Tender For Renovation/ Strengthening Of Pst No. 1 (Primary Settling Plant) With Allied Works At 16 Mgd Stp Okhla.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
18 Sep 2023
0 days left
EMD
25600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
okhla → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Renovation / Strengthening Of Pst No. 1 ( Primary Settling Plant ) With Allied Works At 16 Mgd Stp Okhla.
BOQ
| Sl. No. | Item Description |
| 1 | Renovation of Primary SettlingNo. 1 having capacity 8 MGD at 16 MGD, STP, Okhla by carrying out the following works:-All the required works , materials, arrangements , tools & tackles , workmanship ,safety equipments ( safety belt ,body harness ,gumboot, gas face mask, helmet etc.) as per NHRC\NGT\ DPCC etc guidelinesand as per site requirement , remodeling all the damages up to standard if occurred any complete in all respect as per requirement satisfactorily job engineer- in - charge. |
| 2 | Dewatering the stagnant water and cleaning the PST with the help of submersible pumps and D.G. sets De-Sludging and cleaning the P.S.T. manually for execution the work. |
| 3 | Taking out motor after mechanical dismantling of sprocket chain. Removing of gear box from the base and shifting equipments in safe place. Dismantling of central primary gear drive unit after disconnection from main electric supply. |
| 4 | As per site requirement Making temporary plate form as safety measures on the sides of the central cage of drive head. |
| 5 | Dismantling of internal gear heavy unit of turn table, other gears and pinion, dismantling of bearing. Taking out vertical shaft. This includes lifting arrangement by mechanical means Dismantling of main gear driving unit after cutting rusted fasteners by gas welding set.. |
| 6 | Dissembling of primary Reduction Gear Box. |
| 7 | Supply of worm Gear, Pinion, Bushes, Fabricated as per sample standard in respect of size, finishing as per sample. |
| 8 | Providing of sprocket chain & wheel, as per sample. |
| 9 | Refitting of primary reduction gear box after resembling the all above parts and alignment with motor. Fixing of sprocket chain, filling of oil. The work includes servicing of starter, motor as per site requirement. |
| 10 | Supply of central gear, pinion and set of bushes fabricated as per sample in respect of size, finishing as per sample for main Gear Driving Unit. |
| 11 | Providing of turn table rolling balls of existing size. |
| 12 | Providing of Lubricating oil 320. Make: - Servo. |
| 13 | Fixing of Turn Table rolling Ball along with strip Liner, re-assembling & fixing of main gear driving unit complete mechanism like gear, Pinion, bearings, i/c fixing of oil seals, gaskets and filling of lubricating oil etc. |
| 14 | Fabrication/fixing of sitting arrangement near reduction gear box for safety purpose with M.s angle 40x40x6 mm length approx 10 meter and M.S sheet of 5 mm approx 5 meter and M.S pipe 40mm dia. Approx 12 meter for safety arrangement. |
| 15 | Dismantling of rusted/corroded bottom scrappers along with arms with the help of Gas Cutter, all tools & tackles. |
| 16 | Providing of M.S. Angle Iron of sizes 90mm x 90mm x 10mm and in a length of 7’ fit for scrappers Arms. |
| 17 | Fab./Providing of Bottom Scrappers of sizes appx. 2700 x 200 x 8 mm along with Rubber Squeezers & M.S. Flat. |
| 18 | Providing of M.S Nut Bolts of different sizes |
| 19 | Providing the 4 Nos. tie rod with support on both side of central drum for holding & balancing the scrappers arms with adjustment assembly |
| 20 | Labour charges for fixing the above M.S Angle Iron for scrapper Arms, Bottom scrappers along with squeezers i/c making hole for tightening of Nut Bolts i/c all welding & cutting work. |
| 21 | Dismantling of worn out V-notch of rusted not bolts with the help of gas cutter, all tools & tackles.. |
| 22 | Providing the S.S nut bolts as per sample for fixing the ‘V’ notch. |
| 23 | Fixing the V-notch in PST after drilling in RCC with power hammer including all civil work with all tools and tackles. |
| 24 | Cutting of worn out/ corroded M.S. sheet of walkway with the help of gas cutter, all tools & tackle. |
| 25 | Providing the M.S. channel of 125X 65 mm approx 25 meter and M.S Angle 65X65X6 mm approx 25 meter |
| 26 | Providing of M.S chequered sheet 1 meter wide having 8 mm thick |
| 27 | Fixing of above M.S. chequered sheet with M.S Channel and M.S angle on the walkway bridge by cutting welding with required size. |
| 28 | Providing of Red oxide metal primer in 20 kg packing. Make: - Asian/Nerolec/Burger. |
| 29 | Providing of synthetic Enamel paint in Black/Red Colour in 20 Ltrs. Make: - Asian/Nerolec/Burger |
| 30 | Painting of the complete structure after removing of rust with brush with one coat of primer & two coat of enamel paint i/c petty items. |
| 31 | Testing and commissioning the complete FST after completion in all respect on no load / full load. |
AI Tender Summary
Tender Timeline
Sep 11, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedSep 18, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 18, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender