Specified Boq For Probable Items With Approximate Quantities For Replacement And Repairing Work Of Cat - Iii Type Rhe Buildings, Kalyani, Nadia - Inside Repairing Works Such As Plastering, White Washing, Door Window Painting, Wood Work Etc, Along With Som, kalyani-West Bengal

Specified Boq For Probable Items With Approximate Quantities For Replacement And Repairing Work Of Cat - Iii Type Rhe Buildings, Kalyani, Nadia - Inside Repairing Works Such As Plastering, White Washing, Door Window Painting, Wood Work Etc, Along With Some Plumbing Works Of Flats No. B1, C1, H2, B6, E5, F5, C7, D7 And F8.-Stripping Off Worn Out Plaster And Raking Outjoints Of Walls, Celings Etc. Upto Any Height And In Any Floor Including Removing Rubbish Within Alead Of 75M As Directed. 2 Cement Concrete ( 1:1.5:3 ) With Graded Stone Chips 5.6 Mm Size With Hexagonal Square Mesh Wire Netting, I.R.C. Fabric Mesh Or X.P. M. Fitted And Fixed After Tying The Existing Reinforcement On Concrete Without Distributing The Same And With Proper Scarping And Cleaning The Reinforcement And Disturbed Concrete With Wire Brush Etc. After Applying A Coat Of Cement & Cost Of All Handling And Scaffolding Complete As Per Direction Of Engineer-In -Charge. ( A ) 20 Mm Thick 3 Dismantling Artificial Stone Flooring Upto 50 Mm.Thick By Carefully Chiselling Without Damaging The Base And Removing Rubbish As Directed Within A Lead Of 75 M. 4 ( I ) Ground Floor 5 ( Ii ) 2Nd Floor 6 ( Iii ) 3Rd Floor 7 Artificial Stone In Floor, Dado, Staircase Etc With Cement Concrete ( 1:2:4 ) With Stone Chips, Laid In Panels As Directed With Topping Made With Ordinary Or White Cement ( As Necessary ) And Marble Dust In Proportion ( 1:2 ) Includingsmooth Finishing And Rounding Off Corners Including Raking Out Joints Or Roughening Of Concrete Surface And Application Of Cement Slurry Before Flooring Works Using Cement @ 1.75 Kg / Sq.M All Complete Including All Materials And Labour. 3 Mm. Thick Topping ( High Polishing Grinding On This Item Is Not Permitted With Ordinary Cement ) .Using Grey Cement ( I ) 25 Mm. Thick 8 ( I ) Ground Floor 9 ( Ii ) 2Nd Floor 10 ( Iii ) 3Rd Floor 11 Plaster ( To Wall, Floor, Ceiling Etc. ) With Sand And Cement Mortar Including Rounding Off Or Chamfering Corners As Directed And Raking Out Joints Including Throating, Nosing And Drip Course, Scaffolding / Staging Where Necessary [ Excluding Cost Of Chipping Over Concrete Surface ] 12 ( I ) With 1:6 Cement Mortar: ( A ) 20 Mm Thick Plaster 13 ( I ) Ground Floor 14 ( Ii ) 2Nd Floor 15 ( Iii ) 3Rd Floor 16 ( I ) With 1: 4 Cement Mortar: ( A ) 10 Mm Thick Plaster 17 ( I ) Ground Floor 18 ( Ii ) 2Nd Floor 19 ( Iii ) 3Rd Floor 20 Supplying, Fitting And Fixing Fibre Reinforced Polymer ( Frp ) Composite Door Frame As Per Approved Section With Glass Fibre Reinforced Plastic Moulded Skins And A Special Sandwich Core, So As To Impart Monolitaheic Composite Structure As Per Approved Technology Of Department Of Science And Technology ( Dst ) To Safisfy Is: 4020 Door Testing Performance Criteria. ( I ) 66Mm X 90Mm 21 Supplying, Fitting & Fixing Fibre Reinforced Polymer ( Frp ) Composite Door Shutters As Per Approved Design With Glass Fibre Reinforced Plastic Moulded Skins And A Special Sandwich Core, So As To Impart Monolitaheic Composite Structure As Per Approved Technology Of Department Of Science And Technology ( Dst ) To Satisfy Is:4020 Door Testing Performance Criteria. ( I ) 32 Mm Thick 22 ( I ) Ground Floor 23 ( Ii ) 2Nd Floor 24 ( Iii ) 3Rd Floor 25 Removal Of Rubbish, Earth Etc. From The Workingsite And Disposal Of The Same Beyond Thecompound, In Conformity With The Municipal / Corporation Rules For Such Disposal, Loading Into Truck And Cleaning The Site In All Respect As Per Direction Of Engineer In Charge 26 White Washing Including Cleaning Andsmoothening Surface Thoroughly.All Floors : ( B ) Two Coats ( To Be Done On Specific Instruction ) . 27 Labour For Taking Out Door And Window Frame Including Shutter For Repair Or Replacement Of Different Parts Of The Frame & Refixing The Same Including Mending Good All Damaes Complete. ( Concrete And Brick Work For Mending Damage Will Be Paid Separately ) ( A ) Upto Area 2.5 Sq.M 28 Taking Out Shutter Of Door And Window, Dismantling By Parts ( For Repair Orreplacement Of Damaged Parts ) , Reassembling And Refitting And Rehanging Same With Old Fittings But With New Screws As Necessary. 29 Wood Work In Door And Window Frame Fitted And Fixed In Position Complete Including A Protective Coat Of Painting At The Contact Surface Of The Frame Exluding Cost Of Concrete, Iron Butt Hinges And M.S Clamps. ( The Quantum Should Be Correted Upto Three Decimals ) . ( D ) Sal : Local. 30 ( I ) Ground Floor 31 ( Ii ) 2Nd Floor 32 ( Iii ) 3Rd Floor 33 Panel Shutters Of Door And Window, As Per Design ( Each Panel Consisting Of Singleplank Without Joint ) , Including Fitting And Fixing The Same In Position But Excluding The Cost Of Hinge And Other Fittings. ( In Case Of Non-Supply Of Single Plank, Penal Rate Of Reduction Of 20% Will Be Made ) ( Iii ) 35Mm Thick Shutters With 19Mm Thick Panel Of Size 30 To 45 Cm. ( B ) Sishu, Gamar, Champ, Badam, Bhola, Mogra, Hallak. 34 ( I ) Ground Floor 35 ( Ii ) 2Nd Floor 36 ( Iii ) 3Rd Floor 37 Renewing M.S. Clamps For Door And Window Frame Made Of Flat Bent Bar, End Bifurcated With Necessary Screws Etc. In Cement Concrete ( 1:2:4 ) Including Cuttingof Brick Work / Concrete Work As Per Direction. ( Cost Of Concrete Will Be Paid Separately ) ( A ) 40Mm X 6Mm, 250Mm Length 38 Ordinary Cement Concrete ( Mix 1:2:4 ) With Graded Stone Chips ( 20 Mm Nominal Size ) Excluding Shuttering And Reinforcement, If Any, As Per Relevant Is Codes.A ) Pakur Variety 39 ( I ) Ground Floor 40 ( Ii ) 2Nd Floor 41 ( Iii ) 3Rd Floor 42 Iron Butt Hinges Of Approved Quality Fitted And Fixed With Steel Screws, With Isi Mark. 43 ( Vi ) 100Mm. X 50Mm. X 1.25Mm. 44 ( Iii ) 75Mm. X 40Mm. X 1.12Mm. 45 Iron Socket Bolt Of Approved Quality Fitted And Fixed Complete. 46 ( B ) 100Mm Long X 10Mm Dia Bolt. 47 ( C ) 150Mm Long X 10Mm Dia Bolt. 48 Easing Door And Windows. 49 Iron Catch Hook Of Approved Quality Fitted And Fixed To Shutter And Chowkat. ( B ) 6Mm Dia X 225Mm Long. 50 ( A ) Iron Door Ring Of Approved Quality Fitted And Fixed With Nut And Washer Complete. ( I ) 50Mm Dia. 51 I ) Iron Hasp Bolt Of Approved Quality Fitted And Fixed Complete ( Oxidised ) With 16Mm Dia Rod With Centre Bolt And Round Fitting. ( B ) 250Mm Long. 52 Supplying Best Indian Sheet Glass Panes Set In Putty And Fitted And Fixed With Nails And Putty Complete. ( In All Floors For Internal Wall & Upto 6M Height For External Wall ) ( I ) 3 Mm Thick ( Weighing 7.4 Kg / Sq.M ) 53 ( B ) Priming One Coat On Timber Or Plastered Surface With Synthetic Oil Bound Primer Of Approved Quality Including Smoothening Surfaces By Sand Papering Etc. 54 ( A ) Priming One Coat On Steel Or Other Metal Surface With Synthetic Oil Bound Primer Of Approved Quality Including Smoothening Surfaces By Sand Papering Etc. 55 ( A ) Painting With Best Quality Synthetic Enamel Paint Of Approved Make And Brand Including Smoothening Surface By Sand Papering Etc. Including Using Of Approved Putty Etc. On The Surface, If Necessary : 56 ( A ) On Timber Or Plastered Surface :With Super Gloss ( Hi-Gloss ) - ( Iv ) Two Coats ( With Any Shade Except White ) 57 ( B ) On Steel Or Other Metal Surface :With Super Gloss ( Hi-Gloss ) - ( Iv ) Two Coats ( With Any Shade Except White ) 58 Supplying, Fitting & Fixing Of G.I. Plain Tee Of Approved Brand And Make 59 ( I ) 15 Mm 60 ( Ii ) 20 Mm 61 ( Iii ) 25 Mm 62 Supplying, Fitting & Fixing Of G.I. Plain Equal Elbow Of Approved Brand And Make. 63 ( I ) 15 Mm 64 ( Ii ) 20 Mm 65 ( Ii ) 25 Mm 66 Supplying. Fitting & Fixing Of Long Screw ( 150 Mm Long ) Of Tata Make With Sockets ( Tata Make ) And Jamnut. 67 ( I ) 15 Mm 68 ( Ii ) 20 Mm 69 ( Ii ) 25 Mm 70 Supplying, Fitting & Fixing Of G.I. Short Piece Of Tata Make ( Above 50Mm & Upto150 Mmlong ) 71 ( I ) 15 Mm 72 ( Ii ) 20 Mm 73 ( Iii ) 25 Mm 74 Supplying, Fitting & Fixing Of Galvanised Iron Jamnut. ( I ) 15 Mm 75 Supplying, Fitting & Fixing Of G.I. Nipple Standard 50 Mm Long. 76 ( I ) 15 Mm 77 ( Ii ) 20 Mm 78 Supply Of Upvc Pipes ( B Type ) & Fittings Conforming To Is-13592-1992 ( A ) ( I ) Single Socketed 3 Meter Length 79 ( A ) 75 Mm 80 ( B ) 110 Mm 81 ( B ) Fittings: ( Iii ) Door Tee: ( B ) 110 Mm 82 ( B ) Fittings:Xiii ) Cross Tee: ( B ) 110 Mm 83 ( B ) Fittings: ( Xii ) Door Bend ( Lh ) & ( Rh ) ( B ) 110 Mm 84 Supplying, Fitting And Fixing Gunmetal Wheel Valve Of Approved Brand And Make Tested To 21 Kg Per Sq. Cm. ( For Water Lines Only ) . ( Viii ) 20 Mm Dia 85 Supply Of G. I. Pipes Of Tata Make Including Necessary Sockets 86 ( A ) 15 Mm Dia. ( I ) Light Quality 87 ( A ) 20 Mm Dia. ( I ) Light Quality 88 Supplying, Fitting And Fixing Approved Brand P.V.C. Connector White Flexible, With Both Ends Coupling With Heavy Brass C.P. Nut, 15 Mm Dia. ( I ) 450 Mm Long 89 Supplying, Fitting And Fixing Shower Of Approved Brand And Make. ( H ) Polythene Overhead Shower Of Approved Make 15 Mm X 125 Mm 90 Dismantling Sink With Brackets With Or Without Waste Fittings. ( Ii ) Above 450 Mm And Upto 600 Mm Length 91 Dismantling Drain Board. 92 Supplying, Fitting And Fixing Stainless Steel Sink Complete With Waste Fittings And Two Coats Of Painting Of C.I. Brackets. ( A ) Sink Only: ( I ) 530 Mm X 430 Mm X 180 Mm 93 Supplying, Fitting And Fixing Bib Cock Or Stop Cock. 94 ( E ) Ptmt ( Polytetra Bib Cock / Stop Cock ( Prayag Or Equivalent ) 15 Mm 95 ( G ) Supplying, Fitting And Fixing Alloy Iron With Brass Spindle Bib Cock / Stop Cock Of Approved Brand And Make, Spray Painted And Tested To 21 Kg Per Sq. Cm. ( I ) 15 Mm 96 Supplying, Fitting And Fixing Approved Brand 32 Mm Dia.P.V.C. Waste Pipe, With Pvc Coupling At One End Fitted With Necessary Clamps. ( I ) 1050 Mm Long 97 Supplying, Fitting And Fixing Waste Fittings Complete. ( A ) C.P. Over Brass ( I ) 32 Mm 98 Supplying, Fitting And Fixing Pillar Cock Of Approved Make.B ) Ptmt Pillar Cock - 15 Mm. ( Prayag Or Equivalent ) . 99 Supplying, Fitting And Fixing Anglo-Indian W.C. In White Glazed Vitreous China Ware Of Approved Make Complete In Position With Necessary Bolts, Nuts Etc. ( A ) With P Trap ( With Vent ) 100 Supplying, Fitting And Fixing 10 Litre P.V.C. Low-Down Cistern Conforming To I.S. Specification With P.V.C. Fittings Complete, C.I. Brackets Including Two Coats Of Painting To Bracket Etc. 101 Supplying, Fitting And Fixing Closet Seat Of Approved Make With Lid And C.P. Hinges, Rubber Buffer And Brass Screws Complete. ( B ) Anglo Indian: ( I ) Plastic ( Hallow Type ) Black 102 Renewing Cast Iron Inspection Door With Bolts And Nuts Complete For Fittings Of 50 Mm Dia. To 150 Mm Dia. H.C.I. Pipe. 103 Renewing Polythene Ball Of Approved Quality For Pipe Of Dia.: ( I ) 32 Mm 104 Cleaning Wash Basin / Sink With Acid. 105 Cleaning E.P. Or Anglo-Indian W.C. With Acid. 106 Subtotal 107 Gst @ 18 % 108 Cess @ 1 %

Refer document

INR 6136.0 /-

INR 3.06 Lakhs /-

Name of Work: Specified BOQ for probable items with approximate quantities for Replacement and repairing work of Cat - III type RHE buildings, Kalyani, Nadia - inside repairing works such as plastering, white washing, door window painting, wood work etc, along with some plumbing works of flats no. B1, C1, H2, B6, E5, F5, C7, D7 and F8.

Sl. No.	Item Description
1	Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed.
2	Cement concrete (1:1.5:3) with graded stone chips 5.6 mm size with hexagonal square mesh wire netting, I.R.C. fabric mesh or X.P. M. fitted and fixed after tying the existing reinforcement on concrete without distributing the same and with proper scarping and cleaning the reinforcement and disturbed concrete with wire brush etc. after applying a coat of cement & cost of all handling and scaffolding complete as per direction of Engineer-in -charge. (a) 20 mm thick
3	Dismantling artificial stone flooring upto 50 mm. thick by carefully chiselling without damaging the base and removing rubbish as directed within a lead of 75 m.
4	(i) Ground Floor
5	(ii) 2nd Floor
6	(iii) 3rd Floor
7	Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. 3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement). Using grey cement (i) 25 mm. thick
8	(i) Ground Floor
9	(ii) 2nd Floor
10	(iii) 3rd Floor
11	Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary [Excluding cost of chipping over concrete surface]
12	(i) With 1:6 cement mortar: (a) 20 mm thick plaster
13	(i) Ground Floor
14	(ii) 2nd Floor
15	(iii) 3rd Floor
16	(i) With 1: 4 cement mortar: (a) 10 mm thick plaster
17	(i) Ground Floor
18	(ii) 2nd Floor
19	(iii) 3rd Floor
20	Supplying, fitting and fixing fibre reinforced polymer (FRP) Composite door frame as per approved section with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to safisfy IS: 4020 door testing performance criteria. (i) 66mm x 90mm
21	Supplying, fitting & fixing fibre reinforced polymer (FRP) Composite door shutters as per approved design with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to satisfy IS:4020 door testing performance criteria. (i) 32 mm thick
22	(i) Ground Floor
23	(ii) 2nd Floor
24	(iii) 3rd Floor
25	Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge
26	White washing including cleaning andsmoothening surface thoroughly. All floors : (b) Two coats (to be done on specific instruction).
27	Labour for taking out door and window frame including shutter for repair or replacement of different parts of the frame & refixing the same including mending good all damaes complete. (Concrete and brick work for mending damage will be paid separately) (a) Upto area 2.5 Sq.m
28	Taking out shutter of door and window, dismantling by parts (for repair or replacement of damaged parts) , reassembling and refitting and rehanging same with old fittings but with new screws as necessary.
29	Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). (d) Sal : Local.
30	(i) Ground Floor
31	(ii) 2nd Floor
32	(iii) 3rd Floor
33	Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings. (In case of non-supply of single plank, penal rate of reduction of 20% will be made) (iii) 35mm thick shutters with 19mm thick panel of size 30 to 45 cm. (b) Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak.
34	(i) Ground Floor
35	(ii) 2nd Floor
36	(iii) 3rd Floor
37	Renewing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. In cement concrete (1:2:4) including cuttingof brick work/concrete work as per direction. (Cost of concrete will be paid separately ) (a) 40mm X 6mm, 250mm Length
38	Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, as per relevant IS codes. a) Pakur Variety
39	(i) Ground Floor
40	(ii) 2nd Floor
41	(iii) 3rd Floor
42	Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark.
43	(vi) 100mm. X 50mm. X 1.25mm.
44	(iii) 75mm. X 40mm. X 1.12mm.
45	Iron socket bolt of approved quality fitted and fixed complete.
46	(b) 100mm long x 10mm dia bolt.
47	(c) 150mm long x 10mm dia bolt.
48	Easing door and windows.
49	Iron catch hook of approved quality fitted and fixed to shutter and chowkat. (b) 6mm dia x 225mm long.
50	(A) Iron door ring of approved quality fitted and fixed with nut and washer complete. (i) 50mm dia.
51	i) Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting. (b) 250mm long.
52	Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & upto 6 m height for external wall) (i) 3 mm thick (weighing 7.4 kg/Sq.m)
53	(b) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
54	(a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
55	(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. Including using of approved putty etc. on the surface, if necessary :
56	(a) On timber or plastered surface : With super gloss (hi-gloss) - (iv) Two coats (with any shade except white)
57	(b) On steel or other metal surface : With super gloss (hi-gloss) - (iv) Two coats (with any shade except white)
58	Supplying, fitting & fixing of G.I. plain tee of approved brand and make
59	(i) 15 mm
60	(ii) 20 mm
61	(iii) 25 mm
62	Supplying, fitting & fixing of G.I. plain equal elbow of approved brand and make.
63	(i) 15 mm
64	(ii) 20 mm
65	(ii) 25 mm
66	Supplying. Fitting & fixing of long screw (150 mm long) of TATA make with sockets (TATA make) and jamnut.
67	(i) 15 mm
68	(ii) 20 mm
69	(ii) 25 mm
70	Supplying, fitting & fixing of G.I. short piece of TATA make (Above 50mm & upto150 mm long)
71	(i) 15 mm
72	(ii) 20 mm
73	(iii) 25 mm
74	Supplying, fitting & fixing of galvanised iron jamnut. (i) 15 mm
75	Supplying, fitting & fixing of G.I. nipple standard 50 mm long.
76	(i) 15 mm
77	(ii) 20 mm
78	Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 (A) (i) Single Socketed 3 Meter Length
79	(a) 75 mm
80	(b) 110 mm
81	(B) Fittings: (iii) Door Tee: (b) 110 mm
82	(B) Fittings: xiii) Cross Tee: (b) 110 mm
83	(B) Fittings: (xii) Door Bend (LH) & (RH) (b) 110 mm
84	Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). (viii) 20 mm dia
85	Supply of G. I. pipes of TATA make including necessary sockets
86	(a) 15 mm dia. (i) Light quality
87	(a) 20 mm dia. (i) Light quality
88	Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. (i) 450 mm long
89	Supplying, fitting and fixing shower of approved brand and make. (h) Polythene overhead shower of approved make 15 mm X 125 mm
90	Dismantling sink with brackets with or without waste fittings. (ii) Above 450 mm and upto 600 mm length
91	Dismantling drain board.
92	Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. brackets. (a) Sink only: (i) 530 mm X 430 mm x 180 mm
93	Supplying, fitting and fixing bib cock or stop cock.
94	(e) PTMT (Polytetra Bib Cock / Stop Cock ( Prayag or equivalent) 15 mm
95	(g) Supplying, fitting and fixing alloy iron with brass spindle bib cock/ stop cock of approved brand and make, spray painted and tested to 21 kg per sq. cm. (i) 15 mm
96	Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps. (i) 1050 mm long
97	Supplying, fitting and fixing Waste fittings complete. (a) C.P. over brass (i) 32 mm
98	Supplying, fitting and fixing pillar cock of approved make. b) PTMT Pillar Cock - 15 mm. (Prayag or equivalent).
99	Supplying, fitting and fixing Anglo-Indian W.C. in white glazed vitreous china ware of approved make complete in position with necessary bolts, nuts etc. (a) With "P" trap (with vent)
100	Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc.
101	Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete. (b) Anglo Indian: (i) Plastic (hallow type) black
102	Renewing cast iron inspection door with bolts and nuts complete for fittings of 50 mm dia. to 150 mm dia. H.C.I. pipe.
103	Renewing polythene ball of approved quality for pipe of dia.: (i) 32 mm
104	Cleaning wash basin/ sink with acid.
105	Cleaning E.P. or Anglo-Indian W.C. with acid.
106	Subtotal
107	GST @ 18 %
108	Cess @ 1 %