|
| 1 | SCHEDULE \"A\" PART - I [B/R WORKS] |
| 2 | Surface Excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil. |
| 3 | Excavation Over Areas, not exc. 1.50 Metre in depth and getting out in Soft /Loose Soil, complete all as specified and as directed. |
| 4 | Excavation Over Areas, exc. 1.50 Metre but not exc. 3.00 Metre in depth and getting out in Soft /Loose Soil, complete all as specified and as directed. |
| 5 | Excavation in Trenches not exc. 1.50 Metre Wide and not exc. 1.50 Metre in Depth for Foundation etc. or for Shafts, Wells, Cess Pits, Manholes, Pier Holes, etc. not exc. 10 Sqm on Plan and not exc. 1.50 Metre in depth and getting out as in Soft/ Loose Soil, complete all as specified and as directed. |
| 6 | Excavating in Post Holes (or Similar Holes) in Soft/Loose Soil, each not exc. 0.50 CUM, getting out and removing surplus Soil to a distance not exc. 50.00 Metre and Making Good Surfaces, complete all as specified and as directed. |
| 7 | Returning, Filling in including Spreading, Levelling, Watering and Well Ramming in layers not exc. 25 Cm, in Soft/Loose Soil, complete all as specified and as directed. |
| 8 | Labour for Spreading and Levelling of soil otained from Excavation in layer n.exc. 25 cm thick including Well Ramming and watering as reuired complete all as specified and as directed. |
| 9 | Removing Excavated Materials (Soils), exc. 50.00 Metre and depositing where directed at a level not exc. 1.50 Metre above the Starting Point, complete all as specified and as directed. |
| 10 | M&L Gravel filling in floor/pavings, Deposited, Spread and Levelled in Layers not exc. 15 Cm thick, Watered and Well Rammed to a True Surface, complete all as specified and as directed. |
| 11 | M&L Hardcore Broken Stone or Boulders, Gauge not exc. 63mm, Deposited, Spread and Levelled in Layers not exc. 15 Cm thick, Watered and Well Rammed to a True Surface, complete all as specified and as directed. |
| 12 | M&L Loose filling with Aggregates of Gauge 80mm to 150mm in Soakage Pits, Soakage Wells with Broken Bricks, complete all as specified and as directed. |
| 13 | M&L Cement Concrete 1:2:4 (20mm graded stone aggregate) in Coping, Bed Plates, Benching, Bed Block, Kerb Stones, etc. including necessary Formwork and Weathering, slightly Rounded or Chamfered Angles and Throating including necessary Formwork, complete all as specified and as directed.NOTE : Cost of Formwork will deemed to be included in the Quoted Unit Rate. |
| 14 | M&L Cement Concrete 1:3:6 (40mm graded stone aggregate) in Foundation, Filling and Mass Concrete, etc. for Columns, Pillars, Posts & Struts, Manholes, etc. including all necessary Formwork, complete all as specified and as directed.NOTE : Cost of Formwork will deem to include in the Quoted Unit Rate. |
| 15 | M&L Cement Concrete 1:4:8 (40mm graded stone aggregate) in Foundation, Filling and Mass Concrete, etc. including necessary Formwork, complete all as specified and as directed.NOTE : Cost of Formwork will deem to be included in the Quoted Unit Rate. |
| 16 | M&L Reinforced Cement Concrete 1:2:4 (20mm graded stone aggregate) in Foundation including Raft, Footing, Foundation Beam for Column Basement Slab, under reamed Piles, complete all as specified and as directed.NOTE : Reinforcement & Formwork will be Measured and Paid for separately under appropriate Items. |
| 17 | M&L Reinforced Cement Concrete (20mm graded stone aggregate) Columns, Pillars, Piers, Posts and Struts, etc., complete all as specified and as directed.NOTE : Reinforcement & Formwork will be Measured and Paid for separately under appropriate Items. |
| 18 | M&L Reinforced Cement Concrete 1:2:4 (20mm graded stone aggregates) in Beams, Cantilevers, Bressummers, Lintels Over 1.50 Metre Span and the like, complete all as specified and as directed.NOTE : Reinforcement & Formwork will be Measured & Paid for separately under appropriate Items. |
| 19 | M&L Reinforced Cement Concrete 1:2:4 (20mm graded stone aggregate) in Slabs supported on Walls, Beams and Columns; in Floors, Roofs, Landings Balconies, Canopies, Deck Slabs and in Shelves and the like, complete all as specified and as directed.NOTE : Reinforcement & Formwork will be Measured and Paid for separately under appropriate Items. |
| 20 | M&L Reinforced Cement Concrete 1:2:4 (20mm graded stone aggregates) in Chajjas and the like, complete all as specified and as directed.NOTE : Reinforcement & Formwork will be Measured & Paid for separately under appropriate Items. |
| 21 | M&L Pre-cast Reinforced Cement Concrete 1:2:4 (20mm graded aggregate) in Landings, Cover Slabs (for Manholes, etc.), Chullah Hoods, Chajjas, Water Troughs, Mangers, Shelves and Similar Articles with Plain faces and setting in Cement Morter 1:4, complete all as specified and as directed.NOTE : Reinforcement will be Measured and Paid for separately under appro-priate Items. |
| 22 | M&L Formwork to Sides of Concrete Foundations, Footings, Bases of Columns, Raft and Raft Beams, Sides and Soffits (if any) of Foundation and Plinth Beams; and Similar Work; Vertical or to Batter, Flat, Rough Finished surfaces of Concrete, complete all as specified and as directed. |
| 23 | M&L Formwork to Sides Pillars, Posts, Struts, Piers, Columns and Stanchions and Similar Work; Rough Finished surfaces of Concrete, complete all as specified and as directed. |
| 24 | M&L Formwork to Sides and Soffits of Floor or Roof Beams, Girders, Beam Haunch-ings, Bress-summers, Lintels, Cantilevers, Shelves including Supports, Overhangs, etc. also splays between Floors and Beams, etc., Flat, Rough Finished Surfaces of Concrete, complete all as specified and as directed. |
| 25 | M&L Formwork to Soffits of Suspended Slabs such as Roof Slabs, Floor Slabs, Landings and Similar Works; not exc. 200mm thick (Horizontal or Sloping), etc., Rough Finished surfaces of Concrete, complete all as specified and as directed. |
| 26 | M&L Formwork to Soffits of Chullah Hoods, Chajjas, Troughs and Similar Items including Edge, Rough Finished Surfaces of Concrete Flat, complete all as specified and as directed. |
| 27 | M&L Machine Made & Pressed Pre-cast Cement Concrete Block Masonry with Solid Blocks 300x200x200mm or 300x200x100mm in Sizes, having Compressive Strength of not less than 100 Kg/ Sq Cm (as per IS-2185) in Cement Concrete 1:3:6 (20mm graded stone aggregate), exc. 10 Cm in width and setting in Cement Mortar 1:6, complete all as specified and as directed. |
| 28 | M&L Machine Made & Pressed Pre-cast Cement Concrete Block in Honey Comb Walling with Solid Blocks 300x200x200mm or 300x200x100mm in Sizes, having Compressive Strength of not less than 100 Kg/ Sq Cm (as per IS-2185) in Cement Concrete 1:3:6 (20mm graded stone aggregate), exc. 10 Cm in width and setting in Cement Mortar 1:4, complete all as specified and as directed. |
| 29 | M&L Cement Concrete 1:2:4 (12.5mm graded stone aggregate) 40mm thick in Damp Proof Courses to Horizontal or Vertical Surfaces including Use & Waste of Formwork and Applying Evenly a coat of Blown type Bitumen @ 1.50 KG/SQM and blinding with Clean Dry Sand @ 0.05 CUM/SQM, complete all as specified and as directed. |
| 30 | S&F Solid PVC Door Frame of size 50x47mm made out of 5.0mm thick plain colour PVC Sheet reinforced with Mild Steel Square Tube and fixing in Opening as per Specification and Drawing of MES Schedule, complete all as specified and as directed. |
| 31 | S&F Factory Made Solid Panel PVC Door Shutter 30mm thick (Style) consisting of Frame made out of Mild Steel Tubes for Top & Bottom Rails, Mild Steel Frame shall be covered with Heat Moulded Plain Color PVC ‘C’ Channel having a PVC Strip of 20mm width stuck inside with Solvent Cement for Stiles & Plain Color PVC Sheets for Top Rail, Lock Rail & Bottom Rail on Either Side & Gap insert for Top Rail & Bottom Rail, Paneling of Plain Color PVC sheet to be fitted in the Mild Steel Frame, welded/sealed to the Stiles & Rails with suitable PVC Sheet Beading & jointed together with Solvent Cement and fixing in the Frame with Butt Hinges as per Site as per Specification and Drawing of MES Schedule, complete all as specified and as directed.NOTE : Butt Hinges will be Measured and Paid under appropriate Item(s). |
| 32 | S&F Aluminium Anodised Barrel Tower Bolt of Size 150mm long, Extruded Section, complete all as specified and as directed. |
| 33 | S&F Stainless Steel Butt Hinge 75mm in size, complete all as specified and as directed. |
| 34 | S&F Aluminium Handle 100mm, Cast type, Anodised, complete all as specified and as directed. |
| 35 | S&F Sheet Glass 3.0mm thick, Plain, Ordinary quality and Glazing with Oil Putty in Square not exc. 0.50 Sqm in Each Pane, complete all as specified and as directed. |
| 36 | M&L TMT Bars 10mm dia and Over, Cut to length, Bent to Shape required including Cranking, Bending Spirally for Hooping for Columns, hooking Ends and Binding with and including Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed. |
| 37 | M&L TMT Bars 8.0mm dia, cut to length bent to shape required, including cranking, bending spirally for hooping for Columns, hooking Ends and binding with and including Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed. |
| 38 | M&L TMT Bars 8.0mm dia in Stirrups, Spacers and Binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed. |
| 39 | M&L Mild Steel Round Bars 10mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for Columns, hooking Ends and binding with and including Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed. |
| 40 | M&L Mild Steel Bands, Straps, Supports or Stays for Rain Water, Ventilating Pipes including Bolts (if required), Heavy Hooks (Stay) for Large Gates; Hook and Pintle Hinges, Large Hasps and Staples; Chains; Hand Made Sliding Bolts; Clamps; Holdfasts (Flat Iron 25x4.0mm); Wall Ties; Hooks for Hanging Fans; Plain Angle Cleats for securing Purlins to Wood Trusses or Rafters; Knee Piece inserts; 2-way and 3-way Straps, Plate Washers and Similar Small Articles, conform to Fe-290 Gde-E-165, complete all as specified and as as directed. |
| 41 | M&L Mild Steel Framed Works such as Grills, Gratings, etc. with Ends of Bars shouldered and/or riveted or forged into Spikes; Framed Guard Bars; Barred Iron Doors; Ladders; Framed Balusters; Walkways; Railings; Framework of Water Tanks and similar Work, conforming to Fe-290, Gde-E-165, complete all as specified and as directed. |
| 42 | M&L Rolled Mild Steel Sections in Joist, Channel, Angle, or Tee Sections in Vertical Post, fixed independently, without Connecting Plates, etc. (cut to ordinary Lengths i.e. within 20mm of the Length indicated), conforming to Fe-410-W (Gde E-250) Quality \"B\", complete all as specified and as directed. |
| 43 | M&L Rolled Mild Steel Sections in Main and Cross Beams, Hip & Jack Rafters, Purlins where connected to Common Rafters, Running Rails and Guides for Sliding Doors, conforming to Fe-410-W (Gde E-250), Quality \"A\", fixed with Angle Cleats or Other Connecting Plates, complete all as specified and as directed. |
| 44 | M&L Mild Steel Tubular Trusses including Special Shaped Washers, etc. complete using ERW or Induction Butt welded Tubes, confirming to IS:1161-1979, Grade St-240, complete all as specified and as directed. |
| 45 | M&L Plates (Plain or Chequered) Channels, Square cut or Notched (Ordinary and Counter Sunk) forming Holes, without any Aattachment, conform to Gde Fe-410-W (Gde E-250) Quality \"B\", complete all as specified and as directed. |
| 46 | S&F Steel windows with side Hung Shutters including Projecting Type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed. |
| 47 | S&F Pre-painted Galvalume Aluminum Zinc Coating GI based Corrugated Steel Sheet 0.50mm thick Coloured, having Tensile Strength of 550 Mpa in Roof Covering, Cladding to Walls, fixed with Aluminum Self Tapping Screws and Aluminum Washers of suitable Size, complete all as specified and as directed. |
| 48 | S&F Pre-painted Galvalume Aluminum Zinc Coating GI based Plain Steel Sheet 0.50mm thick Coloured, having Tensile Strength of 550 Mpa in Ridges/Roof Covering, Cladding to Walls, fixed with Aluminum Self Tapping Screws and Aluminum Washers of suitable Size, complete all as specified and as directed. |
| 49 | M&L Cement Concrete 1:4:8 (40mm graded stone aggregate) 100mm thick in Sub-base to Floor, etc., complete all as specified and as directed. |
| 50 | M&L Cement Concrete 1:4:8 (40mm graded stone aggregate) 75mm thick in Sub-base to Floor, etc., complete all as specified and as directed. |
| 51 | M&L Cement Concrete 1:2:4 (12.5mm graded stone aggregate) 25mm thick in Sub-base for laying of Tiles, etc. including maintaining Level Uniformly, finished Concrete Surfaces Fair and Even, complete all as specified and as directed. |
| 52 | M&L Non-Skid Ceramic Coloured Tiles 7.0mm to 8.0mm thick (Square/ Rect-angular), Area of Each Tile exc. 0.11 Sqm but not exc. 0.18 Sqm (1st quality) in Floors, Jointed in Neat Cement Slurry and Pointed in Coloured Cement to match the Tile, laid over and including Screed or Screed Bed 15mm thick in Cement Mortar 1:6, complete all as specified and as directed.NOTE : Cost of Cement Screed Bed will deem to include in Quoted Unit Rate. |
| 53 | M&L Glazed Ceramic Coloured Tiles 300x200x6.0-7.0mm thick (1st quality) conforming to IS:13753, in Vertical Surfaces i.e. Dado, Skirting, etc., Set in Neat Cement Slurry and Pointed in Coloured Cement to match the Tile, fixing over and including Screed or Screed Bed 10mm thick in Cement Mortar 1:4, complete all as specified and as directed.NOTE : Cost of Cement Screed Bed will deem to include in Quoted Unit Rate. |
| 54 | M&L Cement Concrete 1:3:6 (40mm graded stone aggregates) 75mm thick in Plinth Protection, etc, Laid in Alternate Panels, finished Concrete Surfaces Even and Smoooth without Using Extra Cement, complete all as specified and as directed. |
| 55 | M&L Cement Concrete 1:2:4 (20mm graded stone aggregate) 100mm thick in Hardstanding, etc., Laid in Alternate Panels, finished Concrete Surfaces Even and Smooth without using Extra Cement, complete all as specified and as directed. |
| 56 | M&L Forming Construction 30mm Deep x 10mm Wide and filled with Sealing Compound Grade \"A\", complete all as specified and as directed. |
| 57 | M&L Rendering in ceiling, 5mm thick in Cement Mortar 1:3 on Concrete Works, finished Plastered Surfaces Fair and Even without using Extra Cement, complete all as specified and as directed. |
| 58 | M&L Rendering (Internal) 10mm thick in Cement Mortar 1:6 on Brick/ PCC Blocks or Concrete Works, finished Plastered Surfaces Even and Smooth without using Extra Cement, complete all as specified and as directed. |
| 59 | M&L Rendering 15mm thick in Cement Mortar 1:4 on Brick/ PCC Blocks or Concrete Works, finished Plastered Surfaces Even and Smooth without using Extra Cement, complete all as specified and as directed. |
| 60 | M&L Rendering (External) 15mm thick on Bricks/Pre-cast Blocks or Concrete Works consisting in 2 layers, Backing/Under layer of 10mm thick in Cement Mortar 1:6 and Float/Top layer 5.0mm thick in Cement Mortar 1:4 including mixing WPC to Float/ Top layer, finished Fair and Even, complete all as specified and as directed.NOTE : Water Proofing Compound (WPC) will be Measured & Paid separately under appropriate Item. |
| 61 | Supply only Water Proofing Compound (as approved), conforming to IS:2645-2003, complete all as specified and as directed. |
| 62 | M&L Preparing Newly Plastered Surfaces of ceiling and applying Three Coats of White Wash , complete all as specified and as directed. |
| 63 | M&L Preparing Newly Plastered Surfaces of Walls and applying Three Coats of White Wash, complete all as specified and as directed. |
| 64 | M&L Preparing Newly Plastered Surfaces of Walls and applying Two Coats of Cement Based Paint (of approved Tint) over a Coat of Alkali Resistant Priming Paint, complete all as specified and as directed. |
| 65 | M&L Preparing Steel and Iron Surfaces of any descriptions, exc. 10 Cm in Width or Girth and applying Two Coats of Synthetic Enamel Paint (1st quality/grade Paint of approved Tint) over a Coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed. |
| 66 | S&F Galvanised Steel Tubing 15mm bore (dia), medium grade, conforming to IS-1239 with all Fittings, fixed to Walls, Ceiling or laid in Floors, complete all as specified and as directed. |
| 67 | S&F Galvanised Steel Tubing 20mm bore (dia), medium grade, conforming to IS-1239 with all Fittings, fixed to Walls, Ceiling or laid in Floors, complete all as specified and as directed. |
| 68 | S&F Bib Tap 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fency type, screwed down, high pressure, with Crutch or Butter-fly Handle, screwed both Ends for Iron Pipe or for Unions, complete all as specified and as directed. |
| 69 | S&F Pillar Tap 15mm bore (dia), Cast Copper alloy, Chromium Plated, with Capstan Heads, screwed down high pressure, with or without Lettered \"Hot\" or \"Cold\" with Long Screwed Shanks and Fly-nuts, screwed for Iron Pipe, complete all as specified and as directed. |
| 70 | S&F Angle Valve 15mm bore (dia), Cast Copper alloy, Chromium Plated, screwed down, high pressure, with Crutch or Butter-fly handle, screwed both Ends for Iron Pipe or for Unions, complete all as specified and as directed. |
| 71 | S&F Stop Valve 15mm bore (dia), Cast Copper alloy, Chromium Plated, screwed down, high pressure, with Crutch or Butter-fly handle, screwed both Ends for Iron Pipe or for Unions, complete all as specified and as directed. |
| 72 | S&F Gun Metal Globe/Gate Valve 20mm bore (dia) with Iron Wheel Head, screwed both Ends for Iron Pipe, complete all as specified and as directed. |
| 73 | M&L Rotational Moulded Polyethene Water Storage Tank 1000 Litre Capacity, Cylindrical, Vertical with Closed Top, 3 layered, conforming to IS:12701-1996, hoisted and fixed in Position all as specified in MES Schedule, complete all as specified and as directed. |
| 74 | S&F PTMT Ball Valve 20mm bore (dia), having weight not less than 210 Grams, high pressure with Epoxy coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe, complete all as specified and as directed. |
| 75 | M&L Vitreous China White Squatting Pan of size 580x440mm, Orissa Pattern with Integral Foot Rests, PVC (SWR) ‘P’ or ‘S’ Trap, providing Joints between Flush Pipe and Socket of WC Pan, Cones, India Rubber (nozzles of WC Pan) incluiding provision of Lime Concrete Bedding and Making Good to Floor/ Distrubed Surfaces, complete all as specified and as directed. |
| 76 | M&L PVC Flushing Cistern 10 Litre capacity White, Low Level, Valveless, Syphonic Action type with Inlet, Ball Valve, Float and Handle, a Pair of Cast Iron Brackets Erecting Stand duly Painted, including PVC Flush Pipe 32mm dia with PVC Long Bend, Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3, complete all as specified and as directed. |
| 77 | S&F Vitreous China White Wash Hand Basin 600x480mm in Size, Flat Back with Brass Chromium Plated Waste Fitting 32mm bore (dia) and PVC Waste Pipe 32/40mm bore (dia) of suitable Length, a Pair of Cast Iron Brackets/ Erecting Stand duly Painted, Cutting and Pinning in Ends and Making Good Disturbed Surfaces in Cement Mortar 1:3, complete all as specified and as directed. |
| 78 | S&F PTMT Bottle Trap 40mm bore (dia) having (Minimum Weight 270 Grams) and Minimum Water Seal of 25mm suitable for Wash Hand Basins with Inlet and Outlet, screwed for Pipe or Connections including necessary Packing, Uunion, Cap, complete all as specified and as directed. |
| 79 | S&F PVC Connection Pipe 15mm in Size and 450mm in length with PTMT Nuts suitable for connecting with Flushing Cistern, Wash Hand Basin, etc., complete all as specified and as directed. |
| 80 | S&F Looking Mirror 600x450mm in Size, 5.5mm thick Selected quality Glass, Bevelled edge, with Rigid PVC Frame around and mounted on 4.0mm thick PVC Sheet or 6.0mm thick Commercial Ply, fixed to Wall with Brass Chromoum Plated Screws on Wooden/ PVC Cleats, complete all as specified and as directed. |
| 81 | S&F Tubular Towel Rail 20mm dia, Brass Chromium Plated, D-type, 60 Cm long between Flanges with Bracket (One Pair), fixing to Walls with and includingChromium plated Brass Screws and Wooden/ Plastic Cleats, complete all as specified and as directed. |
| 82 | S&F Chromium Plated Shower Rose with Shower Arm 125mm, Swival Joint including fixing to Steel Pipe, complete all as specified and as directed. |
| 83 | S&F PVC (SWR) 75mm bore (dia) Floor Trap having Diameter of Outlet 75mm, Plain with Grating including Jointing with Solvent Cement, complete all as specified and as directed. |
| 84 | S&F PVC (SWR) 75mm bore (dia) Pipe, Single Socketed, in any length with Rubber Ring Joints, fixing to Walls or laid in Floorsl/Trenches, complete all as specified and as directed. |
| 85 | S&F PVC (SWR) 75mm bore (dia) Bends (any Radius), Diminishing Pieces or Tapers (Larger bore measured) Fittings for PVC (SWR) Pipe, Jointing with Solvent Cement, complete all as specified and as directed. |
| 86 | S&F PVC (SWR) 75mm bore (dia) Junction, Single (Single T) Equal or Unequal with Access Door, etc., Jointing with Solvent Cement, complete all as specified and as directed. |
| 87 | S&F PVC (SWR) Vent Cowl 75mm bore (dia), jointing with Solvent Cement, complete all as specified and as directed. |
| 88 | S&F PVC (SWR) 110mm bore (dia) Pipe, Single Socketed, in any length with Rubber Ring Joints, laid in Trenches or in floor, complete all as specified and as directed. NOTE : Necessary Earth Works will be Measured and Paid separately under appropriate Items here-in-before. |
| 89 | M&L Cement Concrete 1:3:6 (40mm graded stone aggregate) in Concrete Bed to Drain Pipes of 110mm bore (dia) including Packing Under and Haunching against the Sides of Pipes after they are laid and Tested; complete all as specified and as directed.NOTE :1.Cost of Formwork will deemed to be included in the Quoted Unit Rate.2. Necessary Earth Works will be Measured and Paid for separately under appropriate Items. |
| 90 | M&L Cutting into existing Manholes for Connecting New Drain Pipes of 110mm (Internal dia), Making Good to Pipe and rendering, cutting out existing Benching for and forming Branch Channel (½ Round or ¾ Section) in Cement Concrete 1:2:4 (20mm graded stone aggregate), smooth finished and reforming Benching as required, complete all as specified and as directed. |
| 91 | SUB TOTAL OF SCHEDULE \"A\" Part - I |
| 92 | SCHEDULE \"A\" PART - II [E/M SERVICES/WORKS] |
| 93 | M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded single core Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Wire, drawn in and including PVC Casing Capping (ISI Marked) of suitable Size (approx 25/32/40mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. complete with PVC Board of suitable Size for accommodat-ing Switches, Sockets, Regulators, etc. Earth Continuity Wire connected to Common Earth dolly for ONE LIGHT/ FAN/ BELL POINT controlled by One 1-way Switch 6 Amp, complete all as specified and as directed. |
| 94 | M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded single core Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Wire for ONE 3 PIN SOCKET 6 AMP POINT on SAME BOARD, complete all as specified and as directed. |
| 95 | M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded single core Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Wire, drawn in and including PVC Casing Capping (ISI Marked) of suitable Size (approx 25/32/40mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. complete with PVC Board of suitable Size for accommodat-ing Switches, Sockets, Regulators, etc. Earth Continuity Wire connected to Common Earth dolly for ONE 3/5 PIN SOCKET OUTLET 6 AMP POINT on INDEPENDENT BOARD, complete all as specified and as directed. |
| 96 | M&L Point Wiring with 2.5 Sqmm (nominal area) 1100 Volt grade PVC insulated Unsheathed FRLSH Multi-stranded Single Core Copper Conductor Cable with 2.5 Sqmm (nominal area) 1100 Volt grade PVC insulated Unsheathed FRLSH Multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Wire, drawn in and including PVC Casing Capping (ISI Marked) of suitable Size (25/32/40mm Width) along with all Fitting/Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. including suitable Size PVC Board with 3.0mm thick Plastic Laminated Sheet Cover for mounting Switches, Sockets, Regulators, etc., Earth Continuity Wire connected to Common Earth dolly for ONE 6/16 AMP 3/5 PIN SOCKET POINT on INDEPENDENT BOARD, complete all as specified and all as directed. |
| 97 | S&F Switch Piano 6 Amp, Single Pole, Flush type, 1-way, 230 Volt AC and Connecting up, complete all as specified and as directed. |
| 98 | S&F Socket Outlet 6 Amp, 5 Pin, Flush type, 230 Volt AC and Connecting up, complete all as specified and as directed. |
| 99 | S&F Switch Socket Combination 6 Amp, 2-in-1, 230 Volt AC, complete all as specified as directed. |
| 100 | S&F Switch Socket Combination 16 Amp, 2 Pin & 3 Pin, 2-in-1, Multi-Plug, Flush type, 230 Volt AC and Connecting up, complete all as specified and as directed. |
| 101 | S&F Ceiling Rose 65x50mm, 3 Terminals, Surface Bakelite suitable for 230 Volt AC and Connecting up, complete all as specified and as S&F Socket Outlet 6 Amp, 5 Pin, Flush type, 230 Volt AC and Connecting up, complete all as specified and as directed. |
| 102 | S&F LED Tube Light 1x20 Watt, Decorative, Ultra Slim Round profile, Connecting up with and including Twin Flexible Copper Wire , complete all as specified and as directed. |
| 103 | S&F Metallic Body Exhaust Fan 450mm Sweep with Louver, Heavy Duty, Single Phase, 230/240 Volt with Fixing Arrangement using Fastener, Providing Electric Connection from Ceiling Rose to Exhaust Fan with and including Copper Conductor Cable of suitable Size and Length, 3 Core, complete all as specified and as directed. |
| 104 | S&F MCB 6 Amp to 32 Amp, Single Pole, \"C\" Curve, 50 Hz, 10 kA, 240 Volt and Connecting up, complete all as specified and as directed. |
| 105 | S&F MCB 6 Amp to 32 Amp, Single Pole & Neutral, \"C\" Curve, 50 Hz, 10 kA, 240 Volt and Connecting up, complete all as specified and as directed. |
| 106 | S&F Sheet Metal Enclosure for DB\"s when MCBs to be used SPN 2-way, 240 Volt AC, Single Door, IP-43 Protected, Epoxy Based Powder coated, without Bus-bars and Connecting up, complete all as specified and as directed. |
| 107 | S&F Factory made Sheet Metal Enclosure for DB\"s when MCBs to be used SPN 4-way, 240 Volt AC, Double Doors, Front Openable, IP-43 Protected, Epoxy Based Powder coated suitable for mounting MCB DP/ SPN as Incomer and MCB SP as Out-goings with 200 Amps rated Bus-bar, Neutral Bar, Earth Bar, Connecting Cable Links and Connecting up, complete all as specified and as directed. |
| 108 | M&L Earthing with Galvanised Earth Plate Electrode 600x600x6.0mm thick, buried directly in Ground vertically to a depth not less than 2.25 Metre below Ground Level with Top Edge of Earth Plate at depth not less than 1.50 Metre below normal Ground Level, connectedto Galvanised Earth Lead Wire 4.0mm dia by means of Bolts, Nuts, Check, Nuts and Washers of Galvanised Iron or Steel and Earth Wire protected with and including GI Pipe 15mm bore (dia) Light grade, connected to Test Point upto 7.50 Metre away from Earth Electrode situated, Earth Plate surrounded by a packed thickness of Char Coal or Coke Dust mixed with Common Salt in alternate layers of not exc.150mm thick, PCC Pit in Cement Concrete 1:3:6 (20mm graded stone aggregate) and Pre-cast RCC Cover Slab of Size 350x350x50mm in Cement Concrete 1:2:4 (20mm graded stone aggregate), reinforced with 10mm dia TMT Bars @ 100mm Centre to Centre in both ways, GI Wire Mesh, PGI Funnel with GI Watering Pipe 20mm bore (dia) Medium grade including necessary Excavation in Soft/ Loose Soil, Returning, Filling in and Removal of surplus Spoil upto a distance of 50.00 Metre and all as shown in Electrical Plate No. 3 of MES Schedule Part-I and Testing, complete all as specified and as directed. |
| 109 | Excavating in Trenches, not exc. 1.50 Metre Wide and Depth not exc. 1.50 Metre for Taking out/up and Laying of Water Pipe Line, Electric Cable Line, etc., Forming Surfaces to required Foundation, etc. and getting out as in Soft/Loose Soil, complete all as specified and as directed. |
| 110 | Returning, Filling in including Spreading, Levelling, Watering, Well Ramming in Layers not exc. 25 Cm, Providing Heaps along the Route of the Water Pipe Line, Electric Cable Line, etc. with Surplus Soil in Soft/Loose Soil, complete all as specified and as directed. |
| 111 | Supplying, Laying & Testing LT Under Ground Cable 1100 Volt grade, XLPE insulated, PVC sheathed, Heavy duty, Armoured with multi-stranded Aluminium Conductor all as per IS:7098 (Part-I)-1998 having Cross-sectional Area 10 Sqmm, 2 Core, laid in Trenches, Ducts or through Pipes, etc., complete all as specified and as directed. NOTE : Earth Works, Protection Pipes/ Bricks or Pre-cast Concrete Cable Covers, etc. will be Measured and Paid separately under relevent Items. |
| 112 | S&F Galvanised Steel Tubing 25mm bore (dia), medium grade, conforming to IS-1239 with all Fittings/ Connections, laid intrenches, complete all as specified and as directed. |
| 113 | S&F Galvanised Steel Tubing 32mm bore (dia), medium grade, conforming to IS-1239 with all Fittings/ Connections, laid intrenches, complete all as specified and as directed. |
| 114 | S&F Gun Metal Globe/Gate Valve 25mm bore (dia) with Iron Wheel Head, screwed both Ends for Iron Pipe, complete all as specified and as directed. |
| 115 | Supply & Installation, Commissioning & Testing Chemical Dozing Pump 6.00 LITRE PER HOUR @ 04 KG Back Pressure Capacity, Electro-magnetic and Diaphragm type with High Pressure andAdjustable Precision Fluid Delivery from 0 to 100 PSI, complete all as specified and as directed. |
| 116 | Supply & Installation, Commissioning & Testing Solution preparation cum settling Tank of capacity 100 LITER with lid, Port Hole, Inlet/Outlet/Drain connection, Level Guage, Sludge Deposition Facility and Fitted with Speed Reucig Motor and SS-316 agitator complete all as specified and as directed. |
| 117 | Supply & Installation, Commissioning & Testing Electro-magnetic Water Flow Meter Digital type suitable for 3\" to 4\" Line with following Charasteristics:-(a)Body : SS 304 (b) Liner Material : Hard Rubber(c)Electrodes Material/Grounding : SS 315 (d) Process Connection : Flange(e)Nominal Pressure : 10 Kg/ Sq Cm (f)Accuracy : +0.5%(g)Measuring Flow Range :CUM/HOUR(h) Temperature Range : Normal(j)Calibration Certificate : StandardCONVERTER :-(a)Display Protection : IP65(b) Display : Remote/Integral type(c)Power Supply : 220 Volt AC (d) Power Consumption : 20 Watt(e)Display : LED Display(f) Output : 4 - 20 mA |
| 118 | Supply & Installation, Commissioning & Testing Ultrasonic water level indicator(Probe Unit), Control Unit with digital stage level system, High and Low alarm etc. including Connecting uptransmitter (Probe Unit) at 15 Meter hight with3 Core copper wire fromto Control Unit, complete all as specified and as directed. |
| 119 | S&F PVC Pipe 10mm bore (dia), suitable for connection of Pump to Supply Line, complete all as specified and as directed. |
| 120 | SUB TOTAL OF SCHEDULE \"A\" Part - II |
| 121 | Total Amount in Figures |
| 122 | Quoted Amount in Words |
