore of class B, in any length with rubber ring joints laid in trenches or floors or in walls all as specified. |
| 17 | S&F PVC (SWR) bends 110mm bore |
| 18 | S&F PVC (SWR) bends with access door 110mm bore |
| 19 | S&F 110mm PVC (SWR) junction single (single T) equal or unequal with access door. |
| 20 | S&F PVC SWR vent cowl 110mm bore |
| 21 | Dismantling fencing wire mesh of any type |
| 22 | Dismantling posts or struts (wood, steel or R.C.C.) any section embedded in concrete, including taking out embedded portion and making good disturbed ground |
| 23 | Material and labour for PCC 1:3:6 type C-2 using 40mm graded stone aggregate foundations, filling and mass concrete all as specified. |
| 24 | Fixing only chain link fencing including line wires, any mesh, size and type of standards, rails, straining bolts, etc. |
| 25 | Supply only PVC coated chain link fencing galvanised any size or type. |
| 26 | S&F framed brackets of angles, tees or flat Iron with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exec 10 kg each brackets, conforming to Fe.290.Gde-E-165 |
| 27 | Supply and fix 10mm dia MS round bars Gde IS-432 (Part-I) including welding with necessary lapping all as directed |
| 28 | Supply and fix Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exec 5cm but n exec 10cm long with diameter of shank 11 to 15mm all as specified |
| 29 | M&L preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10cm width or girth applying two coats of synthetic enamel paint over one coat of prink primer |
| 30 | M&L for two coats of synthetic enamel paint over a coat of red oxide primer to new steel surface including preparation of surfaces of any description over 10cm width or girth all as specified and as directed |
| 31 | M&L two coats of synthetic enamel paint over a coat of red oxide primer to new steel surface including preparation of surfaces of any description n.exc 10cm width or girth all as specified and as directed |
| 32 | Supply and fix in repairs Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) |
| 33 | M&L for providing 100mm thick, PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base of floors and pavings etc., all as specified and as directed |
| 34 | M&L for sand filling under floors or in foundations including watering and consolidation |
| 35 | M&L for machine pressed pre cast rubber finished coloured PCC interlocking paver block any shape and size conforming toIS 15658-2006 of 60mm thickness, M-35 Grade of cement concrete of with grey cement and pigment all as specified and directed. |
| 36 | M&L for chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment incl 15mm thick cement screed bed in CM 1:6 |
| 37 | M&L for PCC 1:3:6 75mm thick C-2 type using 40mm graded stone aggregate as in plinth protection/ hard standing finishing cement concrete surface even and smooth without using extra cement. |
| 38 | Removing of drain cover slab of any size and replacing same after removing mud/silt etc including making good the damaged surfaces with PCC/ plastering all as directed Note:- Removal of Mud/ silt will be measured and Paid Separately. |
| 39 | Removing accumulated silt/ mud/ vegetation of any kind inside the drain, scrapping, digging etc by any means manually and disposing the same at a level n.exc 1.50m above the starting pointat a distance n.exc 1.0km and cleaning the surroundings of the drain complete all as specified and directed. |
| 40 | M&L for cutting down plants/trees of up to 10cm girth and applying ROUNDUP/GLYPOCET or equivalent (Herbal medicine) to roots of roof tops/sides, external walls of bldg chajjas, wall junctions, at junctions of rain water/CI waste water pipe junction including taking out possible quantities of roots entered in wall/slab surfaces and making good the surfaces including repairing the GI /CI/ ACC/ PVC pipe joints of that affected locations after applying herbal medicining making good to suit the adjoining surfaces shall be carried out using PCC (1:2:4) type "B1" or cement mortar 1:2 with necessary scaffolding/staging etc upto a height of 7.00m from the ground level all as directed and as specified. |
| 41 | M&L for cutting down plants/trees of girth exec 10cm and n.exc 15 cm and applying ROUNDUP/GLYPOCET or equivalent (Herbal medicine) to roots of roof tops/sides, external walls of bldg chajjas, wall junctions at junctions of rain water/CI waste water pipe junction including taking out possible quantities of roots entered in wall/slab surfaces and making good the surfaces including repairing the GI/CI/ACC/PVC pipe joints of that affected locations after applying herbal medicining making good to suit the adjoining surfaces shall be carried out using PCC (1:2:4) type "B1" or cement mortar 1:2 with necessary scaffolding/staging etc upto a height of 7.00m from the ground level all as directed and as specified. |
| 42 | Earth work in excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m inwidth or 10Sqm on plan), including dressing of sides and ramming of bottom lift upto 1.5 m, including getting out excavated soil and disposal of surplus soil as directed with in a lead of 50 m as in Hard and dense soil. |
| 43 | Returning, filling in, including spreading, levelling watering and well ramming in layers n.exc 25cm with excavated soils all as specified. |
| 44 | Taking down cement plaster on brick wall including raking out joint hacking for key scrubbing down with water etc. |
| 45 | Supply only Liquid Water proofing compound (LWPC) |
| 46 | Demolition of reinforced cement concrete in any position and description (reinforcement to be cut as required to facilitate demolition) |
| 47 | M&L for providing precast cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate, as in man hole covers and set in cement mortar 1:6. Note :- Reinforcement shall be measured and paid separately. |
| 48 | M&L for MS TMT bars 10 mm dia and over cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia. |
| 49 | M&L for plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate in foundations, filling and mass concrete all as specified. |
| 50 | M&L for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in beds of drain all as specified . |
| 51 | Demolition and breaking up 150 mm dia (salt glazed ware, AC or Reinforced concrete) pipe jointed in cement mortar and disposed off the premises all as directed. |
| 52 | Demolition and breaking up 200 mm dia (salt glazed ware, AC or Reinforced concrete) pipe jointed in cement mortar and disposed off the premises all as directed. |
| 53 | M&L for PCC 1:3:6, type C-2 using 40mm grade stone aggregate to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested, for 150mm bore all as specified |
| 54 | M&L for PCC 1:3:6, type C-2 using 40mm grade stone aggregate to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested, for 200mm bore all as specified |
| 55 | M&L for reinforced concrete pipes 150mm bore, class NP2, laid and jointed complete with collars laid in trenches and jointed in CM 1:1 and tested as specified. |
| 56 | M&L for reinforced concrete pipes 200mm bore, class NP2, laid and jointed complete with collars laid in trenches and jointed in CM 1:1 and tested as specified. |
| 57 | Removing of sewage sludge from under ground sewage sump/septic tank and cleaning of any size and deep including cleaning of side walls, around removal of accumulated sludge, silt, mud etc, and covering the same with earth, recommissioning septic tank including site clearance around 3 metre depositing outside camp area all as directed Note: Removed sewage sludge to be taken out with proper machinery meant for the purpose with due care considering health hazards. |
| 58 | Bailing out water from septic tank of any size & deep and cleaning inlet and outlet sewer lines including taking out the sewage water and carting away it from the defence area all as directed. Note: Bailing sewage water to be taken out with proper tanker vehicle meant for the purpose with due care considering health hazards. |
| 59 | Cleaning of manholes by bailing out fluid and removing sediments, washing manhole floors and walls with wire brush taking out the excavated sludge, and carting away the same far away from buildings/ living area and deposit at low lying area/ditches and cover the same with fresh earth on top till preventing the unpleasant smell to the nearby users complete all as specified and as directed |
| 60 | Manhole depth not exec 1.00m |
| 61 | Manhole depth exec 1.00m |
| 62 | Cleaning the existing SGSW/CI/SWR/RCC sewage pipe line by rodding manually or mechanically and removing all sludge and foreign matters completely and neatly from the pipe line and making serviceable forfree flow of sewage in 100mm dia of pipe all as specified and directed |
| 63 | All as per item No.60 here in before but 150mm bore of pipe |
| 64 | All as per item No.60 here in before but 200mm bore of pipe |
| 65 | Cleaning and removing individual blockages in IWC/EWC by manually or mechanically and removing all sludge and foreign matters completely, neatly and making serviceable for free flow all as specified and directed |
| 66 | Cleaning and removing individual blockages from nahani trap/ floor trap/ gully traps in Bath rooms/Kitchen etc. by manuallyand removing all sludge and foreign matters completely, neatly and making serviceable for free flow and placing the covers/ gratings in position all as specified and directed |
| 67 | Pumping out rainwater from drains, low lying areas etc by mechanically and disposing the same out side the premises all as directed |
| 68 | Cleaning the PVC service water tanks by removing out water, cleaning floor, wall with wire brush and bleaching powder and removing mud, dusts, fungus and cleaning the floor and walls surface with fresh water complete for the capacity of tank up to 500 litres all as directed |
| 69 | All as per item No.66 here in before exe 500 but n.exc 1000 litres capacity |
| 70 | All as per item No 66 here in before exe 1000 litres but n.exc 2000 litres capacity. |
| 71 | Taking down chowkats with shutters (without taking off shutters from the frame) area exec 1.5 Sqm and n.exc 4 Sqm each and offered as credit. |
| 72 | All as per item No.69 here in before but n exec 1.5 Sqm each |
| 73 | Taking down shutters of any description area exec 1.00 Sqm and n exec 2 Sqm each. |
| 74 | Taking down shutters of any description area n.exc 1.00 Sqm each |
| 75 | Taking down shutters of any description area exec 2 Sqm each and refixing in same opening after necessary repairs |
| 76 | Taking down shutters of any description or type area exec 1.00 Sqm and n.exc 2 Sqm and refixing in same opening after necessary repairs |
| 77 | Taking down shutters of any description or type area n.exc 1.00 Sqm and refixing in same opening after necessary repairs |
| 78 | M&L for cutting holes in brick wall built in cement mortar or cement lime mortar and stone walls built in lime mortar exec half brick but not exec one brick all as specified Note:- Depth of embedded portion of holdfasts or lugs measured from face of jamb in to the wall |
| 79 | M&L for second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints |
| 80 | S&F for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ Cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: M.S hold fast/ lugs or SS dash fasteners shall be paid for separately. For WPC solid door/ window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile mentions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 81 | S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ Cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: M.S hold fast/ lugs or SS dash fasteners shall be paid for separately. For WPC solid door/ window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile mentions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 82 | M&L for providing and fixing factory made single extruded WPC (Wood Polymer composites) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/Cum and screw withdrawalstrength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engr- In- Charge. Note: stainless steel butt hinges and necessary S.S screws shall be paid separately |
| 83 | M&L for second class hard wood 35 mm flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides |
| 84 | M&L for second class hard wood 35 mm thick, glazed and skeleton shutters open rebated and prepared to receive glass or gauge etc divided into squares with plain chamfered or rounded and rebated sash bars any numbers. |
| 85 | M&L for second class hard wood 30mm thick, glazed and skeleton shutters open rebated and prepared to receive glass or gauge etc divided into squares with plain chamfered or rounded and rebated sash bars any numbers. In windows and ventilators are provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.24 (b) |
| 86 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with wooden beading or with nuts and bolts to existing steel Windows/ wooden windows |
| 87 | S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with wooden beading or with nuts and bolts to existing steel windows/wooden windows |
| 88 | S&F FI 25x3mm for hold fasts stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay),conforming to Fe 290 GDE E-165 |
| 89 | Preparing surface of wood & wood based materials, steel & iron work, new or old, of any description & girth, not otherwise described & treated with tar or coal tar black paint treating ends of posts, backs of chowkats, etc., area tarred exec 0.1 sq.m but n exec 0.5 sq.m. each |
| 90 | Preparing surface of wood & wood based materials, steel & iron work, new or old, of any description & girth, not otherwise described & treated with tar or coal tar black paint treating small articles such as stop, covers, gully gratings, holdfasts, ends of post, backs of chowkats, etc., area n exec 0.1 sq.m each |
| 91 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, design with 2mm thick Moulded prelam PVC Sheet on the front face & 2mm plain colour PVC sheet on back face supplying & fixing in opening including making good to the jambs as per specificationall as directed. Note: The quote rate shall be inclusive of following:- (i)Existing/new wall edges shall be finished properly in cement plaster in CM 1:4 including supply and fixing of 6 Nos wooden plugs for catch door frame size not exec 17 sqcm average sectional area and 100mm long. (ii)Frame shall be fixed to the wooden plugs inserted in wall using 6 Nos of 100mm long MS Screw, 3 each on either side |
| 92 | S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plaincolour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing. |
| 93 | S&F SS Butt hinges,100mm medium weightand fixed |
| 94 | S&F SS Butt hinges, 75mm medium weight and fixed |
| 95 | S&F extruded aluminium alloy handles,150mmfabricated type anodized |
| 96 | S&F extruded aluminium alloy handles,100mmfabricated type anodized |
| 97 | S&F Aluminium, 150mm anodized, barrel tower bolts extruded section & fixed |
| 98 | S&F Aluminium, 100mm anodized, barrel tower bolts extruded section & fixed |
| 99 | S&F Aluminium alloy, anodized, 250mm sliding door bolt with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing blots & sliding bolts of extruded section or cast aluminium alloy & fixed |
| 100 | S&F mild steel 300mm long ordinary rat tail rod pattern springs including roller and roller plate complete. |
| 101 | S&F 150mm Floor door stopper of aluminium alloy body & single legged with hard drawn steel spring, fixed in door shutters. |
| 102 | Hacking out broken glass any thickness, size, quality, from wooden frame/steel frames fixed with putty or with wooden beads. |
| 103 | S&F 4mm thick sheet glass, ordinary quality & glazing with oil putty in square n exec 0.5 sq.m in each pane |
| 104 | S&F in repairs Aluminium anodised tubular curtain rod 20mm dia with brackets. |
| 105 | S&F in repairs 18/19 MMthick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work. |
| 106 | M&L 6mm thick teak wood lipping for external of 18/19 thickness of board |
| 107 | S&F 30mm Continuous (piano) hinges, mild steel, bright finish or electro galvanised |
| 108 | S&F 100mm Hasp & staple, safety type, aluminium with mild steel hinges pin including bolt to hinges plate & fixed with screw |
| 109 | M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exec 10 cm girth |
| 110 | Supplying and laying of CPVC pipes SDR 11& plain CPVC SDR 11 fittings on walls/ceiling or laying in floors of outer dia 20mmm completeincluding taking down all as specified as specified |
| 111 | Supplying and laying of CPVC pipes SDR 11& plain CPVC SDR 11 fittings on walls/ceiling or laying in floors of outer dia 25mm completeincluding taking down all as specified asspecified |
| 112 | Supplying and laying of brass elbow of 20mm for CPVC pipe outer diameter of 16mm |
| 113 | Supplying and laying of brass Tee of 20mm for CPVC pipe outer diameter of 16mm |
| 114 | Supplying and laying of brass Tee of 25mm for CPVC pipe outer diameter of 16mm |
| 115 | M&L for taking up or down steel tubing and connections, including cleaning for refixing of GI water tubing of 15mm bore all as specified and directed |
| 116 | M&L for taking up or down steel tubing and connections, including cleaning for refixing of GI water tubing of 20mm bore all as specified and directed |
| 117 | S&F PVC connections 15mm size with PTMT nuts of length 450mm all as directed |
| 118 | S&F for grating doom 100mm dia of PTMT minimum weight 25 gms |
| 119 | S&F in repairs for 32mm dia PVC waste pipe 750 mm long for wash hand basin |
| 120 | S&F in repairs for 40mm dia PVC waste pipe 750 mm long for sink. |
| 121 | S&F in repairs vitreous China squatting pan ‘Orissa’ pattern, size 580 x 440 mm white, integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor . |
| 122 | S&F in repair Vitreous China wash down water closet (pedestal pattern), white (excluding flushing cistern and flush pipe) incl Pedestal pan and trap, connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe, seat cover etc, complete all as directed |
| 123 | S&F in repairs vitreous China wash basin, white, flat back, size 550x400mm incl 32mm waste fittings, brass, chromium plated for glazed ware basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixedincluding PVC waste pipe. |
| 124 | S&F in repairs 10 litres capacity PVC low level flushing cistern complete with ISI marked body and syphon |
| 125 | S&F in repairs 15mm fancy typebrass chromium plated angle cock with flange, screwed down, high pressure, with crutch handle, screwed both ends for iron pipe or for unions and fixed |
| 126 | S&F in repairs bib cock long body with flange, fancy type brasschromium plated, screwed down, screwed for iron pipe, 15 mm bore or for brass ferrule and fixed all as specified |
| 127 | S&F in repairs pillar cock,fancy typebrass chromium plated,screwed down, high pressure, with or without lettered ‘HOT’ or ‘COLD’ with long screwed shanks and fly nuts, screwed for 15 mm bore |
| 128 | S&F in repairsbrass CP wall mixer 15 mmborefor mixing hot & cold water screwed down for iron pipe & fixed with provn for connection to over head shower with bend pipe |
| 129 | S&F in repairs Bath room PVC cabinet mirror of size 350mm x 450mm |
| 130 | S&F in repairs bevelled edge mirror of size 600X450mm of selected quality glass mounted on 6mm thick AC building boards or on commercial plywood with aluminium beading around and fixed to wooden plugs with CP brass screws |
| 131 | S&F in repairs towel rail 600 mm long CP brass fixed with and including chromium plated brass screws and plastic cleats. |
| 132 | S&F in repairs brass chromium plated 125mm shower roses with or without swivel joints, any size, including fixing to steel pipe or union |
| 133 | S&F sinks with drainage board made of stainless steel 0.8mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460 mm bowl size 410 mm x 330 mm x 160 mm |
| 134 | Supply and fix Bib cock two way double Handle with flange, fancy type brass chromium plated, screwed down, screwed for iron pipe, 15mm bore for brass ferrule and fixed all as specified |
| 135 | S&F kitchen plate rack made out of stainless steel 0.8mm thick complete of size not less than 900x750x200mm, duly assembled and fixed to wall with wall screws / fasteners all as specified and directed. |
| 136 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 137 | S&F in repairs Plastic water closet seat, white, closed pattern with flat bottom, and cover and MS CP or aluminium hinging device. |
| 138 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises |
| 139 | M&L for non skid coloured ceramic tiles each tile area (sqr/rectangle) exec 0.06 Sqm but not exceeding 0.11Sqm tile thickness 7 to 8 mm, in floors etc set and joined in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed or bedding layer in CM 1:6 for floor finishing complete all as specified and as directed. |
| 140 | M&L for coloured vitrified ceramic tiles 10mm thick light shade (square/rectangular) polished, area of each tiles n exc 0.36 Sqm, in floors etc. set andjointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed or bedding layer in CM 1:6 for floor finishing complete all as specified and as directed. |
| 141 | Material and labour for ceramic coloured tiles, Non skid, area of each tile exec 0.18 Sqm and not exe 0.38Sqm (square / rectangle) 7 to 8mm thick mm thick, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed or bedding layer in CM 1:6 for floor finishing complete all as specified and as directed. |
| 142 | All as per item No.138 but in vertical surfaces dado/skirting using CM 1:3, 10mm thick backing coat. |
| 143 | All as per item No.139 but in vertical surfaces dado/skirting using CM 1:3, 10mm thick backing coat. |
| 144 | M&L for glazed coloured ceramic tiles in vertical surfaces 300 x 450 mm 7 to 8 mm thick set & jointed in neat cement slurry & pointed in white or coloured cement to match incl 10mm thick backing coat CM 1:3 dado/ skirting |
| 145 | Dismantling of existing roof treatment of any description completely and brushing the cleaned surfaces of concrete with neat cement slurry @ 3Kg of cement per sqm complete all as specified and as directed. Note:- All the debris from site shall be rubbish off the premises complete |
| 146 | M&L for PCC 1:2:4 type B-0 using 12.50mm graded stone aggregate over the roof slab25mm thick, finished even and fair without using extra cement all as specified and directed. |
| 147 | M&L for 10mm thick cement plaster in CM 1:3, mixed with water proofing compound over the levelling course while the concrete is green, finished even and smooth without using extra cement all as directed. Note:WPC shall be measured and paid separately. |
| 148 | Supply only water proofing compound |
| 149 | M&L for APP Modified prefabricated five layer water proofing membrane, not less than 3 mm thick and weighing not less than 3.80 kg/Sqmreinforced with non woven polyester matt black finished over compatible primer @ 0.3 Ltrs per Sqm, and a bonding bitumen of VG-10 at 1.20 kg/Sqm torching the membrane on whole surface uniformly while unrolling the membrane by LPG and sealed with trowel after necessary preparation of surface complete all as per manufactures instructions and finally finished with a coat of bit mastic aluminium paint @ 0.10 litre/Sqm over a coat of blown bitumen 85/25 grade @ 1.20Kg/Sqm over the membrane. The Overlap joint shall be provided of 75mm in longitudinal direction and 100mm in transverse direction respectively. All the angles, abutments and the drainage outlets shall be sealed with extra care to ensure full bondage including preparatory work. Note: The work shall be carried out by authorized applicators of manufacturers |
| 150 | S&F Powder coated aluminium frame for doors, sliding windows, ventilatorsandwith one or more rebates including joining cleat and handles and other necessary fittings for fixing etc. complete all as specified and directed. |
| 151 | S&F Powder coated Aluminium doors, window andventilators shutters, without sash bar, aluminium section weighting 0.55kg / m including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws etc complete all as specified and directed. |
| 152 | S&F in repairs 15mm fancy type chromium plated with long shank and cup concealed type angle cock with flange, screwed down, high pressure, with crutch handle, screwed both ends for iron pipe or for unions and fixed |
| 153 | S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in repairs |
| 154 | S&F Door closer hydraulically regulated (Aluminium extruded section body), designation No. 2 universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60kg and fixed |
| 155 | S&F rotational moulded polyethylene water storage tanks 500 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I incl 3 Nos of 25mm Nipple (minimum weight20mm-45gms) suitable for HDPE water tank., complete all as specified including dismantling old tank. |
| 156 | S&F rotational moulded polyethylene water storage tanks 1000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I incl 3 Nos of 25mm Nipple (minimum weight20mm-45gms) suitable for HDPE water tank., complete all as specified including dismantling old tank. |
| 157 | S&F in repairs 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe & fixed. (Minimum weight 20mm-210gms. |
| 158 | S&F in repairs 25 mm bore of Gun metal globe or gate, valves with iron screwed both ends for iron pipe and fixed |
| 159 | S&F in repair Vitreous China Urinal, Half stall type size (345x320x560) coloured/ white completefixing with suitable fixing arrangements to wall with and including domed waste coupling and waste pipe complete,all as directed. |
| 160 | Dismantling of wall and ceiling board (fibre, pulp, insulation etc)or insulation board including cover fillets |
| 161 | S&F Anodised aluminium snap grid Size of grid 605x605mm frame work for false ceiling incl Hangers 6mm dia. GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified |
| 162 | S&F 4mm thick non asbestos fibre cement building boards fixed or laid to Aluminium frame work with screws |
| 163 | M&L preparation of new surface of ceiling of any description and applying two coat of distemper oil emulsion ,white or tinted |
| 164 | S&F in repairs 6 feet pulley operated cloth drying system, aluminium anodised 22 mm dia pipes, channel assembly, locking system to hide rope knot, ropes 4 mm dia HDPE double core & fitting material etc. complete all as specified and directed. Make:- Easy dry or other equivalent make, sample as approved by GE. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
