Sports Authority Of Jharkhand has published Tender For Renovation Work Of High Mast Light Camera Tower Dugout Score Board D.G Set And Led Screen At Hockey Stadium Morabadi Ranchi. Submission Date for this Tender is 23-09-2023. Diesel Generators Tenders in ranchi Jharkhand. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | High Mast Flood Light |
| 2 | Examination of existing Electric power cableandreplacement where necessary completed as directed along withcarefully dismantling existing Metal Halide fixtures including Drivers from their existing location& submitting them to client |
| 3 | Supplying, fitting, fixing of LED lights and as per bidder"s design |
| 4 | RepairingofInternal electrical wiring inside the High Mast if required along with Modification of existing wiring inside the racks to suit the driver of LED floodlights offered.This includes Supply of 4cx2.5 sq.mm. XLPE insulated unarmoured copper cable as required for energsing the LED flood light. |
| 5 | Flood Light Aiming of LED flood light as per the Design and specification at site with necessary guidance and Hand over the System with all the necessary details & documents including measurement of the Lighting Lux level at site as per the Design and specification |
| 6 | OperationAnd Maintenace charges |
| 7 | Annual Maintenance of the Entire Flood lighting system (The bidder shall carryout a bi-annual checks and cleaning of the complete system and submit report to authority. The lights shall be operated to check for 100% performance.) |
| 8 | Buy Back |
| 9 | Buy back of Convetional fixture with accessories of individual mast. |
| 10 | Camera Tower |
| 11 | Earthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item - A0 and disposal of excavated earth as obtained to a distance upto 50M including all lifts levelling, ramming the foundation trenches, removing roots of trees, shurbs all complete as per approved design, building specification and direction of E/I. |
| 12 | Extra for earthwork in hard soil as per specification and direction of E/I. ( vide classification of soil item-B) |
| 13 | Earth filling infoundaion trenches and plinth in layers not exceding 150 mm thick well watered, rammed, fully compacted and fine dressed with earthobtainedfrom excavation offoundation trenches within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I.(mode of measurement compacted volume) 60% of te total excavated qty |
| 14 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size) |
| 15 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) |
| 16 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete |
| 17 | Providing Toe steel reinforcement of 8mm dia rods as approved design and drawing excluding carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (Only Valid for SAIL & TATA STeel) |
| 18 | 8 mm |
| 19 | 12 mm to 25mm |
| 20 | Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 21 | Providing 1.5mm cement punning including curing, carriage of water with all leads and lift as per building specification and direction of E/I. |
| 22 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 23 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 24 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-incharge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 25 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Gutter (600 mm over all girth) |
| 26 | Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I. |
| 27 | Carriage of Material |
| 28 | Sand - 15 km |
| 29 | Metal - 22 km |
| 30 | Dugout and Tech Table |
| 31 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes |
| 32 | Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I. |
| 33 | Chair for Dugout |
| 34 | Score Board |
| 35 | Supply of Outdoor P 10 LED Display Board Display Muddle Size 320mm x 160mm. (Specification- (1) LED Colour- RED, (2) Voltage -5v, (3) Power-25w, (4) Pixel Pitch - 10 mm, (5) Interface (a) Wifi, (6) LED Lifetime >=10000 hrs, (7) Module Size 320x160x25mm, (8) Pixel Density n - 10000, (9) Brightness>=5500, (10)Module weight <400gm, (11) Horizontal viewing Angle 120 (Degree), (12) Humidity 0-90%, (13) Best View Distancing 10-40 M, (14) Input Power Frequency 50/60 Hz, (15) Warranty - Min one year & (16) Cabinet mad of min- ACP Sheet. |
| 36 | Installation & Commissioning Ms Structure, welding work, ACP work + Cable Laying and installation + Manpower (in Site) |
| 37 | LED Screen |
| 38 | P6 SMD Outdoor LED Screen (Beand VDT) |
| 39 | 1 unit of 6 SMD outdoor LED screen having dimension of 33"4" x 25"2" Sq ft |
| 40 | LED Processor |
| 41 | LED Processor Input - HDMI x 1, DVI x 1 & VGA x 1 |
| 42 | Installation & Commissioning |
| 43 | Installation + manpower as per site requirement |
| 44 | Scribibg Work, Primer Paint & Painting Work |
| 45 | Aluminum Composite Panel ACP Sheet 3.5 mm thickness |
| 46 | Main Electrical Panel & Supply Panel |
| 47 | 125 Supply, Installation, Testing and Commissioning of cubica 1 type power with three nos of LED type (RYB) indicating lamp, 1 nos of Ammeter, 1 nos of Voltmeter with selector |
| 48 | Supplying and laying Data Cable site to site |
| 49 | Supplying and laying Outgoing Cable |
| 50 | Supplying & Laying at site of following size PVC insulated XLPE power cable of 1.1 KV grades of cupper categories relevant as required (3x4 sq mm) |
| 51 | DG Set |
| 52 | Silent type D.G Set of capacity 500 KVA With AMF Panel IS/IEC-60034-1 IS: 1460 IS: 13018 |
| 53 | Oil (Fuel) Filter for 500 KVA DG set |
| 54 | Mobil Filter for 500 KVA DG set |
| 55 | Air (inner + outer) Filter for 500 KVA DG set |
| 56 | SMPS 24V Battery charger for DG se |
| 57 | Add GST on Estimated Amount @ 18% |
| 58 | Add Labourcess @ 1% |
| 59 | Grand Total |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
