Tender For Compressive Annual Maintenance Contract Camc For Shiplift System For A Period Of Five Years At Naval Ship Repair Yard Karwar.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
03 Oct 2023
0 days left
EMD
81.64 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
karwar → Karnataka
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Compressive Annual Maintenance Contract Camc For Shiplift System For A Period Of Five Years At Naval Ship Repair Yard Karwar.
BOQ
| Sl. No. | Item Description |
| 1 | Manpower/ Service Charges for undertaking the AMC (Per year) |
| 2 | All routines to maintain Shiplift under Lloyds classification:- Survey to be undertaken by Classification society as per Classification society Code of Lifting Appliances in Marine Environment - Jan 1987 Chapter 4, Section 4.4 or equivalent IACS. The Contractor is to undertake all routines and maintenance as required by classification society. The system is to be maintained under classification for the duration of the contract. (Per year) |
| 3 | Adjustment of Hoist Stub Axels (per hoist) (as and when required) |
| 4 | Touch up Painting of Platform structure @ 4 sqmtrs/ltrs/coats - 01 or 02 coats, total 1000 micron approx. (20% of total area per year) |
| 5 | Complete Steel survey of the platform under classification society (Per year) |
| 6 | Associated steelrenewal (Steel provided by contractor) |
| 7 | Renewal of Malaysian Balau Timber |
| 8 | Major overhaul of Gear boxes (per hoist) (as and when required) |
| 9 | Supply, installation, commissioning and testing of Centralised AC system (24 TR) of Shiplift Control Tower |
| 10 | Maintenance of Air Conditioning System of the Shiplift Control Tower (Complete overhauling with maintenance)(per Quarter) |
| 11 | Conservancy of Shiplift area, shiplift control tower and berth area (Per quarter) |
| 12 | Complete overhauling of five capstan, repairs, replacement of spares, if found defective (twice during Contract period) |
| 13 | Rocol RD 105 Grease (Wire ropes) |
| 14 | EP 2 Grease (Sheave + Hoist Components) |
| 15 | Cardium Compound – Shell(Open Gears) |
| 16 | Servomesh SP 320 (for replacement of oil and further top up on following years) |
| 17 | Servo Mesh SP 320 (Capstan Gear Box ) |
| 18 | White Spirit |
| 19 | Thinner |
| 20 | Gear box Gasket sheet 2mm |
| 21 | Motor Gasket |
| 22 | Brake Spring |
| 23 | Coupling Rubber Gasket |
| 24 | Motor brake assembly complete set |
| 25 | Flexible coupling assembly |
| 26 | Brake friction disc |
| 27 | Brake coil kit |
| 28 | Ethernet Module |
| 29 | PLC Battery |
| 30 | PLC CPU |
| 31 | CPU Backplane 10 Slots |
| 32 | CPU Backplane 08 Slots |
| 33 | Capacitor 680 MFD,250V |
| 34 | Bridge Rectifier Block 5 Amps |
| 35 | Busman Fuse 5A |
| 36 | Busman Fuse 3A |
| 37 | HHC |
| 38 | Pawl Limit Switch (as per sample) |
| 39 | Pawl Solenoid |
| 40 | Limit Switch (NLU/FLU) |
| 41 | Emergency Push Button |
| 42 | Power/Control Terminal Box suitable Rubber Gasket |
| 43 | Three Pole Circuit Breaker( MCB ) |
| 44 | UPS 110 to 110 AC 2000 VA |
| 45 | 24 V DC / 7.5 A Power supply unit |
| 46 | Four pole contactors 24 V DC (MM00) |
| 47 | Four pole contactors MM00 (110 V AC) |
| 48 | Rechargeable battery (12 V 26 AH) |
| 49 | Power Failure Relay (PFR) |
| 50 | AC Current Transducer Input 0-1, Range 0-60 A, CTR/1A, Output 4-20mA,AUX VOLT 24 |
| 51 | Hoist Motor Starter Contactor |
| 52 | Current Transformer 60/1 7.5-1 (as per sample) |
| 53 | Motor Over Load Protector |
| 54 | Up/down Mechanical interlock |
| 55 | Hoist motor Compartment Knob as per sample |
| 56 | Oil Seal 220x250x15 |
| 57 | Oil Seal50 X 72 X 08 |
| 58 | Breather Filter (Gear Box) |
| 59 | Wire Ropes (A side) RH Lay (Green) |
| 60 | Wire Ropes (B side) LH Lay (Red) |
| 61 | Lower Sheaves Bearing 32040 |
| 62 | Sheave Seals (Clark Bearing Seals). |
| 63 | Grease Nipple for sheaves, pillow blockandcapstan bearings (as per sample) |
| 64 | Elbow Lubricant fittings as per sample |
| 65 | Lower Sheave Complete Set Lower Sheave Complete SetComplete Lower Sheave Cartridge with Bearings as per drawings and LR certifiedIncludes:-(a) Mfg of 1080 F sheave as per IS 2707 grade UT level II and LR certified as per dwg no 502-04 – 1 nos(b) Mfg of 990 F sheave as per IS 2707 grade UT level II and LR certified as per dwg no 502-03 – 3 nos c) Sheave shaft forged to BS 970817 M 40 (EN 24) and LR certified as per Dwg no 501-04 – 1 nos(c) Sheave shaft forged to BS 970817 M 40 (EN 24) and LR certified as per Dwg no 501-04 – 1 nos(d) End cap as per dwg no 503-01. MIL ASTM A 572 grade 50 – 2 nos(e) Distance piece as per dwg no 505-03 Mat IS 2062 Gr B, LR certified – 1 nos(f) Spacer plate of IS 2062 Gr B as per dwg 504-01(sheaves) – 4 nos(g) Double Lip Clarke seals CWI-320420X – 8 nos(h) Lubrication fittings as per dwg – 1 set(j) Bearing spacer inner / outer – 8 nos(k) Bearing 32040 – 8 nos |
| 66 | Distance piece as per dwg no 505-03 Mat IS 2062 Gr B, LR certified |
| 67 | Lower Sheave Securing Bracket with 02 in bolts as per drawing /specification |
| 68 | Four Pole Contactor 240V AC |
| 69 | Single Phasing Relay HLVD2 |
| 70 | Power Contactors |
| 71 | HF Fuses, 63 AMPS |
| 72 | HF Fuses, 30 AMPS |
| 73 | HF Fuses, 6 AMPS |
| 74 | HF Fuses, 4 AMPS |
| 75 | HF Fuses, 2 AMPS |
| 76 | Hand Switch assembly-complete |
| 77 | Capstan brake assembly including EM Brake-0, Rotating Friction Disc-01,Spring-06, |
| 78 | Motor Bearing (Capstan) |
| 79 | Tapper Roll Bearing |
| 80 | Self-Adjustment Bearing |
| 81 | Malaysian Balau Timber (Cum) |
| 82 | Rail Clips molynuex |
| 83 | Rail Clip securing Stud & Bolts with washer |
| 84 | Coach screw with washer as per sample for securing Malaysian balau wood |
| 85 | Shim Pack -100x340, 1mm |
| 86 | Shim Pack – 260x340, 1mm |
| 87 | Rail Shims – 100x 340 , 0.5mm |
| 88 | Rail Shims -100 x 340,0.25mm |
| 89 | Rail Shims – 100 X 340, 0.1mm |
| 90 | Signal Conditioner Cable .75 SQ mm BELDON make 9418 or equivalent |
| 91 | Control Cable 19Core, 2.5 sq mmXPLE cable |
| 92 | Control Cable 12Core, 2.5 sq mmXPLE cable |
| 93 | Control Cable 7Core, 2.5 sq mmXPLE cable |
AI Tender Summary
Tender Timeline
Sep 07, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedOct 03, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 04, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender