Name of Work: < Supply of Spares for Bottom Ash Hopper >
Sl. No.
Item Description
1
Sprocket driven 42 teeth (2\"\"X3\"\") MOC-Cast steel as per IS 2708, Gr. 3
2
Sprocket driven 12 teeth Cast steel as per IS 2708, Gr. 3
3
Driving Gear (1set of 02 Nos.) MOC-CI IS 210 Gr. FG 200
4
Chain (01 set consisting of 02 chains of 03 Mtr. Length each) MOC-Carbon steel As per sample
5
Clinker grinder-driving shaft assembly with Grinding Roll, A553-302 & 553-015 MOC grinding roll -MN steel as per IS 276 grade-3 shaft -EN-8 (As per sample)
6
Clinker grinder-Driven shaft assembly with Grinding Roll, A553-303 & 553-015 MOC grinding roll -MN steel as per IS 276 grade-3 shaft -EN-8 (As per sample)
7
Shaft sleeve MOC-SS 410 hardened (As per sample)
8
Wear ring MOC-SS 410/416 hardened (As per sample)
9
Bearing support CI -IS 210 Gr. FG -200 (As per sample)
10
Hydroejector assy complete with 8\"\" discharge Hydroejector with 8\"\" discharge nozzle size; 1/3/8\"\" Input water Pr. 6-7 Kg/cm2 flow of water 118.2M3/Hr. Guaranteed capacity (Dry ash) 90 TPH (As per sample)
11
Gland half (01 set=02 nos.) MOC CI IS 210 Gr FG 0200 (As per sample)
12
Clinker grinder gear box (As per sample)
13
Wear plate part no. 552-014 MOC-ACI 500 BHN(01 set=02 nos.) As per sample
14
Split lantern ring (01 set=03 segments) MOC bronze Dimensions; (As per sample)
15
Bearing housing (complete assy. With bearing and adoptor sleeve SKF/Timken/FAG/NSK/NBC make ) expansion side IEH 22317 CK (As per sample
16
Bearing housing (complete assy. With bearing and adoptorsleev SKF/Timken/FAG/NSK/NBC make ) non expansion side IH 22317 CK (As per sample
17
Roller wedge MOC-SS 316) part no. 547-012
18
Roller wedge (MOC SS-316) part no-547-012-01
19
Roller wedge MOC-SS 316 part no- 547-012-02
20
Double acting pneumatic cylinder for bottom ash hopper complete Assy. With SS 304 cylinder barrel with hard chrome plated inside size;350 NB boreX1045MM stroke top & bottom flange i.e. 475 MM Sq. piston rd dia; 57 MM flange mounting dimensions i.e 4 holes of dia 26 mm having 420 MM spacing , working pressure; 10KG/Sq. CM
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
