Tender For Work Of Providing And Repairing Light Poles From High Tension Line To Police Station Bamanwas.
Tender Value
49.98 Lakhs
Estimated cost
Bid Submission
18 Sep 2023
0 days left
EMD
99980
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bamanwas → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Work Of Providing And Repairing Light Poles From High Tension Line To Police Station Bamanwas.
BOQ
| Sl. No. | Item Description |
| 1 | Supply and erection of Octagonal pole offollowing length and dimension as per table-3 with base plate on the cement concrete foundation of M-15 /M-20 grade (1:1.5:3) with the help of anchor bolts of grade 6.8 (IS 1367 P III ). The pole shall be made of S-355JO grade steel sheet , folded lengthwise to obtained Octagonal shape, having single longitudinal seam weld and hot dipped galvanised internally& externally in accordance with IS 2629. The pole shall have a weatherproof flush door and locking arrangements. The complete work shall be supervised and certified by the manufacturers for satisfactory supply, erection, esting and commissioning. 9 Mtr. |
| 2 | Supply, Erection and Fixing of hot dipped galvanised Overhang (60 X 3.25 mm) with cap (250 x 137.9 x 4.05 mm) over the existing poles Single arm overhang |
| 3 | Providing & Laying XLPE insulated & P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor 1554 P-1 / SI 7098 P- I of Group 1 of approved make in ground as per IS:1255 including excavation of 30cmx75cm sizetrench, 25 cm thick under layer of sand, second Class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size.16sqmm 4 core |
| 4 | P/ F IP-65/ IP-66 protected street light luminaries on existing bracket. Fixture made from powder coated single piece pressure die cast aluminum housing with heat dissipation fins on housing with high power LEDs . Diffuser / glass cover for ensuring IP-65 protection for lamp and control gear compartment, system lumen output of 100 lum/watt high power LED. Integrated driver shall be high efficiency having efficiency more than 85 % and in compliance to IEC standards. System life of 50000 burning hours with 70 % of initial lumens maintained. Fixture shall be in CE compliance. LED street light fixture 110-120 watt Group-1 |
| 5 | S & Laying following size earth wire/strip in horizontal or vertical run inround/surface/recess including riveting,soldering, saddles, making connection etc. as required. 6 SWG copper Wire |
| 6 | Providing & Laying XLPE insulated / P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor Unarmoured of IS:7098-I/1554-1 approved make in ground as per IS:1255 including excavation of 30cmx75cm sizetrench, 25 cm thick under layer of sand, second Class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required ofsize. 2.5 sqmm 2 core |
| 7 | P & F G.I. pipes (External work) with G.I. fittings including (IS:1239 Mark) including trenching and refilling earth etc. 25 mm dia nominal bore B class |
| 8 | P&F 240/415 V MCB of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/conforming to IEC 60898 in existing board/sheets including making connections with lugs, testing etc. as required 6 A to 32 A rating |
| 9 | Suitable contactor,locking arrangement for MCB,15kw cableload glands,(three terminal phase) block including and locingarrangement |
| 10 | Dismantling of existing structures like culverts, bridges, retaining walls, CC road and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 50 metres as directed by Engineer. Cement Concrete Grade M- 15 and above and PCC blocks |
| 11 | Providing and laying un-reinforced, dowel jointed, plain cement concrete mix With Concrete Mixer & vibrator pavement over a prepared sub base with 43 grade cement , coarse and fine aggregate conforming to IS: 383, maximum size of coarse aggregate not exceeding 25 mm, mixed as perapproved mix design, laid, spread, compacted and finished in a continuous peration including provision of contraction, expansion, construction and longitudinaljoints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, admixtures (if required) as approved, curing compound, finishing to lines and grades complete as per drawing and as per clause 602, 112 of MoRT&H specification including all material, labour, machinery, lighting, guarding and maintenance of diversion.PCC M-20 |
| 12 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths full round HDPE DWC (double wall corrugated) pipes of SN8 grade as per IS 16098 (Part 2)amended upto date in trenches in complete including all material, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications, drawingsand as per direction of Engineer. 75 mm ID |
| 13 | Maintenance free gel earthing with pipe in pipe /Strip in Pipe technology filled with anti corrosive conductive compound (CPRI tested) below the ground in 150 -200 mm dia earth pit and surrounding filled with required mineral filling compound (MFC should have hygroscopic proper ty to retain the moisture for long time to create low resistance Zone) and C.C. finished chamber covered with hinge type with locking arrangement C.I cover. C.I. frame of size 300mm x300mm complete testing of earth resistance as required of following sizes With pipe in pipe technology(inner pipe dia / outer pipe dia) 80 -100 micron G.I. coating |
AI Tender Summary
Tender Timeline
Sep 09, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedSep 18, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 18, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender