Tender For Supply Of Necessary T And P Equipment And Other Materials

Sharing tender

Supply Of Necessary T And P Equipment And Other Materials Supply Of Necessary T And P Equipment And Other Materials Under Etd-Ii, Gorakhpur , Supply Of Necessary T&P Equipment And Other Materials. , Primary Current Injection Loading Ct Set(Variac/Auto Transformer Inbuilt) (Re Make) Capacity-1.5Kva (Short Time) Input9240 V +-10% 50 Hz Ac Output Current-0-800 A Duty Cycle: 5 Mins, On - 15 Mins. Off Metering: 1) Digital Ammeter, 3.5 Dig., Digital Timer, 4 Digit Accuracy:+/-0.05% Protection: Mcbs. Cabinet: M.S. Powder Coated Measuring 500 Mm X 340 Mm X 250 Mm , Three Phase Electronic Reference Standard Energy Meter With Necessary Accessories (Accu Check) (Sands Tprs-1107A) Voltage Reference- For Ht 110V+30% (3P3w), For Ht 63.5V+30% (3P4w), For Lt 240V+30% Frequency- 50 Hz+ 5 % Power Factor- Zero Lag-Unity-Zero Lead Current Using Clamp On Ct (Ib)- 500 Ma To 300A(Ib) And 360A (Imax) With Clamp On Ct Primary To Achieve 0.2S Class Accuracy, 50 Ma To 5A(Ib) And 10A (Imax) With Clamp On Ct Secondary To Achieve 0.2S Class Accuracy. The Rsm Meter Shall Confirm In All Respects Including Performance And Testing To The Latest Relevant And Applicable Indian Standard I.E. Iec 687, Is 12346, Is: 13779/1999, Is: 14697/1999, Is:15707/2006 Rsm Shall Be Supplied Along With Following Accessories :- 1. Common Optical Sensor For Automatic Testing, Which Can Be Used To Sense Disc Revolutions In Electromechanical Meters As Well As Indicating Led’S In Static Meters 2. Mounting Arrangement (Clamp) For The Optical Sensor. 3. Set Of Primary Clamp On Ct (300A) For On-Line Testing. 4. Set Of Secondary Clamp On Ct (10A) For On-Line Testing 5. A Set Of Voltage Leads With Insulated Clips. 6. Optical Probe To Do The Dial Test For Dlms Meters. 7. Serial Communication Cord With Rs232/Usb Connector To Retrieve Stored Data From The Electronic Reference Standard Meter And Download The Same To Pc. 8. Snap Switch Along With Cable. 9. Base Computer Software ( Bcs ) , Cmri Machine Sands Make Dos Based Common Meter Reading Instrument Model 1010, Min Memory 8/16Gb With 15 Lines X 40 Characters-Graphical Display With Led Backlit Dlms Compliant And Following Accessories. A. Universal Optical Probe (To Read Iec 1107, Ansi & Pact Protocols) B. Rs232 Communication Cable C. Usb To Usb Cable For Pc D. Fast Charger E. User Manual And Cd F. Carry Case , Earth Resistance Tester Accessories-4 Set Test Kits (Leads), 2/4 Pieces Iron Rods, 6 Pieces Battery, Hard/Soft Carrying Case, Manual/Accuracy-3% Power Sourc - Aa/Aaa Battery Operated , Ashida Make (Aditya Series), Numerical Micro Controller Based 4 Pole, 3 O/C +1E/F, Idmt Protection Relay, Type: Adr 141A , 11 Kv 600-300/5 Amp. Substation C.T. (Accuracy Class 0.5S, Frequency 50 Hz Burden-15 Va Conforming To Is-2705/1992) Suitable For Stelmec Make Panels. , 11 Kv 400-200/5 Amp. Substation C.T. (Accuracy Class 0.5S, Frequency 50 Hz Burden-15 Va Conforming To Is-2705/1992) Suitable For Stelmec Make Panels. , 11 Kv 200-100/5 Amp. Substation C.T. (Accuracy Class 0.5S, Frequency 50 Hz Burden-15 Va Conforming To Is-2705/1992) Suitable For Stelmec Make Panels. , 11 Kv 200-100/5 Amp. Substation C.T. (Accuracy Class 0.5S, Frequency 50 Hz Burden-15 Va Conforming To Is-2705/1992) Suitable For Megawin Make Panels. , 11 Kv 200-100/5 Amp. Substation C.T. (Accuracy Class 0.5S, Frequency 50 Hz Burden-15 Va Conforming To Is-2705/1992) Suitable For Pascal Make Panels. , 11 Kv 200-100/5 Amp. Substation C.T. (Accuracy Class 0.5S, Frequency 50 Hz Burden-15 Va Conforming To Is-2705/1992) Suitable For Cromption Greaves Make Panels.