Military Engineer Services-MES has published Tender For Addition/Alteration To Static Tanks In Magazine Area Of Nad Alwaye And Special Repairs To Addressable Fire Alarm System At Naval Air Enclave Nedumbassery.. Submission Date for this Tender is 19-10-2023. Water Tank Tenders in Ernakulam Kerala. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 26-Sep-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 03-10-2023 |
| 2 | 03-Oct-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 09-10-2023 |
| 3 | 07-Oct-2023 | Date Corrigendum | Date | 16-10-2023 |
| 4 | 10-Oct-2023 | Corrigendum Amendment | Other | 16-10-2023 |
| 5 | 16-Oct-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 19-10-2023 |
| Sl. No. | Item Description |
| 1 | Supply & Fix Mild Steel in tubular trusses including special shaped washer etc, complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St -240 with applying one coat of Red Oxide primer complete all as specified and as directed. |
| 2 | Supply & Fix Fe 410-W(Grade E-250) quality-A Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes with riveted, bolted or welded attachment with riveted, bolted or welded attachment applying one coat of Red Oxide primer complete all as specified and as directed. |
| 3 | Supply & Fix Aluminum wire mesh of 20mm aperture and thickness of wire 4mm including all necessary fitting complete all as specified and directed by Engineer in Charge |
| 4 | Supply & Fix Mild steel rag or lewis bolts of 12mm dia , screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised, exceeding 15cm but not exceeding 30cm long complete all as specified and as directed |
| 5 | Supply & Fix Anodised aluminium frame for doors Powder coated, windows, ventilators with one or more rebates including joining cleat for fixing etc, complete all as specified |
| 6 | Supply & Fix anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no ) hinges type B-21 100mm long (2no.) suitable handle (01 no.) complete all as specified complete all as specified and as directed. |
| 7 | Supply & Fix rolled mild steel Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc confirming to Grade Fe 410-W (Grade-E-250), (cut to ordinary lengths i.e. within 20mm of the length indicated) with applying one coat of Red oxide primer complete all as specified and as directed. |
| 8 | Supply & Fix Mild Steel Hand rails, half round or other stock section or core for wooden hand rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Grade E-165 with applying one coat of Red oxide primer for bracing aluminum mesh to lower skeleton complete all as specified and as directed |
| 9 | Material & Labour for preparing new surface of steel and iron of any description over 10cm in width of girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified |
| 10 | Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 11 | Material & Labour for P.C.C 1:2:4 type B-2 using 40 mm graded stone aggregate as infoundation filling and mass concrete including all formwork complete all as specified and as directed |
| 12 | Supply & Fix 2mm dia galvanised steel chicken wire mesh complete all as specified and as directed |
| 13 | Material & Labour for plain Cement concrete 25mm thick type B-0, 1:2.4 (12.5mm graded aggregate) including all formwork complete all as specified and as directed |
| 14 | Material & Labour for rendering 15 mm thick in cement mortar 1:4, on other than fair faces of brick work or concrete surfaces, finished even fair without using extra cement complete all as specified |
| 15 | Supply only Liquid water proofing compound. |
| 16 | Material & Labour for RCC M-30 (Design Mix) as in Foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc complete all as specified and directed. |
| 17 | Material & Labour for TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 18 | Material & Labour for TMT bar 5mm dia and over up to and including 10mm dia in stirrups, spacers and binders complete all as specified and directed. |
| 19 | Material & Labour for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; in curved portion similar work complete all as specified and directed. |
| 20 | Material & Labour for preparation of new surfaces of wall and applying three coats of white wash complete all as specified and directed. |
| 21 | General Servicing, cleaningand checking of Addressable single unit type detectors have a combination of both heat and smoke type detection complete all as directed by Engineer in charge |
| 22 | General Servicing, cleaning and checking of conventional type heat detectors complete all as directed by Engineer in charge |
| 23 | General Servicing, cleaning and checking of addressable module for conventional heat detectors complete all as directed by Engineer in charge. |
| 24 | General Servicing, cleaning and checking of manual push button to initiate audio alarm resettable, intelligent and addressable (Inside office Building) complete all as directed by Engineer in charge. |
| 25 | General Servicing, cleaning and checking of manual push button to initiate audio alarm resettable, intelligent and addressable type enclosed in a flame proof, weather proof enclosure (Inside Hangar) complete all as directed by Engineer in charge. |
| 26 | General Servicing, cleaning and checking ofaddressable type fire alarm hooter cum strobe complete all as directed by Engineer in charge. |
| 27 | Retrieving of Password from OEM and updating software for Main Addressable fire alarm control Panel including reprogramming complete all as directed by Engineer in charge. |
| 28 | General Servicing, cleaningand checkingfault clearing and reprogramming of existing Addressable microprocessor based two loop fire alarm/ detection control panel complete all as directed by Engineer in charge. |
| 29 | General Servicing, cleaning and checking of intelligent active repeater panel complete all as directed by Engineer in charge. |
| 30 | Supply, Install Testing & Commissioning of analogue addressable fault isolator modules including all accessories like junction boxes, glands, terminating legs complete as required and as per specification and NFPA72E compliance RE-717 MI complete all as directed by Engineer in charge. |
| 31 | General Servicing, cleaning and checking of response indicator for addressable detectors which are placed in above ceiling area complete all as directed by Engineer in charge. |
| 32 | Servicing of UV IR flame detector with Ex- proof enclosure, flickering LED indication for normal operation, 24 Volt DC, 4 wire system, 2 for input supply and 2 wire suitable to connect for addressable fire alarm panel complete all as directed by Engineer in charge. |
| 33 | Supply, Install Testing & Commissioning of UV IR flame detector with Ex-proof enclosure, flickering LED indication for normal operation, 24 Volt DC, 4 wire system, 2 for input supply and 2 wire suitable to connect for addressable fire alarm panel complete all as directed by Engineer in charge. |
| 34 | Supply, Install Testing & Commissioning of addressable module for UVIR detector RE 717 M2 analogue addressable zone interface module complete all as directed by Engineer in charge. |
| 35 | Supply, Install Testing & Commissioning of addressable of addressable smoke detector RE 317 DSC analogue addressable smoke detector UL listed complete all as directed by Engineer in charge. |
| 36 | Servicing and testingof High intensity electronic Siren complete all as directed by Engineer in charge. |
| 37 | Supply & Fix FRLS cable Loop testing fault clearing checking and servicing complete all as directed by Engineer in charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
