Uttar Pradesh State Sugar Corporation Limited has published Tender For Roofing, Side Cladding, Structural Work And General Repairing Of T.G. Building, Including Construction Of Boundry Wall. Submission Date for this Tender is 14-09-2023. Wall Construction Tenders in meerut Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 12-Sep-2023 | DATE EXTEND | Date | 14-09-2023 |
| Sl. No. | Item Description |
| 1 | Cement Concrete with 4 CM gauge approved stone ballast,coarse sand & cement in the proportion of 8:4:1 including supply of all materials.labour. Tools & Plants etc. requiredfor proper completion of the work. |
| 2 | M-150 Brick Work in 1:3 ( One cement & three coarse sand ) mortar In super structure incliding nevessary cutting & moulding of bricks as required thickness of wall half bricks. Including supply of all material ,labour, T & P etc. required for proper completion of the work. |
| 3 | Supply and fixing 6 to 8 mm thick ivory or light shades vitrified tiles 600x600 mm size in flooring and skirting with 1:3 approved cement and coarse sand morter finished with in its cement color slurry,jointing and polished of approved quality complete, including supply of all materials,labour,tools and plants etc required for proper completion of the work as per the direction of enginee- in-charge. |
| 4 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer),of approved make in all colours shades except burgundy,bottle green, black of any size as approved by engineer-in-charge in skirting,risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 5 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. |
| 6 | Providing and fixing aluminium work for doors, windows, ventilatorsand partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Powder coated aluminium (minimum thickness of powder coating 50 micron |
| 7 | Providing and fixing aluminium work for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 8 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steelscrews etc. complete as per architectural drawings and directions of engineerin- charge. Pre-laminated particle board with decorative lamination on both sides |
| 9 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
| 10 | Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. |
| 11 | Providing and Fixing Aluminium Fittings s.a Handles, Tower Bolt, Sliding Bolt,Door stopper etc.of suitable size including cost of all materials.labour etc. Required for proper completion of the work. |
| 12 | (A) DOOR |
| 13 | (B) WINDOWS |
| 14 | 12.00 mm thick plaster with cement & coarsesandmortar in 1:4 proportion minimum thickness not to be less than 10 mm, I/C supply of all materials, labour, T&P etc. required for proper completion of the work. |
| 15 | Dismantling existing plaster including disposal of refuse as directed by the Engineer-In-Charge within a distance of 60 mtr. (200 feet) complete. |
| 16 | Finishing wall with water proofing cement paint of approved make and quality on on new work wih3 coatsto give an even shadeincluding supply of all materials, labour, T&P etc. required for proper completion of the work. (for all heights) |
| 17 | Distempering (first coat) with oil bound distemper of approved make and manufacture and of required shade on new wall surface to give an even shade over and including a priming coat with cement primer of approved brand and manufacture such as Berger,J&N,,Shalimar,Asian paint etc. and also a subsequent coat of distemper over previous coat after thoroughly brushing the surface free from mortar dropping and oter foreign matter and also including the surface even with plaster of paris or approved synthetic materials and sand papered smooth including supply of all materials,labour,T&P etc. required for proper completion of the work. |
| 18 | Providing and laying 25 mm thick kota stoneslab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab,including rubbing and polishing complete with base of cement mortar1:4 ( 1 cement ,4 coarse sand). |
| 19 | Dismentling of kota stone flooring including disposal of refuse as directed by the E/I within a distance of 60.00 mt. |
| 20 | supply and fixing of single skin colour coated Profile roof sheets of 1015 mm effective cover width and nominal 28.3 mm deep ribs with subtle square fluting in the five pan at nominal 203 mm centre to centre & also fixing the sheet with self driven/self tapping screws with use of drill machines.The feed material for sheet is manufactured out 0.45 mm.Base metal thickness,(0.50 mmTCT,coiour coating thickness is over and above the thickness stated above),Hi-Tensile steel with minimum 550 MPa yield strength metallic hot dip coated with zinc/Aluminium alloy (55% Aluminium, 45% zinc) as per IS 1397 Zincalume/Galvalume AZ 150 (Minimum 150 grams/sqm,total on both side) of steel. The paint shall have a total coating thickness of 35µm comprising, nominal 20 µm exterior coaton the top surface and nominal 5µm reverse coat on backsurface over nominal 5 µm primer coat on both sides of approved colour shade of the sheet .Therate to include cost of all materials, labour, T&P, Sundries, wastage etc. required for proper completion of work.(For all heights) |
| 21 | Providing and layingthe grouting of machine bed, bolts etc. With Forsoc conbextra GP2 grouting as per direction of E/I,including supply of all materials,labour,T&P ,shuttering materials etc. Required for proper completion of the work. For all heights. |
| 22 | Supply and fixing rolling shutters of approved make ,made with 80x125 mm cold rolled M.S. Iath inter locked throughout their entire length and joined together at the end by end locks and mounted on specially designed pipe shaft with brackets,side guides and arrangements for inside and outside locking with push and pull operation complete but excluding cost of top cover and springs and also proviging mechanical device chain and cranks operation for operating shutters. |
| 23 | Providing and fixing 27.5 cm. Long wire spring grade 2for rolling shutters. |
| 24 | Providing and laying top cover for rolling shutters 2.50 mt. Wide. |
| 25 | providing and fixing ball bearing for rolling shuttrs. |
| 26 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of0.30 mm thick(minimum) sheet to be interlocked at middle of the1200x600 mm panel to form grids of 600x600 mm and wall angle ofsize 24x24x0.3 mm and laying false ceiling tiles of approved texturein the grid including, required cutting/making, opening for serviceslike diffusers, grills, light fittings, fixtures, smoke detectors etc. Main"T" runners to be suspended from ceiling using GI slotted cleats ofsize 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50mm long dash fasteners, 4 mm GI adjustable rods with galvanisedbutterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mmcenter to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge with12.5 mm thick square edge PVC Laminated GypsumTile of size 595x595 mm, made of Gypsum plasterboard,manufactured from natural gypsum as per IS 2095 part Iand laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed withthe face side PVC film which goes around and wraps the edges and is bonded to the edges and the back sidemetalized polyester film so as to make the tile a completely sealed unit. |
| 27 | Supply and Fixing of the 10cm (4inch) internal diameter P.V.C. Pipe for sewer line Kisan /Supreme make complete with bends with door bendand plain bend, Socketsincluding Laying and supply of pipe etc. required for proper completion of the work and also including repair of plaster pointing etc. damaged during fixing of the pipes. |
| 28 | Providing & Fixing steel jali 100 mm dia,standard quality and make. |
| 29 | Extra for nosing in treads of step of kota stone. |
| 30 | Extra for kota stonein treads of steps and risers using single length up to 1.05 mtr. |
| 31 | Providing & Fixingof hydraulic door closer of approved make as per IS norms. |
| 32 | Providing and fixing raised access floor panel of 600x600x32 mm,medium grade filled steel anti static high pressure laminated of 800H grade ( FS800H ).Access floor panel shall be steel welded constructio with an enclosed bottom pan with uniform pattern of 64 hemispherical cones.the rate to include cost of all materials,labour,T&P , wastage etc.complete . |
| 33 | Providing and fixing double scaffolding system (cup lock type) on the exterior side of the building structure up to 25 metre height above ground level including additional rows of scaffolding in stepped manner as per requirement of site. Made with 40 mm dia M.S tube placed 1.5 metre centre to centre,horizontal & vertical tube joint with cup &lock system with M.S Tubes,M.S Tubes chalis,M.S Clamps and staircase system in the scaffolding for working plateform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and /or applying chemical and removing it thereafter.The scaffolding system shall be stiffened with bracings,runners connecting with the building etc.whereever required, if feasible for inspection of work at required locations with essential safety features for the workman etc. complete as per directions and approval of the Engineer-in-charge . |
| 34 | Shifting of malwa debris etc. From site by using buggi,tractor trolley etc.uo to a minimum1.00 km. From siteof work including loading ,unloading ,fuel, T&P ,etc. Complete |
| 35 | Structural steel work riveted,weided or bolted in built up sections,trusses and framed work including supply of all materials including cutting,wastage,hoisting,fixing in position and applying a priming coat of approved steel primer over all steel members complete.including supply of all materials ,labour ,T&P etc. required for proper completion of the work. |
| 36 | Excavation in foundation in ordinary soil , I/C lift up to 1.50 M and lead up to 30.00 Mtr. I/C filling watering and ramming of excavated earth in to the trenches or in to the space between the building and the sides of foundation trenches or in to the plinth I/C removal & disposal of surplus earth as directed by E/I up to a distance of 30 M |
| 37 | sand filling in plinth and under floor including supply of necessary quantity of sand from a distance not exceeding 8.00 km.From site of work and including watering ,dressing , T&P , labour etc.required for proper completion of work. |
| 38 | Cement Concrete with 4 CM gauge approved stone ballast,coarse sand & cement in the proportion of 8:4:1 including supply of all materials.labour. Tools & Plants etc. requiredfor proper completion of the work |
| 39 | RCC Work with cement , approved coarse sand & 2 cm gauge approved stone grit in proporttion of 1:1.5:3 in raft foundation & footing. excluding supply of reinforcement and its bending ,but inclouding its fixing and binding the the same with 24 B.W.G.G.T. binding wire and including necessary centering and shuttering etc.and supply of all materials.labour,Tools & Plants etc. required for proper completion of the work including cost of binding wire. The rate excluding making of drip course which shall be paid extra. |
| 40 | Same as item no. 4 above, but R.C.C in 1:1.5:3 in col. |
| 41 | M.S. or Iron work in plain work such as RCC/R.B. work I/C bending for proper shape and I/C supply of steel & its wastage, bendhooks and authorized over laping shall be measured and including cost of binding wire. |
| 42 | M-150 Brick Work in 1:3 ( One cement & three coarse sand ) mortar In foundation & Plinth. Including supply of all material ,labour, T & P etc. required for proper completion of the work. |
| 43 | M-150 Brick Work in 1:3 ( One cement & three coarse sand ) mortar In super structure incliding nevessary cutting & moulding of bricks as required thickness of wall not to be less than1½ bricks. Including supply of all material ,labour, T & P etc. required for proper completion of the work. |
| 44 | 12.00 mm thick plaster with cement & coarsesandmortar in 1:3 proportion minimum thickness not to be less than 10 mm, I/C supply of all materials, labour, T&P etc. required for proper completion of the work |
| 45 | Finishing wall with water proofing cement paint at approved make and quality on new work with 3 coat to give an even shade I/C supply of all materials, labour, T&P etc. required for proper completion of the work |
| 46 | Painting roofs or other iron work in large areawith one coat priming and two coat of approved paint I/C supply of all materials, labour, T&P etc. required for proper completion of work, paint used shouldbe ISI marked. |
| 47 | M.S or iron work in heavy sizes and section such as trusses, built up gates,record rack,roof work,gatesetc.,wrought to required form including supply of steel bolts,nuts ,wastage etc. And their fixing including rivetting, welding where necessary required for proper completion of the work. |
| 48 | Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by the Engineer-in -charge within a distance of 60 meter ( for all Heights) |
| 49 | Brick soling with straingth over burnt bricks laid on edge and dry with brick edging on both sides including preparation of subgrade to prescribed camber and including supply ofbricks, filling joints with local earth of P.I. 5 to 7, spreading blinding coat 1 cm (3/8") depth of local earth over the entire surface and including supply of all materials, labour tools and plants etc. required for proper completion of the work. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
