Chaudhary Charan Singh University has published Tender For Vitrified Tile Flooring, Extension Of Car Shed And Other Allied Work In Resi. No- C-1, C-7 And C-15 At University Campus.. Submission Date for this Tender is 30-09-2023. Tile Flooring Tenders in meerut Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Dismantling cement concrete or brick or granolithic floors including base concrete and including stacking of dismantled materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet).C-7 |
| 2 | Excavation in foundation in ordinary soil (loam clay or sand) including lift upto (1.50 meter.) & lead upto30 M.(100 ft.) and including filling, watering, ramming of excavated earth into the trenches or into space between the building & the sides of foundation trenches or into the plinth and removal and disposal or surplus earth as directed by the Engineer-in-charge upto a distance of 30 M. (100 ft.) from the foundation trenches. C-7 |
| 3 | Cement concrete with 2 cm. gauge stone grit instead of 4 cm gauge approved stone ballast, coarse sand & cement in the proportion of 3:1:5:1 including all labour, material and T&P. etc. required for proper completion of work.C-7 |
| 4 | S/F. 10 mm. thick vitrified tile size 24”x24” premier quality flooring or in skirting or dado laid with pidilite chemical finished with white cement & colour jointing and polishing including supply of all materials, labour, tools & plants etc. required for proper completion of the work. (C-1, C-7 & C-15) |
| 5 | 4cm.(1½”) thick 1:2:4 plain cement concrete floor with cement approved coarse sand and 2 Cm. (1”)graded approved stone grit laid in panelsfinished with 3 mm.(1/8”) floating coat of neat cement and marble dust in ratio 5:1 as specified over and including 8 Cm. (3”) thick base concrete consisting of cement, fine sand of 1.25 finess modulas & brick ballast 4 Cm. (1½) gauge in theproportion of 1:4:8 & removing any over lapping mortar at the joints or the panels if any and giving them a uniform finish, including supply of all materials, labour, tools & plants etc. required for proper completion of the work. C-7 |
| 6 | Providing and fixing glass trip of 3.5mm depth and of 5mm thickness in joints of floor and skirting at the time of laying labour, tools & plants etc required for proper completion of the work. C-7 |
| 7 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per direction of the Engineeri-in-charge. (C-1, C-7 & C-15) |
| 8 | Dismantling of old skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. (C-1, C-7 & C-15) |
| 9 | Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated "J" or "L" hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 12.47.2 2 mm thick flat. (C-7 & C-15) |
| 10 | Mild steel of iron work in purlins and rafters including drilling holes and fixing in position and including supply of all steel and bolts and nuts, wastage, labour and tools and plant etc. required for proper completion of work (No material shall be issued by deptt.)(C-7 & C-15) |
| 11 | Removing of Old PVC sheet including supply of all materials, labour, tools & plants etc. required for proper completion of the work. |
| 12 | Two coatenamel painting or varnishing sand papering and smooth surface by putty including supply of all materials, labour, tools & plants etc. required for proper completion of the work. |
| 13 | 12 mm. (1/2”)thick plaster with cement & fine sand of 1.25 finenss modules in 1:3 over brick work minimum thickness not to be less than 1cm. including supply of all materials, labour, tools & plants etc. required for proper completion of the work |
| 14 | Scraping old white of colour wash including disposal of refuse as directd by the Engineer-in-charge within a distance of 60 metre (200feet)(C-1 & C-15) |
| 15 | One coat cement primer old/new surface including all material, labour tools & plants etc. required for proper completion of the work.(C-1 & C-15) |
| 16 | Providing wall putty on old surface with approval quality material of berger/J.K. Birla or similar make 2 coats including supply of all materials, labour, tools & plants etc. required for proper completion of the work.(C-1 & C-15) |
| 17 | Finishing wall with two coats of oil bond distemper including sand apering papering, priming & smooth finish by putty including supply of all materials, labour, tools & plants etc. required for proper completion of the work.(C-1 & C-15) |
| 18 | GST |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
