Rajasthan State Warehousing Corporation-RSWC has published Tender For Repair And Water Proofing Treatment Of Roof, Renovation Of Toilet And Electrification Work At Rswc Head Office, Jaipur, Rajasthan. Submission Date for this Tender is 18-09-2023. Electrification Work Tenders in Jaipur Rajasthan. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Repair & Water Proofing Treatment Of Roof |
2 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge. 1: 3: 6 or richer mix. |
3 | Providing and laying in position Ready mix concrete manufactured in fullyautomatic Batching Plant and transportedtositein transitmixerforhavingcontinous agitated mixer, manufactured as per approved mix design of specified grade of RCC work including pumping of R.M.C. from transit mixer to site of laying , exculding the cost of centering, shuttering and reinforcement with all lead and lift including cost of admixtures in recommended portion as per IS 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer in charge. All works upto floor V floor M20gradeDesignMixbyusingcement aspercodal provision.Add extra for providing richer mixes respectively at all floor levels Providing M-25 grade concrete by usingcement as per codal provision instead ofM-20 grade design mix |
4 | CARRIAGE OF MATERIALS Building Rubbish Stone metal (Grit and ballast etc.) for 20KM |
5 | Supply of Expoxy harder and resin |
6 | Repair to damaged RCC slabs, beams and columns etc for strengthening with cement mortar 1 : 2 in following steps :- (i)Choping losse and cracked concrete to required depth, cleaning the exposed surface of steel and concrete with wire brush and sand papering , cleaning of concrete surface with water as necessary and getting dried. (ii) Applying Epoxy primer on the exposed steel bars. (iii) ApplyingEpoxyhardenerandresinmix(asper manufectured"s specification) on concrete and steel bars with brush. (iv) Speading dry cement mortar 1 : 2 mix over epoxy treated wet surface and allow it to dry for one day. (v) Plastering the surfacewith cementsand mortar1 :3 upto depth of 30mm complete. (vi) Cure the plastered surface for 15 days, All work including scaffolding etc. complete in all respect. |
7 | Renovation of Toilet |
8 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge 1: 3: 6 or richer mix. |
9 | Dismantling doors, windows and clearstory windows steel or wood shutter including chowkhats and holdfasts etc. complete and stacking within 50 meters lead:Of area exceeding 3 square meter |
10 | Dismantling tile work in floors and roofs laid in cement mortarincludingstackingofserviceablematerial and disposal ofunserviceable material within 50 meter lead: For thickness of tiles 10mm to 25mm |
11 | DismantlingCIorasbestosrainwaterpipewithfitting andclamps including stacking within 50 meter lead:100mm dia pipe. |
12 | DismantlingGIpipes(externalwork)includingexcavation and refilling trenches after taking out the pipes and including stacking of pipes within 50 meter lead: 15mm to 40mm nominal bore |
13 | DismantlingCIpipes includingexcavation andrefilling trenchesaftertakingoutthepipes,breakingleadcaulked joints,meltingofleadandmakingintoblock, includingstacking of pipes lead at site within 50 meter, of dia:Up to 150mm dia |
14 | Dismantlingoldplasterorskirting,rakingoutjointsand cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. |
15 | Making of hole (width up to 150 mm) in R.C.C. slab/wall/beams by power driven drilling machine complete as per direction of EI upto 150mm thick |
16 | Labour charges for removing W.C. pan (any type) of all sizes with care including all necessary fittings P or S trap. |
17 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot &coldwatersupplyincludingallCPVCplain&brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,) 20mm nominal size |
18 | 20mm nominal size |
19 | 25mm nominal size |
20 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot &coldwatersupplyincludingallCPVCplain&brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement , trenching refilling & testing of joints complete as per direction of Engineer in Charge. (External work). |
21 | 20mm nominal size |
22 | 25mm nominal size |
23 | 32mm nominal size |
24 | Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). |
25 | Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirmingto IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). |
26 | Construction of chamber in all type of soil with 230 mm thick brick masonry in CM 1:6 m 10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 40mm thick M-15 grade C.C. flooring, earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr. -do- size 450 x 450mm depth upto0.5 M,Cement concrete cover with frame. |
27 | Construction of chamber in all type of soil with 230 mm thick brick masonry in CM 1:6 m 10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 40mm thick M-15 grade C.C. flooring, earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr. -do- size 450 x 450mm depth upto0.5 M,Cement concrete cover with frame.Inside size 300 X 300 mm depth upto 0.5 M,Cement concrete cover with frame. |
28 | P & F Europeantypewhite glazed vitreous china 1stquality W.C. (IS : 2556 Mark) including cutting and making good the wall and floor Wall Mounting (syphonic) |
29 | P & F water closet Seat Covers with brass hinges completeSolid PVC (IS 2548 marked) grade-I Black for EWCColoured. |
30 | P&F C.P. lugs for toilet seat cover. |
31 | P & F Jet spray for water closet with C.P. Copper Tube flange of approved make. |
32 | P&FWVCWashbasin(IstqualityIS:2556Mark)of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make, P.V.C Waste pipe with PVC nut 32 mm complete including cutting & making good the wall : Size 630 mm x 500 mm dia for counter top |
33 | P&FBibCock(IS:8931Mark),Superiorqualityof approved make:C.P. Brass bib cock,15mm nominal boreLong nose, 15mm nominal bore weight not less than 810 gm |
34 | P & F Stop Cock(IS :8931 Mark),superior quality & of approved make:C.P. Brass 15mm nominal boreConcealed Stop Cock 15mm |
35 | P&F Full way valve (IS:778 Mark) or wheel valve of approved make. ) Gun metal 15 mm nominal bore. |
36 | P&F Full way valve (IS:778 Mark) or wheel valve of approved make. )Gun metal 25 mm nominal bore. |
37 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /makeincluding joining the pipe with solvent cement rubber ring and lubricant. 75 mm dia |
38 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /makeincluding joining the pipe with solvent cement rubber ring and lubricant. 110 mm dia |
39 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC)SWRPipesTypeBforscilandwastedischarge system (IS:13592 : 1992 Marked) of approved quality /make 75 mm dia |
40 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC)SWRPipesTypeBforscilandwastedischarge system (IS:13592 : 1992 Marked) of approved quality /make 110 mm dia |
41 | ProvidingandFixingUnplasticizedPolyVinylChloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make Single Tee with Door 110mm dia |
42 | ProvidingandFixingUnplasticizedPolyVinylChloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make Multi floor trap 110 mm dia |
43 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant:Bend 87.5 75 mm dia. |
44 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant:Door Bend Left & Right110 mm dia. |
45 | P & F lst quality WVC Urinal (IS:2556 mark) with 25mm diaG.I. waste pipe, dome waste couplings, concealed iron brackets or screws etc completeFlat Back (large) or half stall size 610x400x80mm |
46 | P&FC.P.brassUrinalFlushPipeset complete with flanged brackets of approved make.For 3 Urinals |
47 | P&FC.P.brassUrinalFlushPipeset complete with flanged brackets of approved makeFor 1 Urinal |
48 | Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. South (Red/Cholate Colour) Up to 1500 Cm2 Tiles |
49 | P&F Looking Mirror 5mm thick of approved make with ornamental frame size 50x12 with 6mm Ply Board on Back Side Complete as per approved sample |
50 | P & F Toilet Paper Holderwith rod of approved quality/make: C.P. brass heavy & Superior quality. |
51 | P&FLiquidSoapContainerwithbracketscompleteof approved make: C.P. brass |
52 | Providing and fixingSuperior quality CP Brassfittings of approved make as per direction of Engineer-in-charge |
53 | Swan neck pillar cock 15 mm nominal size |
54 | Two way Bib Cock 15 mm nominal size |
55 | Singleleverwashbasinmixerwith450mmlongcopper connection pipe |
56 | Wall mixer 3 in 1 system with provision of tetephonic bath shower with bend pipe |
57 | 600 mm long towel rail |
58 | Revolving type towel ring |
59 | Soap dish |
60 | 190 mm rain shower |
61 | Paper holder |
62 | Jet Spray(Premium heavy Quality) as approved by Engineer- in-Charge |
63 | Providing & Fixing chair for wall hung W.C. |
64 | Providing&FixingPremiumqualityBottletrapinternal portion 32mm, size 250mm long wall connection pipe & wall flangeas per approved by Engineer in Charge. |
65 | Supply of Hydraulic Seat Cover for Europeon WC of superior quality approved make in white Colour |
66 | Providing & Fixing Concealed cistern with Floor mounting frame and flush plate of superior quality and approved sample by Engineer-in-charge. |
67 | Providing and fixing of uPVC casement fixed windows or ventilators manufacturedinISO9001:2000&14001:2004certifiedcompany. Frame : Made from the Extruded uPVC Window Profile Section of size 60 x 60mm having outer wall thickness of 2.25mm (+/- 0.2mm) and 3 box multi-chamber construction, White in finish, duly reinforced with 1.2mm thick G/J/U/O TYPE GI section. All the four corners shall be mitered cut & thermal welded so as to form window frame. Frame shall be milled with drain and air equalizer hole in order to be water tight and for drainage of accumulated water, if any, to outer side. Fix Mullion made of 76 x 60mm uPVC Profile Section with steel reinforcement shall be provided in windows as per the requirement. Frame shall have „O? type EPDM gasket fitted in in-built groove of frame profile for proper air & sound insulation of the shutter. Glazing bead of size 34 x 20mm with „K? & „O? type inner and outer EPDM weather seal gaskets alongwith 5mm thick ISI makeplainfloatglass.Allwelding jointsofframeand shutter shall be cleaned and milled with the CNC mechanism to provide uniform grooved finish on all visible joints. Hardware : Installation at Site : Complete window is to be installed on site with 10 x 100mm fastners with white cap in existing pre-finished wall cut-out cemented to glass level plane at all height & width and silicon glue is applied to fill up the crevices between wall and window frame. Complete in all respect as per the drawing and specifications and direction of engineer-in-charge. |
68 | Electrification |
69 | Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm. nominal size FR PVC insulated unsheathed flexible copperconductor 1.1 KV grade and 1.5 sq. mm. nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 KV grade(IS : 694) ofapproved make on surface ISI marked(IS-19427-P-II) PVCcasing capping and its accessories, round tiles, 18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board & false ceiling point 6 A switch, 3.0 mm. thick ISI marked phenolic laminated sheet, zinc plated/brass screw, cup washers, making connections, testing etc. as required. Short point (upto 3mtr.) Group-2 |
70 | (a) Short Point (upto 3 mtr.) |
71 | (b) Medium Point (upto 6 mtr.) |
72 | (c) Long Point (upto 10 mtr.) |
73 | Wiring for 3 pin 5 amp light plug point with 1.5 sqmm. nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 KV grade and 1.5 Sq. mm. nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 KV grade (IS:694) of approved make in surface/recessed ISI marked medium duty PVC conduit and it"s accessories, 18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in swith board & falce ceiling point, 6 A swith, 6 A socket, 3.0 mm thick phenolic laminated sheet, zinc plated/ brass screws, cup washers, making connections, testing etc. as required on board. Grade-II. |
74 | S&Ffollowingsizes(dia.)ofISImarkedmediumdutyPVCconduitalongwithaccessoriesinsurface/recessedusingsaddles,clamps,fastenerasrequiredincludingcuttingthewall,coveringconduitand making good the same as required. 25mm |
75 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existingsurface or recessed conduit/casing capping including making connections etc. as required. Group p-2 |
76 | 1 x 1.5 sq.mm |
77 | 2 x 2.5 sq.mm |
78 | 2 x 4.0 sq.mm for powder circuit |
79 | P&F two pin energy efficient compact flourscent lamp in existing holder/fixture as required. 36 watt 4 pin Group-II |
80 | P&F 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/C/D tripping characterstic) ISI marked IS 8828 (1996)/ conforming to IEC 60898 in existing boards/sheets including making connections with lugs, testing etc. as required6 A to 32 A rating(Havells, HPL, SSK, Anchor, Khaitan).Grade-II. |
81 | P&F Recessed/Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ power painted complete with 100 A copper bus bar, shorting link, neutral link, earth link and din bar, conforming to IS13032 & IS8623 including making internal DB terminations with copper lugs, testing etc. as required Single door (single phase) 12 Way. Grade-II. |
82 | Providing&Fixingofmodulartypelockablefeaturesocket dulyISImarked(IS:1293)asperPWDspecificationfor electrical Works,made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tipwith IP-20 rating , minimum width of 1 module switch toggle( PUSH PART ) should not less then 20mm,includingall as per pre approved by Engineer in charge,making connections, testing etc. as required.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR .6 A3 pin shuttered socket |
83 | Providing&Fixingofmodulartypelockablefeaturesocket dulyISImarked(IS:1293)asperPWDspecificationfor electrical Works,made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tipwith IP-20 rating , minimum width of 1 module switch toggle( PUSH PART ) should not less then 20mm,includingall as per pre approved by Engineer in charge,making connections, testing etc. as required.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR .6 A3 pin shuttered socket 16 A6 pin shuttered socket |
84 | Providing & Fixing of modular type switch/ bell push duly ISI marked(IS:3854)asperPWDspecificationforelectrical Works, made out of unbreakableand fireretardant vergin polycarbonatewithbrassterminalsandcaptivescrews& silver alloy contact tipwith IP-20 rating , minimum width of 1 moduleswitchtoggle(PUSHPART)shouldnotlessthen 20mm, including allasperpreapprovedbyEngineerin charge,making connections, testing etc. as required.All as per pre approved by Engineer in charge.For additional technicalparameters of products/ work, refer Annexure "A" attachedwith this BSR .6 A one way switch |
85 | Providing & Fixing of modular type switch/ bell push duly ISI marked(IS:3854)asperPWDspecificationforelectrical Works, made out of unbreakableand fireretardant vergin polycarbonatewithbrassterminalsandcaptivescrews& silver alloy contact tipwith IP-20 rating , minimum width of 1 moduleswitchtoggle(PUSHPART)shouldnotlessthen 20mm, including allasperpreapprovedbyEngineerin charge,making connections, testing etc. as required.All as per pre approved by Engineer in charge.For additional technicalparameters of products/ work, refer Annexure "A" attachedwith this BSR .16 Amp.1 Moduleswitch With Led Indicator |
86 | Providing &Fixing of following sizepolycarbonatemodularboxes as per PWD specification for electrical Works, as per IS 14772-2000 in recess/ surface suitable for modular accessories as required.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work. , refer Annexure "A" attached with this BSR4-5 Module |
87 | Supplying and fixing of power plug point with Modular accessories as per PWD specification for electrical Works, on hot dipped galvanized modular box of 18 SWG with earthing terminal/connector on surface or in recessed with suitable size of modular face place with grid plate and cover plate including cost ofISI marked modular 16 amp. Switch (IS :3854) and 3/5 pin 16 amp. socket outlet (IS:1293) [ as per detailed in respective item in BSR] , making connection , testing , etc. as required.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR |
88 | Providingandapplyingsuperiorqualityemulsionforwallpainting with Velvet touch/Royal paint etc of approved brandandmanufacturetogiveanevenshadewithputtyandpreparation of surface applying with the help of paint roller thework complete in all respect as per direction of Engineer-in-charge.New Work Three or More coat |
89 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish : 12mm thick. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail