Military Engineer Services-MES has published Tender For Additional/Alternator To Building No P-344 Of Age Office At Mil Station Agartala. Submission Date for this Tender is 09-10-2023. Mobile Generator Tenders in agartala Tripura. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 02-Oct-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 09-10-2023 |
| Sl. No. | Item Description |
| 1 | Schedule"A" Part-I: B&R works |
| 2 | Dismantling of AC sheet corrugated / CGI corrugated sheets in roofing any gauge and any thickness including ridge, valley/gutter etc. |
| 3 | S & F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength 550 Mpa as in roof covering/cladding/ eaves board fixed with selp tapping screw complete all as specified and directed. |
| 4 | S & F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength 550 Mpa as in roof covering/cladding/eaves board fixed with selp tapping screw complete all as specified and directed. |
| 5 | Dismantling wrought iron or mild steel work of any description not otherwise provided for. |
| 6 | S&F Rolled Steel Sections as intrusses,rafters etc including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St -240complete all as specified and directed. |
| 7 | S&F MS steelHollow section Square/rectangular as in purlins, rail etcetc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St -240complete all as specified and directed. |
| 8 | S & F Mild steel work in hand rails, half round or other stock section or core for wooden hand rail straight portion, drilled and counter sunk for balusters, nosing to steps including embedding in concrete and screwing etc., wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shapes as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc., and similar work confirming to Fe 290 Gde E-165. |
| 9 | M&L of two coat of synthetic enamel paint over one coat of red oxide primer on new steel surfaces of any description over 10cm in width or girthincl preparation of surfaces complete all as specified and as directed. |
| 10 | M&L of one coat of synthetic enamel paint on old steel surfaces of any description over 10cm in width or girthincl preparation of surfaces complete all as specified and as directed. |
| 11 | Dismantling wall / ceiling board (fibre pulp insulation) or insulation boards any thickness including cover fillets |
| 12 | S & F Aluminium anodised snap grid frame work for false ceiling of grid size 605 x 605 mm with Aluminium "T" section of size 38 x 25 x 1.50 mm thick for main runners, 25 x 25 x 1.5 mm thick for cross runners and angle of size 25 x 25 x 1.50 mm thick along the walls suspended withHangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, including Non asbestos fibre cement building board( E Board) 4 mm thickfor fixed to Aluminium frame work with screws as in ceiling applying twocoats of oil emulsion distempering including new surfaces of ceiling complete all as specified all as specified. |
| 13 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 14 | Material and labour 75 mm thick PCC 1:3:6 type C2 using 40 mm graded aggregate as in plinth protection finished fair and even w/o using extra cement and making groove of 10mm width at every 3m intervals and at diagonals and filling the joints with bitumen mastic( a mix of bitumen and sand in 1:1 by weight) complete all as specified . |
| 15 | Demolition of brick work built in cement mortar. |
| 16 | M & L Brickwork with old size subclass `B" bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) |
| 17 | Taking down plaster on brick or stone wall, ceiling etc incl racking out joints hacking for keys scrubbing down with water etc complete all as specified and directed.etc. |
| 18 | M & L 10 mm thick rendering on fair faces of brick work or concrete surface in cm 1:6 to be finished fair and even with out suing extra cement. |
| 19 | M&L for 15 mm thick cement plaster in cement mortar 1:4 as on chajjas, beam, balcony fins etc with hard drawn wire fabric mesh where required to make up to original shape at any height complete all as specified and directed |
| 20 | M& L for 3mm thick Wall care putty on wall Surface incl preparation of new surface compete all as specified and as directed |
| 21 | M& L for 3mm thick Wall care putty on wall Surface incl complete removal of existing treatment and preparation of old surface compete all as specified and as directed |
| 22 | M & L two coat ofOil bound distemper over a coat of primer complete all as specified and as directed |
| 23 | M & L Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) and preparation of new plastered surface complete all as speified. |
| 24 | M & L for compete removal of existing surface andFinishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) incl preparation of old surface complete all as speified. |
| 25 | Applying two coats of synthetic enamel paint on steel & iron surfaces of any description, n exc 10cm width or girth when unconnected with other painting or when painted in different tint, including preparation of new surface & applying one coat of red oxide, zinc chrome |
| 26 | Dismantling timber boarding of any description fixed in any position complete all as specified. |
| 27 | S&F 2nd class Hard wood 20 mm thick boarding planed both side with butt joints fixed with nails in any situation complete all as specified and as directed |
| 28 | M&L for two coats of synthetic enamel paint over one coat of pink primer on wooden surfaces of any description, not otherwise described, over 10cm width or girth incl preparation of new surfaces complete as specified and directed. |
| 29 | Taking down chowkat with shutter/without taking off shutter from the frame exe 1.50 Sqm but n.exc 4.00 Sqm each complete all as specified and directed. |
| 30 | S&F Powder coatedanodised aluminiumdoor air tight frame made of size 100 mm x45 mm of sheet thickness1.5 mm with one or more rebate including joining cleat etc for fixing anodised aluminium door shutterfully panelled (two nos of panel each shutter) with 5.5 mm thicktinted glass shutter ,rail made 80mm x45 mm of sheet thickness 1.5 mm (top ,bottom ,middle and side rail) single /double leaf side hung type including nessary jointing cleat ,anodised aluminium fillet ,aluminium glazing clip with rubber gasket with aluminium fitting such as aluminium butt hinges 100 mm long 3 Nos on each shutter , aluminium anodised handle 150 mm ,2 nos D type for each shutter and locking 6 lever Make : harrison one on each door,All door fitting except cleat shall be ISI Marked |
| 31 | S & fixed in repairaluminium extruded section body Door closer hydralically regulated,designation No. 3,universal type, suitablebfor door shutters of 851 to 1000 mm in widthand of weight between 61 to 80 kg and fixed |
| 32 | S&F in repair fancy type CP curtain rod 25 mm dia incl side knobs and brackets complete as in repairs complete all as specified. |
| 33 | Dismantling floor, hearth or wall tiling including cement mortar bedding,(but not backing) removing serviceable tiles to store and rubbish off the premises. |
| 34 | M&Lfor light shade vitrified ceramic tiles 10mm thick ( Square/Rectangular ) polished, area of each tiles not exceeding 0.36 Sqm in Floors etc setand jointed in neat cement slurry and pointed in white or coloured cement to match and over cement screed bed 15mm thick in cement mortar CM1:4 all as specified and directed. |
| 35 | M&Lfor light shade vitrified ceramic tiles 10mm thick ( Square/Rectangular ) polished, area of each tiles not exceeding 0.36 Sqm in skirting etc setand jointed in neat cement slurry and pointed in white or coloured cement to match and over a 10mm back coat plastering cement mortar 1:4all as specified and directed. |
| 36 | M&L 25 thick P.C.C (1:2:4) type B-O using 12.50 mm graded stone aggregate as in floor finished rough. |
| 37 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 38 | Material and labour 75 mm thick PCC 1:3:6 type C2 using 40 mm graded aggregate as in plinth protection finished fair and even w/o using extra cement and making groove of 10mm width at every 3m intervals and at diagonals and filling the joints with bitumen mastic( a mix of bitumen and sand in 1:1 by weight) complete all as specified . |
| 39 | Schedule"A" Part-I: E&M works |
| 40 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc |
| 41 | M & L Point wiring with PVC insulated and unsheathed multistranded FRLSH copper conductor single core 1.5 Sqmm (nominalarea) cable using approved colour code as per IS drawing in and incl PVC casing and capping (ISI Mark) with all accessories including providing sunk cast pressed steel terminal boxes off size made out of 1.5mm thick MS sheet duly painted with black bitumen paint over a coat of red oxide primer and providing 3 mm thick plastic laminated bakelite sheet(HYLUM BRAND) top cover alongwith copper earth wire PVC insulated & unsheathed multistranded(FRLSH) copper conductor cableof size 1.5 Sqmm as continous earth wire connected to common earth and earth dolly complete all as specified |
| 42 | One light/Fan/Bell point controlled by one way switch 5 Amp. |
| 43 | One 3 pin 5 Amp socket out let controlled by one switch on same board. |
| 44 | One 3 pin 5 Amp socket out let controlled by one switch on independent board. |
| 45 | M & L Point wiring concealed type for Power point controlled by one 15 Amp switch with PVC insulated and unsheathed multistranded FRLSH copper conductor single core 2.5 Sqmm (nominalarea) cable using approved colour code as per IS drawing in and incl PVC casing and capping (ISI Mark) with all accessories including providing sunk cast pressed steel terminal boxes off size made out of 2.5mm thick MS sheet duly painted with black bitumen paint over a coat of red oxide primer and providing 3 mm thick plastic laminated bakelite sheet(HYLUM BRAND) top cover alongwith copper earth wire PVC insulated & unsheathed multistranded(FRLSH) copper conductor cableof size 2.5Sqmm as continous earth wire connected to common earth and earth dolly complete all as specified |
| 46 | Supply and fix modular switch piano flush type (ISI) marked, single pole, one way 5/6 Amp, 240 Volts complete all as specified and directed. |
| 47 | Supply and fix modular switch piano flush type (ISI) marked, single pole, one way 15 Amp, 240 Volts complete all as specified and directed. |
| 48 | Supply and fix modular socket outlet 2 in 1, 3 pin,6 Amp piano complete all as specified & directed. |
| 49 | Supply and fix modular socket outlet 2 in 1, 3 pin, 6/16 Amp piano complete all as specified & directed. |
| 50 | Supply and fixing ceiling rose , surface backelite, 65 mm z 50 mm, two to three terminals complete all as specified and directed. |
| 51 | Supply and fixing modular stepped type electronic fan regulator flush type AC 220 V on the existing phenolic laminated modular sheet etc. as reqd complete all as specified and directe. |
| 52 | Supply and fixing round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete |
| 53 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with dirver, holders & LED lam suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. |
| 54 | Hanging only ceiling fan (M.D. Supply) and connecting up including provision of cable from ceiling rose or connector to fan. |
| 55 | NOTES :- 1.The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. 2.Unless otherwise specified the rates for PCC shall deemed to include the cost of formwork shuttering etc, required for complete and proper execution of the work. Refer Schedule "A" notes for details. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
