Department Of Animal Husbandry-DOAH has published Tender For E-Procurement Notice For The Supply Of Shearing Machine And Clipper/Shearing Spares/Accessories For Shearing Machine.. Submission Date for this Tender is 13-10-2023. Cutting Crimping and Punching Tools Tenders in srinagar Jammu And Kashmir. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 05-Oct-2023 | EXTENSION | Date | 13-10-2023 |
Sl. No. | Item Description |
1 | Complete Shearing machine. • Single phase air cooled motor 220-240V, AC, 50Hz, Power – 280W to 700W • Motor should be compatible with QR or flexible drive and additionally provided with an in-built safety switch. • Motor weight: 10kg (+/-10%) • Motor should have 3 optional rotary speeds ranging from 2700 rpm to 3600 RPM • In built electronic safety motor • Flexible drive or Solid Drive with QR technology of minimum length 1m with either PIN or SPLINE attachment with motor compatible with the motor and hand piece. • Triple bearing hand piece easy grip with adequate internal oil lubrication points with low profile racing fork and prongs to reduce drag. • Hand piece should be compatible with medium and wide combs and cutters. • With pin or spline ending (worm drive) depending upon the type of the drive used • Noise emissions (LpAm): 70dB (A) • Working Height: Hang set so that end of the drive is 25mm (1”) above ground or working surface. • Flexible Drive setting: lower bayonet joint projection 20mm (3/4”) Warranty one year |
2 | Combs (13 teeth) Medium or wide combs compatible with hand pieces 80-90mm wide made up of durable high quality steel, full thickness and 3mm – 5mm blevel |
3 | Cutters Suitable for medium or wide combs Four teeth with full thickness of 4-5mm. Note: Combs and Cutters should be compatible with Hand pieces for portable shearing plant. |
4 | Emery Paper Emery paper of 60 grit/ 80 grit Both coarse and plain emery paper are required |
5 | ALUMINIUM DISC GRINDER: • Portable light weight vertical composite grinder should sharpen combs and cutters for use on mechanical shearing hand pieces. • Motor rated at 350W or above provided with an internal thermal overload switch. • Discs: Single disc to sharpen combs and cutters • Voltage: 220V, AC 50Hz, (single phase). • Weight: Less than 25kg • Speed: 1200 to 2400 RPM • Provided with handles for proper lifting and should have adjustable pendulum. • With durable carry case for the grinder and another small carry case for pendulum. Warranty One Year. |
6 | Hand Piece |
7 | Flexible shaft tube |
8 | Copydexglu |
9 | Tension lock ring |
10 | Spring gutcore |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail