Tender For Provn Of 132 X Boundary Pillars, 01 X Santary Post, 05 X Climate Control Devices And Chain Link Fence At Along Mil Stn Under Ge 872 Ews
Tender Value
20.20 Lakhs
Estimated cost
Bid Submission
14 Oct 2023
0 days left
EMD
40400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
West Siang → Arunachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Provn Of 132 X Boundary Pillars, 01 X Santary Post, 05 X Climate Control Devices And Chain Link Fence At Along Mil Stn Under Ge 872 Ews
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 02-Oct-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 09-Oct-2023 |
| 2 | 09-Oct-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 14-Oct-2023 |
BOQ
| Sl. No. | Item Description |
| 1 | SCHEDULE \"A\" PART - I [B/R WORKS] |
| 2 | Excavation in Trenches not exc. 1.50 Metre Wide and not exc. 1.50 Metre in Depth for Foundation etc. or for Shafts, Wells, Cess Pits, Manholes, Pier Holes, etc. not exc. 10 Sqm on Plan and not exc. 1.50 Metre in depth and getting out as in Soft/ Loose Soil, complete all as specified and as directed. |
| 3 | Excavating in Post Holes (or Similar Holes) in Soft/Loose Soil, each not exc. 0.50 CUM, getting out and removing surplus Soil to a distance not exc. 50.00 Metre and Making Good Surfaces, complete all as specified and as directed. |
| 4 | Excavating in Post Hole (or Similar Hole) in Soft/Loose Soil, Each Post Hole not exc. 0.50 CUM, getting out, Returning, Filling in and Ramming Earth or Broken Rubble mixed with Earth around in layers not exc. 25 Cm, Watering and Removing Surplus Soil to a distance not exc. 50.00 Metre and Making Good Surfaces, complete all as specified and as directed. |
| 5 | Returning, Filling in including Spreading, Levelling, Watering and Well Ramming in layers not exc. 25 Cm, in Soft/Loose Soil, complete all as specified and as directed. |
| 6 | Labour for Spreading and Levelling of soil otained from Excavation in layer n.exc. 25 cm thick including Well Ramming and watering as reuired complete all as specified and as directed. |
| 7 | Removing Excavated Materials (Soils), exc. 50.00 Metre and depositing where directed at a level not exc. 1.50 Metre above the Starting Point, complete all as specified and as directed. |
| 8 | M&L Cement Concrete 1:4:8 (40mm graded stone aggregate) in Foundation, Filling and Mass Concrete, etc. including necessary Formwork, complete all as specified and as directed.NOTE : Cost of Formwork will deem to be included in the Quoted Unit Rate. |
| 9 | M&L Reinforced Cement Concrete 1:2:4 (20mm graded stone aggregate) in Foundation including Rafts, Footing, Foundation Beams for Column Basement Slab, under reamed Piles, complete all as specified and as directed.NOTE : Reinforcement & Formwork will be Measured and Paid for separately under appropriate Items. |
| 10 | M&L Reinforced Cement Concrete 1:2:4 (20mm graded stone aggregate) in Columns, Pillars, Piers, Posts and Struts and the like, complete all as specified and as directed.NOTE : Reinforcement & Formwork will be Measured and Paid for separately under appropriate Items. |
| 11 | M&L Reinforced Cement Concrete 1:2:4 (20mm graded stone aggregates) in Chajjas and the like, complete all as specified and as directed.NOTE : Reinforcement & Formwork will be Measured & Paid for separately under appropriate Items. |
| 12 | M&L Formwork to Sides of Concrete Foundations, Footings, Bases of Columns, Raft and Raft Beams, Sides and Soffits (if any) of Foundation and Plinth Beams; and Similar Work; Vertical or to Batter, Flat, Rough Finished Surfaces of Concrete, complete all as specified and as directed. |
| 13 | M&L Formwork to Sides of Pillars, Posts, Struts, Piers, Columns and Stanchions, Flat, Fair Finished Surfaces of Concrete, complete all as specified and as directed. |
| 14 | M&L Formwork to Soffits of Chullah Hoods, Chajjas, Troughs and Similar Items including Edge, Rough Finished Surfaces of Concrete Flat, complete all as specified and as directed. |
| 15 | M&L Machine Made & Pressed Pre-cast Cement Concrete Block Masonry with Solid Blocks 300x200x200mm or 300x200x100mm in Sizes, having Compressive Strength of not less than 100 Kg/ Sq Cm (as per IS-2185) in Cement Concrete 1:3:6 (20mm graded stone aggregate), exc. 10 Cm in width and setting in Cement Mortar 1:6, complete all as specified and as directed. |
| 16 | M&L Cement Concrete 1:2:4 (12.5mm graded stone aggregate) 40mm thick in Damp Proof Courses to Horizontal or Vertical Surfaces including Use & Waste of Formwork and Applying Evenly a coat of Blown type Bitumen @ 1.50 KG/SQM and blinding with Clean Dry Sand @ 0.05 CUM/SQM, complete all as specified and as directed. |
| 17 | M&L TMT Bars 10mm dia and Over, Cut to length, Bent to Shape required including Cranking, Bending Spirally for Hooping for Columns, hooking Ends and Binding with and including Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed. |
| 18 | M&L TMT Bars 8.0mm dia in Stirrups, Spacers and Binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed. |
| 19 | M&L Mild Steel Round Bars 10mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for Columns, hooking Ends and binding with and including Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed. |
| 20 | M&L Mild Steel Works such as Posts and Struts in Fencing including cutting Tops to shape as directed, drilling holes, notching for Wire, etc.; including all necessary drilling, bolting or riveting, etc. and similar Work, conforming to Fe-290, Gde-E-165, complete all as specified and as directed. |
| 21 | M&L Framed Work as in Doors or Gates of Angle or Other Section with Gusset Plates, Rails, Braces, etc., complete, drilled for fixing of Steel Sheeting or Other Covering. Doors, etc. to be prepared for Hanging or Sliding with and including either Hooks and Hinges or Steel Hanging Door Fittings (exclusive of Steel Sheeting or Other Covering, Running Rails and Guides) and Hanging; also Fastening and fixing, conforming to Fe-410-W (Gde E-250) Quality A, complete all as specified and as directed. |
| 22 | M&L Mild Steel Screw Bolts (machine made) 11mm to 15mm diameter of Neck and length of Bolt exc. 5.0 Cm and not exc. 10 Cm with Hexagonal or Square Heads at One End and screwed the Other End, or screwed Both Ends, Each screwed End to be fitted with Washers and One Hexagonal or Square Nut, complete all as specified and as directed. |
| 23 | Supply only Chain Link Fencing 100mmx100mm or 75mmx75mm mesh with 3.15mm/4.0mm dia Mild Steel Galvanised Wire (as ordered), complete all as specified and as directed. |
| 24 | Fixing only Chain Link Fencing including Line Wires, any mesh, size and type to any type of Standards, Rails, Straining Bolts, etc. including Provission of Mild Steel Bind-ing Wire (annealed) not less than 0.90mm dia, complete all as specified and as directed. |
| 25 | S&F Galvanised 2 Strand, Steel Barbed Wire 2.24mm dia barbed with 2mm dia Barbs at 75mm spacings and straining and fixing to any type of Standard Rails straining Bolts, including securing or tying at crossings with and provision of Galvanised Mild Steel Wire, Staples or Steel Pins, etc., complete all as specified and as directed.NOTE : Each Line of Barbed Wire will be Measured for Payment. |
| 26 | M&L Mild Steel Tubular Trusses including Special Shaped Washers, etc. complete using ERW or Induction Butt welded Tubes, confirming to IS:1161-1979, Grade St-240, complete all as specified and as directed. |
| 27 | S&F Pre-painted Galvalume Aluminum Zinc Coating GI based Corrugated Steel Sheet 0.50mm thick Coloured, having Tensile Strength of 550 Mpa in Roof Covering, Cladding to Walls, fixed with Aluminum Self Tapping Screws and Aluminum Washers of suitable Size, complete all as specified and as directed. |
| 28 | S&F Pre-painted Galvalume Aluminum Zinc Coating GI based Plain Steel Sheet 0.50mm thick Coloured, having Tensile Strength of 550 Mpa in Ridges/Roof Covering, Cladding to Walls, fixed with Aluminum Self Tapping Screws and Aluminum Washers of suitable Size, complete all as specified and as directed. |
| 29 | M&L Cement Concrete 1:4:8 (40mm graded stone aggregate) 75mm thick in Sub-base to Floor, etc., complete all as specified and as directed. |
| 30 | M&L Cement Concrete 1:2:4 (12.5mm graded stone aggregate) 25mm thick in Sub-base for laying of Tiles, etc. including maintaining Level Uniformly, finished Concrete Surfaces Fair and Even, complete all as specified and as directed. |
| 31 | M&L Non-Skid Ceramic Coloured Tiles 7.0mm to 8.0mm thick (Square/ Rectangular), Area of Each Tile exc. 0.11 Sqm but not exc. 0.18 Sqm (1st quality and/ or as approved) in Floors, Jointed in Neat Cement Slurry and Pointed in Coloured Cement to match the Tile, laid over and including Screed or Screed Bed 15mm thick in Cement Mortar 1:6, complete all as specified and as directed.NOTE : Cost of Screed Bed will deemed to be included in the Quoted Unit Rate. |
| 32 | M&L Cement Concrete 1:3:6 (40mm graded stone aggregates) 75mm thick in Plinth Protection, etc, Laid in Alternate Panels, finished Concrete Surfaces Even and Smoooth without Using Extra Cement, complete all as specified and as directed. |
| 33 | M&L Rendering in ceiling, 5mm thick in Cement Mortar 1:3 on Brick/ PCC Blocks or Concrete Works, finished Plastered Surfaces Even and Smooth without using Extra Cement, complete all as specified and as directed. |
| 34 | M&L Rendering (Internal) 15mm thick in Cement Mortar 1:4 on Brick/ PCC Blocks or Concrete Works, finished Plastered Surfaces Fair and Even without using Extra Cement, complete all as specified and as directed. |
| 35 | M&L Rendering (Internal) 15mm thick in Cement Mortar 1:6 on Brick/ PCC Blocks or Concrete Works, finished Plastered Surfaces Even and Smooth without using Extra Cement, complete all as specified and as directed. |
| 36 | M&L Rendering (External) 15mm thick on Bricks/Pre-cast Blocks or Concrete Works consisting in 2 layers, Backing/Under layer of 10mm thick in Cement Mortar 1:4 and Float/Top layer 5.0mm thick in Cement Mortar 1:4 including mixing WPC to Float/ Top layer, finished Fair and Even, complete all as specified and as directed.NOTE : Water Proofing Compound (WPC) will be Measured & Paid separately under appropriate Item. |
| 37 | Supply only Water Proofing Compound (as approved), conforming to IS:2645-2003, complete all as specified and as directed. |
| 38 | M&L Preparing Newly Plastered Surfaces of Walls and applying Three Coats of White Wash, complete all as specified and as directed. |
| 39 | M&L Preparing New Plastered Surfaces of Walls and applying Wall Care Putty 1.5mm thick on Plastered Surfaces of Walls including Cutting and Rubbing down to obtain an Even and Smooth Surface, complete all as specified and as directed. |
| 40 | M&L Preparing New Plastered Surfaces of Walls and applying Applying Two Coats of Distemper Oil Emulsion (as approved) over a Coat of Chalk Whitening, (Priming Coat) complete all as specified and as directed. |
| 41 | M&L Preparing Newly Plastered Surfaces of Walls and applying Two Coats of Cement Based Paint (of approved Tint) over a Coat of Alkali Resistant Priming Paint, complete all as specified and as directed. |
| 42 | M&L Preparing Steel and Iron Surfaces of any descriptions, exc. 10 Cm in Width or Girth and applying Two Coats of Synthetic Enamel Paint (1st quality/grade Paint of approved Tint) over a Coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed. |
| 43 | M&L Preparing New Steel and Iron Surfaces of any description, not exc. 10 Cm in Width or Girth, not otherwise described and applying Two Coats of Synthetic Enamel Paint (1st Grade/ Quality) over a Coat of Red Oxide Zinc Chrome Primer complete all as specified and as directed. |
| 44 | M&L Writing letters or figures (Block,Roman, Italic or Indian) n exc. 30 cm high using Synthetic Enamel Paint (1st quality/ grade Paint of approved Tint), complete all as specified and as directed. Note:- Letters etc., shall be painted with thick paint, so that they stand out boldly and solidly without showing signs of brush marks, if necessary, they shall be repainted until the desired result is obtained. |
| 45 | M&L Providing Number Plate of size 200x200x10mm in CM 1:4 and writing pillar number (Height of letter shall be 15 to 20cm) with Luminous Paint of approved Tint by cutting grove of Size 10x10mm in Number Plate complete all as specified and directed |
| 46 | SUB TOTAL OF SCHEDULE \"A\" Part - I |
| 47 | SCHEDULE \"A\" PART - II [E/M SERVICES] |
| 48 | M&L Point Wiring with 4.00 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH Multi-stranded Single Core Copper Conductor Cable with 4.00 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH Multi-stranded Single Core Copper Conductor Cable (Green colour) as Earth Continuity Wire, drawn in SURFACE/ CONCEALED PVC Conduit, heavey duty (HMS grade) of suitable Dia/ Size alongwith all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddle, etc. complete with GI Terminal Box not less than 1.5mm thick, fixing Flush to Wall Surfaces, covered with 3.0mm thick Plastic laminated Sheet Cover and/or Modular Plates of suitable Size for mounting Switches, Sockets, Fan Regulators, etc., Earth Continuity Wire connected to Common Earth dolly for ONE 16 AMP, 3 PIN SOCKET OUTLET on INDEPENDENT BOARD, complete all as specified and as directed. |
| 49 | S&F Sheet Metal Enclosure, Single Pole & Neutral, 2 Pin & Earth Plug Top and Socket 20 Amp rating with and including 1 No. MCB 20 Amp, Single Pole and Connecting up, complete all as specified and as directed. |
| 50 | Supply, Installation & Commissioning Hi Wall Split Air Conditioner 1.5 TR Capacity with Indoor/ Outdoor Units including Cordless Remote Control Unit and in-bulit Air Ioniser and Plasma Filtter for better Indoor Air quality, having Minimum 5 Star rated and EER 3.2, Providing Electric Connection, complete all as specified and as directed. |
| 51 | Supply & Installation Voltage Stabilizer 5.0 KVA Capacity, suitable for Automatic Operation, Single Phase, Naturally Air Cooled, Indoor type and Designed for Input Variation between 170 Volt to 250 Volt with Output Voltage stabilized at 230 Volt with accuracy of +2.5%, complete all as specified and as directed. |
| 52 | SUB TOTAL OF SCHEDULE \"A\" Part - II |
| 53 | Total Amount in Figures |
| 54 | Quoted Amount in Words |
AI Tender Summary
Tender Timeline
Oct 09, 2023
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 09, 2023
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Oct 14, 2023
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedOct 14, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 16, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender