|
| 1 | Servicing/repairing of LT panel board of any size, cleaning of panel board internally and externally, tightening of all screws and nut & bolts, replacing of minor parts like screws, steel nut and bolts, washers, lugs, copper wiring, repair to insulation by providing in naked surface, PVC tape etc, checking of serviceability of all switch gears/meters and replace the following items as required :- |
| 2 | Supply and fixing in replacement in existing LT Panel,MCCB 3 Pole , thermal and magnetic release, 63/80 Amps,16KA complete all as specified and directed. |
| 3 | Supply and fixing in replacement in existing LT Panel,MCCB 3 Pole , thermal and magnetic release, 125 Amps,16KA, Ics=100%Icu complete all as specified and directed. |
| 4 | Supply and fixing in replacement in existing LT Panel,MCCB 3 Pole , thermal and magnetic release, 160 Amps, 25KA, Ics=100%Icu complete all as specified and directed. |
| 5 | Supply and fixing in replacement in existing LT Panel MCCB 4 Pole , thermal and magnetic adjustable type, 250 Amps, 35KA complete all as specified and directed. |
| 6 | Supply and fixing in replacement in existing LT Panel MCCB 4 Pole , thermal and magnetic adjustable type, 315 Amps, 36KA complete all as specified and directed. |
| 7 | Supply and fixing in replacement in existing LT Panel MCCB 4 Pole , thermal and magnetic adjustable type, 400 Amps, 36KA, Ics=100%Icu complete all as specified and directed. |
| 8 | Supply and fixing in replacement in existing LT Panel MCCB 4 Pole , thermal and magnetic adjustable type, 630 Amps, 50KA, Ics=100%Icu complete all as specified and directed.Make for Srl item No. 2.00 to 8.00: SCHNEIDER/ LEGRAND/ INDOASIAN/ HAVELLS/ L&T/ HPL/ ABB/ SIEMENSNotes for Srl item No. 2.00 to 8.00 : (a) Rate quoted forincluding the cost of MCCB of suitable frame and make approved. It fit closely in LT panel to ensure proper closing of compartments/panel door.(b) The rate quoted include the cost of spreader/ extension links and phase separator |
| 9 | Supply and replacement of automatic power factor control relay, three phase sensing, 8 steps minimum having LCD display complete all as specified.Make : Havells/C&S/ Schneider/ Legrand/ L&T |
| 10 | Supply and replace PVC insulated FRLS copper wire single core, 1100 volts , 6 sqmm size complete all as specified and directed. |
| 11 | Supply and replace PVC insulated FRLS copper wire single core, 1100 volts , 10 sqmm size complete all as specified and directed. |
| 12 | Supply and replace PVC insulated FRLS copper wire single core, 1100 volts , 16 sqmm size complete all as specified and directed. |
| 13 | Supply and replace PVC insulated FRLS copper wire single core, 1100 volts , 25 sqmm size complete all as specified and directed. |
| 14 | Supply and replace PVC insulated FRLS copper wire single core, 1100 volts , 35 sqmm size complete all as specified and directed. |
| 15 | Supply and replace PVC insulated FRLS copper wire single core, 1100 volts , 70 sqmm size complete all as specified and directed.Note for srl No. 11.00 to 15.00 : The rate including required thimbles for connection |
| 16 | Supply and replace aluminium bus bar of any size as per site requirement complete with required holes including any alteration required complete all as specified |
| 17 | Supply and replace copperbus bar of any size as per site requirement complete with required holes including any alteration required complete all as specified |
| 18 | Material and labour in replacement MCB SP 6 Amps to 32 Amps, 240V with rupturing capacity 10 KA, C Curve complete all as specified |
| 19 | Material and labour in replacement MCB SPN32 Amps, 240V with rupturing capacity 10 KA, C Curvecomplete all as specified |
| 20 | Supply and fixing 415V 10KA \"C\" curve miniature circuit breaker (MCB) of triple poles andcurrent carrying capacity 32Amps complete all as specified and directed. |
| 21 | Supply and replace 3 Phase digital Flush Mounting Multifunction Meter, Class 1 meter, 96X96 mm, parameter V, current, Frequency, PF, MD, KWh complete all as specified and directed. |
| 22 | Supply and replace 3 Phase digital Flush Mounting Ammeter, Class 1 meter, 96X96 mm 3 Ph 4W 240V 5A complete all as specified and directed. |
| 23 | Supply and replace 3 Phase digital Flush Mounting Voltmeter, Class 1 meter, 96X96 mm 3 Ph 4W 240V 5A complete all as specified and directed.Makes for srl No. 21.00 to 23.00 : L&T/ Legrand/ Schneider/ Siemens/ Havells/ HPL. |
| 24 | Supply and replace standard universal LED indicators of colour RYB complete all as specified and directed. |
| 25 | Supply and fixing in replacement cable gland including disconnecting cable, putting and fixing gland and reconnection of cables for XLPE aluminium cable of size 16 to 70 SQMM all as specified and directed. |
| 26 | Supply and fixing in replacement cable gland including disconnecting cable, putting gland and reconnection of cables for XLPE aluminium cable of size 95 to 185 SQMM all as specified and directed. |
| 27 | Supply and fixing in replacement cable gland including disconnecting cable, putting gland and reconnection of cables for XLPE aluminium cable of size 220 to 300 SQMM all as specified and directed. |
| 28 | Supply and lay insulation rubber mat class ‘B’ conforming to IS 15652-2006 (ISI marked) of 2.5 mm thick and 1 mtr width and roll of 10/20 mtr, working voltage 11 kV, dielectric strength 45 complete all as specified and directed. Make : Jyoti/ Vardhman or equivalent |
| 29 | S&F of double legged informatory sign board of Size 1.20x0.90m single side fixed on frame of stainless steel of round pipe 50mm dia (304 grade). Outer frame all around of stainless steel pipe 50mm dia(304 grade) to be provided along the round pipe. The boards are to be made or night intensity unmettalised prismatic grade retro-reflective sheeting 400 micron thick of Make-Avery Dennison/E3M, duly processed on 3 mm thick aluminium composite panel conforming to IS:736 with heat lamp vacuum applicator, etched treatment hand queezed rolled applicator machine. The letters of any description, size cutout, logos, formation signs etc shall be of 400 micron thick of any colour to be cut with high pressure computerised cutting plotter or with high quality digital printing with lamination to have longer life and duly fixed on the sheet base high intensity grade unmettalised prismatic grade white sheeting. The aluminium composite panel duly processed as above shall be fixed on to the frame with aluminium snap head rivets in very neat manner. Then these boards are to be fixed on vertical posts made of 50 mm dia stainless steel pipe of 304 grade 16 gauge, glossy finish 3 mtr long with 50 mm dias SS pipe and MS plate 3 mm thick duly welded at bottom of pipes including 02 Nos decorative bowls of SS 304 grade to be provided at the top of 50 mm dia SS pipe. Total height of pipe shall be 3.0m above the ground level| and 0.45 m to be embedded and grouted in ground in cement concrete(1:2:4) type B-1 using 20 mm graded stone aggregate including necessary excavation and earth filling, removal of surplus excavated material and making good the surface complete all as specified. The sign boards shall be fabricated according to lRC-67-2010 (Revised specifications) and as per MORTH specification clause 801.1.Note: The letters shall be 75mm to 100mm height of white colour cut to shape with special plotter. Dept will provide the details of writing letter to board |
| 30 | Supply and fixing glow sign board of size 1500x900x100mm depth for E/M installations , made out of angle iron frame and GI sheet front side coveredwith laminated opal front coverprinted with letters/sketch, fitted with IP67 rated LED strip light inside in a distance of 150mmhorizontally, mounted on wall all as specified and directed. Dept will provide the details of writing letter to board |
| 31 | Supply and replace bus bar chamber fabricated using sheet steel (CRCA) and epoxy powder coated with 4 Nos aluminium bus bar 200 Amps, 600 mm length duly drilled hole for fixing cables with necessary fixing arrangements all as directed. |
| 32 | Material and labour for trimming and cleaning tree branches all around the street light for better visibility of light all as specified and directed. |
| 33 | Preparation of old painted surface of electric poles mild steel tubular type any type / make / model/sizeabove ground level with two coats of aluminium paint on pole including writing the pole number on each pole complete all as specified and directed |
| 34 | Material and labour for Writing the Pole No. with black paint at a level of 1.5 m above ground level on PCC/steel tubularpole complete all as specified and directed. |
| 35 | Preparing the old steel painted surfaces of LT panel Board of size upto 3metre width and upto 3metre length and applyingtwo coat of synthetic enamel paint of existing shade / colour with spray painting including removing of old paintcomplete all as specified and directed. |
| 36 | Servicing of high mast light system, cleaning of panel board internally and externally, tightening of all screws and nut & bolts, replacing of minor parts like screws, washers, lugs etc, cleaning/greasing of steel wire rope, servicing of electric motor and winding of motor in case found defective, checking of serviceability of all switch gears, high mast system, replacement of minor parts as required to make it functionalall as specified and directed |
| 37 | Supply and fixing in replacement PVC insulated copper wire five core, 1100 volts, 2.5 sqmm size complete all as specified and directed. |
| 38 | Supply and fixing in replacement steel wire rope 6 mm dia 7/19 construction, grade AISI, breaking load cap 2350 Kg all as specified and directed. |
| 39 | Servicing of LT ACB of any capacity , cleaning of entire panel internally and externally cleaning with CRC and WD-40, tightening of screws, replacement required parts and make it functional all as specified and directed |
| 40 | Renewal of unserviceable lead acid rechargeable tubular inverterbatteries by new 12 volts, 200 AH duly initial charged for VCB backup complete all as specified and directedMake: Exide / Amaron /Luminous |
| 41 | Attending breakdown for repair/replacement of unserviceable light fittings, MCCBs, cables including carrying out minor repairs such as changing of small pieces of wires, tightening of loosen electric connections ,nuts, bolts screws, or switches, disconnecting andrefixing of LT cables etc as required to make the system functional in any time by deploying sufficient electrician alongwith with helper incl necessary T & P complete all as specified and directed.Notes: (a) Replacement of items shall be measured and paid for separately under respective items.(b) Number of complaints may vary day to day and shall be on required basis. Contractor shall quote their rates accordingly.(c) Breakdown complaintswill collectedfrom complaint cell or by telephonically from duty elect/JE E/M/Engr-in-Charge.(d) In case of failure on the part of contractor for attending any breakdown within 2 hrs a penalty shall be imposed @ Rs.2000/- per complaints and recovered from his dues |
| 42 | Material and labour for rectification/refixing of loose/hanging armoured cable of any size including fixing of saddles and screws, fastners as required complete all as specified and directed.Note : The cost of saddles and screws, fastners or any other fixing/hanging mtrl requiredare deemed to be included in the quoted rate. |
| 43 | Removing the faultyLT UG cable fromtrenches/poles/wall etc and re Laying the samein trenches/poles/wall etc and of LT UG cable 2 core 10sqmm to 4 core 25 sqmm after rectifying fault/repairing joints complete all as specified and directed. Notes : (a) Lugs and glands are deemed to be included in the rate quoted for laying of cable and to be usedwherever required while connecting cables to the panel board. Earth work such as excavation, refilling etc,and cable joints shall be measuredand paid separately under relevant item.(b) Excavation and earth work shall be measured and paid separately. |
| 44 | All as per srl item No. 43.00 here-in-before but LT UG cable 3.5 core 35 sqmm to 3.5 core 95 sqmm after rectifying fault/repairing joints. |
| 45 | All as per srl item No. 43.00 here-in-before but LT UG cable 3.5 core 120 sqmm to 3.5 core 300 sqmm after rectifying fault/repairing joints. |
| 46 | Supply, laying, testing and commissioning in trenches/clamped with wall/on floor/in ducts LT Cable XLPE insulated sheathed, galvanized steel strip or wire armoured, electric power cables ( heavy duty) 1100 volts grade with stranded aluminium conductor of size 300 sqmm 3.5 Core complete all as specified and directed. |
| 47 | Supply,laying, testing and commissioning in replacement of LT cable XLPE insulated sheathed, galvanized steel strip or wire armoured, electric power cables ( heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 sqmm 2 core laid in trenches/on floor/ under roads / through pipes complete all as specified and directed |
| 48 | Supply,laying, testing and commissioning in replacement of LT cable XLPE insulated sheathed, galvanized steel strip or wire armoured, electric power cables ( heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 sqmm 4 core laid in trenches/on floor/ under roads / through pipes complete all as specified and directed |
| 49 | Supply,laying, testing and commissioning in replacement of LT cable XLPE insulated sheathed, galvanized steel strip or wire armoured, electric power cables ( heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 sqmm 3.5 core laid in trenches/on floor/ under roads / through pipes complete all as specified and directed |
| 50 | Supply,laying, testing and commissioning in replacement of LT cable XLPE insulated sheathed, galvanized steel strip or wire armoured, electric power cables ( heavy duty) 1100 volts grade with stranded aluminium conductor of size 50 sqmm 3.5 core laid in trenches/on floor/ under roads / through pipes complete all as specified and directed |
| 51 | Supply,laying, testing and commissioning in replacement of LT cable XLPE insulated sheathed, galvanized steel strip or wire armoured, electric power cables ( heavy duty) 1100 volts grade with stranded aluminium conductor of size 70 sqmm 3.5 core laid in trenches/on floor/ under roads / through pipes complete all as specified and directed |
| 52 | Supply,laying, testing and commissioning in replacement of LT cable XLPE insulated sheathed, galvanized steel strip or wire armoured, electric power cables ( heavy duty) 1100 volts grade with stranded aluminium conductor of size 95 sqmm 3.5 core laid in trenches/on floor/ under roads / through pipes complete all as specified and directed |
| 53 | Supply,laying, testing and commissioning in replacement of LT cable XLPE insulated sheathed, galvanized steel strip or wire armoured, electric power cables ( heavy duty) 1100 volts grade with stranded aluminium conductor of size 185 sqmm 3.5 core laid in trenches/on floor/ under roads / through pipes complete all as specified and directed |
| 54 | Supply, fixingand testing of Cable Jointing Kit for 1.1 KV grade cable straight through joint heat shrinkable joint complete with jointing material and accessories suitable forXLPE armoured aluminum cable of size 16 to 50 sqmm 3.5 core complete all as specified and directed.Make - Denson/ M seal/ Raychem. |
| 55 | Supply, fixingand testing of Cable Jointing Kit for 1.1 KV grade cable straight through joint heat shrinkable joint complete with jointing material and accessories suitable forXLPE armoured aluminum cable of size 70 to 120 sqmm 3.5 core complete all as specified and directed. Make - Denson/ M seal/ Raychem. |
| 56 | Supply, fixingand testing of Cable Jointing Kit for 1.1 KV grade cable straight through joint heat shrinkable joint complete with jointing material and accessories suitable forXLPE armoured aluminum cable of size 150 to 185 sqmm 3.5 core complete all as specified and directed.Make - Denson/ M seal/ Raychem. |
| 57 | Supply, fixingand testing of Cable Jointing Kit for 1.1 KV grade cable straight through joint heat shrinkable joint complete with jointing material and accessories suitable forXLPE armoured aluminum cable of size 240 to 300 sqmm 3.5 core complete all as specified and directed.Make - Denson/ M seal/ Raychem. |
| 58 | Supply, fixingand testing of Cable Jointing Kit for 1.1 KV grade cable for indoor type termination heat shrinkable joint complete with jointing material and accessories suitable forXLPE armoured aluminum cable of size 16 sqm to 50 sqmm 3.5 core complete all as specified and directed. Make - Denson/ M seal/ Raychem. |
| 59 | Supply, fixingand testing of Cable Jointing Kit for 1.1 KV grade cable for indoor type termination heat shrinkable joint complete with jointing material and accessories suitable forXLPE armoured aluminum cable of size 70 sqm to 120 sqmm 3.5 core complete all as specified and directed.Make - Denson/ M seal/ Raychem. |
| 60 | Supply, fixingand testing of Cable Jointing Kit for 1.1 KV grade cable for indoor type termination heat shrinkable joint complete with jointing material and accessories suitable forXLPE armoured aluminum cable of size 150 sqm to 185 sqmm 3.5 core complete all as specified and directed.Make - Denson/ M seal/ Raychem. |
| 61 | Supply, fixingand testing of Cable Jointing Kit for 1.1 KV grade cable for indoor type termination heat shrinkable joint complete with jointing material and accessories suitable forXLPE armoured aluminum cable of size 240 sqm to 300 sqmm 3.5 core complete all as specified and directed.Make - Denson/ M seal/ Raychem. |
| 62 | Supply and replace electronic LED driver suitable for street light fitting 45 to 90 wattswith lower THD, Output Open / Short Circuit protection, Phase to Phase protection, Over Voltage protection, Surge Voltage protection & other safety tests as per IS 15885 Part-2/Sec13 complete all as specified and directed. |
| 63 | Supply and replace10 kV Surge Protection Device suitable forLED street light fitting 45 to 120 watts complete all as specified and directed |
| 64 | Supply and fixing informatory board of size 1200x900 mm frame made out of MS square tube of size 25mmx25mm, 1.6 mm thick and front side covered with coloured flex sheet duly printed with required information all asspecified and directed. Dept will provide the details of writing letter and colour of sheet and letters to board |
| 65 | Excavation in trenches in soft/loose soil not exceeding 1.50 mtr wide and not exceeding 1.50 mtr in depth for laying of cables and gettingout complete all as specifiedand directed. |
| 66 | Returning, filling in, including spreading, leveling watering and well ramming inlayers not exceeding 25cm thick each layer compete all as specified and directed |
| 67 | Removal of surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point completeall as specified and directed. |
| 68 | Material and labour for sand cushioning with a layer of sand 8cm thick before laying of cable and 15 cm thick after laying of cable in trenches punned to thickness of 18 cm complete all as specified. |
| 69 | Supply & laying old size sub class \"B\" bricks laid flat in trenches over the cable with the length of brickperpendicular to the directionof cable length, adjacent/abutting each othercomplete all as specified and directed. |
| 70 | Material and labour PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in foundations of pole/stay/feeder pillar box/ LT panel/coping to pole upto 40 cm height from ground level including necessary form work and fair finish to exposed surfaces without using extra cement etc complete all as specified |
| 71 | Material and labour for lowering of high mast light system height upto 21 mtr for repair/replacement of light fittings and lifting up after repair work complete all as specified and directed. |
| 72 | Supply and fixing in replacement LED Flood lights 150 watts from building/pole/highmast,IP 66 High power LED Flood light with pressure die-cast aluminium housing complete with all accessories driver, SPD complete all as specified and directed. |
| 73 | Supply and fixing in replacement LED Flood lights 250 watts from building/pole,IP 66 High power LED Flood light with pressure die-cast aluminium housing complete with all accessories driver, SPD complete all as specified and directed. |
| 74 | Supply and fixing in replacement of LED aviationObstruction light luminaire min 25 watt comprising aluminium housing andpolycarbonate enclosure complete with all accessories all as specified and directed. |
| 75 | Supply and replacement LED Street light 70 watts, surge protection 10kv, 5700Kwith pressure die cast alumimium housing ,high power LEDs, top opening and separate driver compartmentwith IP 66 protection complete all as specified and directed |
| 76 | Supply and replacement LED Street light 90 watts, surge protection 10kv, 5700Kwith pressure die cast alumimium housing ,high power LEDs, top opening and separate driver compartmentwith IP 66 protection complete all as specified and directed |
| 77 | Supply and fixingin replacement Bracket for street light fitting made of 40mm dia Light grade GI pipe, 1.5 mtr length bent to suitable shape for fixing of Street light fitting with all necessary accessories bracket, nuts, bolts, washers, two clamps made out of flat iron two pieces of size40mm x 6mm x500mm fabricated in shape and drilled holes for nuts and bolts, and painting with one coat of red oxide paint and two coats of aluminium paint all as specified and directed |
| 78 | S&F in replacement weather proof street light Junction box with 4 pole aluminium bus bar and one MCB SP 6 amp mounted on din rail, made out of Polycarbonate with glass fibre reinforced. The polycarbonate Junction box shall be not less than 250x200x105mm size suitable for 10/16sqmm cable size with terminals, environment friendly, Protection IP 66. The gasket material shall be Polyurethane and the gasket shall be internally embedded |
| 79 | Supply and fix automatic street light timer (Nature switch) panel with infrared sensor technology, pole/wall mounted type, 3 phase, 12KW,Contactor 32 Amps TP, MCB 32 Amps TPN for incoming and outgoing, prewired with cable connectors, enclosure type FR grade thermoplastic polycarbonate with hinged lid all as specified and directed |
| 80 | Supply and fix automatic street light timer (Nature switch) panel with infrared sensor technology pole/wall mounted type, single phase, 5KW,Contactor 32 Amps SP, MCB 32 Amps SPN for incoming and outgoing, prewired with cable connectors, enclosure type FR grade thermoplastic polycarbonate with hinged lid all as specified and directed |
| 81 | Supply and install in Replacement LED Post toplight 40 watt, energy saving, environment friendly Pressure die cast housing with clear/opal diffuser suitable for landscape lighting 5700K. Prismatic polycarbonate cover and IP65 protection with operating upto RH 90%, THD<10%, including all accessories complete all as specified and directed |
| 82 | Supply and install in Replacement LED Post toplight 25 watt, energy saving, environment friendly Pressure die cast housing with clear/opal diffuser. suitable for landscape lighting 5700K. Prismatic polycarbonate coverand IP65 protection with operating upto RH 90%, THD<10%, including all accessories complete all as specified and directed. |
| 83 | Supply and fixing wiring to street light inpole/wall along with earth wire withof size (2x1.5 sq. mm +1x1.5 sq. mm earth wire) with FR PVC insulated copper conductor, single core cable through PVC/steel conduit as required complete all as specified and directed |
| 84 | Material and labour 10mm thick rendering in cement mortar (1:3) on fair faces of brick wall or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 85 | Material and labour brick work with sub class \"B\" old size bricks, straight or curved on plan exc. 6 mtr mean radius built in cement mortar (1:6) complete including plastering and white wash all as specified and directed |
| 86 | MS Plates plain or chequered any thickness,cut to any size as per site requirement, forming holes,for duct cover incl two coat of black colour synthetic enamel paint over a coat of primer’ etccompete all as specified and directed. |
| 87 | Cross arms, MS hollow pipes (round or square) bracings, supports, clamps and back plates fabricated from structural steel sections including nuts and bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive or one primer coat, and one under coat and one finishing coat of paint compete all as specified and directed |
| 88 | Taking out existing cable of any size in trench and Cleaning of trench and relaying of cables all as specified and directed. |
| 89 | Supply and fixing galvanised pipe light grade of ISI marked 50 mm bore for passing of cable fixed to poles/walls/lay under floor, Roads etc. complete with and including fittings as required compete all as specified and directed. |
| 90 | Supply and fixing galvanised pipe light grade of ISI marked 100 mm bore for passing of cable fixed to poles/walls/lay under floor, Roads etc. complete with and including fittings as required compete all as specified and directed. |
| 91 | Material and labour for boring hole under the road / pavement / hard standing with the help of trenchless technology using ultra sound technique and necessary machine complete all as specified & directed. |
| 92 | Supply and fixmaintenance free battery 12 volt, 180 AH duly initial charged for DG set complete all as specified and directed. Make : Exide/Amaron/Luminous |
| 93 | Supply, install, testing and commissioning in replacementhigh mast light control panel, outdoortype, Floor mounted, double door, weather andvermin prooftotally enclosed made out of 2 mm thick CRCA sheet machine pressedof suitable size, suitable to operate on 3 phase 4 wire system , 415volts, 50 Hz with front openable and locking arrangement, transparent sheet for automatic detection of sunlight, bottom gland plate with sufficient numbers of circular cable entry holes, complete duly powder coated with 7 tank process mounted on angle iron stand made out of angle size 40 x 40 x 5 mm of 30mm height from ground level including grouting in PCC (1:3:6) type C-1 comprising with following complete all as specified:-(a) Incoming(i)MCCB 32 Amp, 415 V, 10 KA, 4 pole-01 No.(ii)Indicator with LED lamps for RYB , 3 Phase with MCBs set of three-01 set(b) OUTGOING : -(i) Contactor 3 pole 32 Amps with auxiliary contact for lighting -01 No.(ii) Contactor 3 pole 32 Amps with auxiliary contact and forward and reverse function switch for motor -02 Nos.(iii) Over load relay - 01 No(iv) Time switch astronomical 415 Volts, 20 Amps - 01 No with contactor 32 Amps, 3 pole with provision of manual override |
| 94 | Supply, installation and testing of AMF panel outdoor type suitable for DG set 400 KVA with factory made type weather proof, vemin proof fully ventilated both side opening and fabricated out of 3.15mm thick CRCA sheet and mounting channel 75mm having copper bus bar three phases and one neutral of suitable capacity, fixed on insulator by coloured heat shrinkable sleeves and housed in specified including powder coated internally externally the entire steel surfaces, all the cover shall have fully locking arrangement. fully internally wired with suitable size of thimbles and internally wiring of suitable size all as specified and directed, comprising with following parts :-(a) Under voltage relay 415V AC for main supply(b) Under voltage relay 415V AC for DG supply(c) AC meter 230 V, 2 NO+2 NC(d) DC meter 24V(e) Control MCB SP 16A(f) Control MCB SP 6A(g) Automatic battery charger 24V(h) LED indicating light for main and DG(j) LED indicating light for main battery charger(k) Digital voltmeter (0-500V) with selector switch(l) Digital Ammeter (0-1000A)with selector switch(m) 200/5A or suitable required cap(n) DC Volt meter 15/30V(o) DC Ammeter 0-15A(p) Trickle/ Boost switch(q) Auto/ Manual switch(r) Plus button start & stop with element(s) Power contactor 600A 3 pole 415V for DG(t) Power contactor 600A 3 pole 415V for Main(u) MCCB 630A 35KA, 3 pole for main and DG supply(v) Control Relay(w) Overload Relay(x) Overload Relay 2.5-4A |
| 95 | Supply, install, testing and commissioning in replacement LT panel, outdoor cubicle type, Floor mounted, double door, weather andvermin prooftotally enclosed made out of 3.0 mm thick CRCA sheet machine pressedof suitable size, suitable to operate on 3 phase 4 wire system , 415volts, 50 Hz with front and rear openable and locking arrangement, bottom gland plate with sufficient numbers of circular cable entry holes, complete duly powder coated with 7 tank process mounted on angle iron stand made out of angle size 50 x 50 x 6 mm of 50cm height including grouting in PCC (1:3:6) type C-1 and brick masonry platform 45cm high from ground level comprising with following complete all as specified:-(i) Bus bar strip, four pole and capacity 400 Amps aluminium,coloured with plastic coated insulated and sleeves in four colours (Red, Yellow, blue and black ) fixed on porcelaininsulators with necessary nuts and bolts and washers etc (ii) INCOMING : -(a) MCCB 250 Amp, 415 V, 36 KA, 4 pole Adjustable type-01 No.(b)Indicator with LED lamps for RYB , 3 Phase with MCBs set of three-01 set(c) Digital Ammeter (0-630)Amps - 01 No(d) Digital Voltmeter (0-500)Volts - 01 No(ii) OUTGOING : -(a) MCCB 160 Amp, 415 V, 16 KA, 4 pole fixed type -02 Nos.(b) MCCB 63 Amp, 415 V, 16 KA, 4 pole fixed type-02 Nos.(c) MCB TPN 32 Amp, 415 V, 10 KA- 02 Nos.(d) Time switch astronomical 415 Volts, 20 Amps - 01 No with contactor 32 Amps, 3 pole with provision of manual override |
| 96 | Supply, install, testing and commissioning in replacement LT panel, outdoor cubicle type, Floor mounted, weather andvermin prooftotally enclosed made out of 3.0 mm thick CRCA sheet machine pressedof suitable size, suitable to operate on 3 phase 4 wire system , 415 volts, 50 Hz with front and rear openable and locking arrangement, bottom gland plate with sufficient numbers of circular cable entry holes, complete duly powder coated with 7 tank process mounted on angle iron stand made out of angle size 50 x 50 x 6 mm of 50cm height including grouting in PCC (1:3:6) type C-1 and brick masonry platform 45cm high from ground level comprising with following complete all as specified:-(i) INCOMING : -(a) MCCB 250 Amp, 415 V, 35 KA, 4 pole Adjustable type-01 No.(b)Indicator with LED lamps for RYB , 3 Phase with MCBs set of three-01 set(c) Digital Ammeter (0-250)Amps - 01 Nos(d) Digital Voltmeter (0-500)Volts - 01 Nos(ii) OUTGOING : -(i) Bus bar strip, four pole and capacity 250 Amps aluminium,900mm length, coloured with plastic coated insulated and sleeves in four colours (Red, Yellow, blue and black ) fixed on porcelaininsulators with necessary nuts and bolts and washers etc |
| 97 | Supply, fabricate, install, connect, test and commissioning LT feeder pillar, powder coated, outdoor weather proof type, compartmentalised fabricated with3.15 mm thick CRCA steel and suitable sized pressed steel frame work, top with sloping canopy, bottom with detachable plates, front and rear with hinged type door and locking arrangements, chamber for cable entry and exit , chamber for copper bus bars, separate compartment for each switch gear,louvers and air vent for natural air flow, holes drilled for connection including suitable angle iron/flat iron frame work/ supports, excavation, earth work, PCC foundation etc., as required with and including following switch gear items internally connected with suitable capacity copper strip/ rods insulated, cable connector for incoming and all outgoing cables complete mounted on MS angle of size 50x50x5 mm, 600mm high complete all as specified and comprising of the followings:-(i) Bus bar strip, four pole and capacity 400 Amps copper, coloured with plastic coated insulated and sleeves in four colours (Red, Yellow, blue and black) fixed on porcelaininsulators with necessary nuts and bolts and washers etc (ii) INCOMING : -(a) MCCB 250 Amp, 415 V, 35 KA, 4 pole adjustable type -01 No.(b) Indicator with LED lamps for RYB, 3 Phase with MCBs set of three-01 set(c) Digital Ammeter (0-500) Amps(d) Digital Voltmeter (0-500) Volts(ii) OUTGOING : -(a) MCCB 63 Amp, 415 V, 16 KA, 3 pole fixed type -10 Nos |
| 98 | Material and labour in repairs Submain wiring with four run of FRLS PVC insulated unsheathed multistranded copper conductorsingle core 16 Sqmm drawn through in and including PVC rigid non metallic surface or concealed conduit including two run of earth continuitycopper conductor 16 Sqmm FRLS PVC insulated unsheathed multistranded copper conductor with green insulation including taking down existing unserviceable/burnt submain complete all as specified and directed. |
| 99 | Material and labour in repairs Submain wiring with four run of FRLS PVC insulated unsheathed multistranded copper conductorsingle core 25 Sqmm drawn through in and including PVC rigid non metallic surface or concealed conduit including two run of earth continuitycopper conductor 25 Sqmm FRLS PVC insulated unsheathed multistranded copper conductor with green insulation complete all as specified including taking down existing unserviceable/burnt submain.Note for Srl No. 98 & 99 :- Four Nos of 16.0/25.0 sqmm single core copper conductor and two run of earth conductor of same size through PVC non-metallic rigid conduit shall be measured as one RM complete all as specified and directed |
| 100 | Dismantling existing LT panel alongwith incoming and outgoing connections and refixing the panel in same place or in another place and connecting all cable connections including transportation complete all as specified and directed |
| 101 | Dismantling steel poles/struts, any size complete all as specified and directed. |
| 102 | Dismantling cross-arms of M.S. channel or angle sections, steel tubular poles etc. complete all as specified and directed.. |
| 103 | Dismantling insulators any type, any size complete all as specified and directed. |
| 104 | Dismantling stay assembly complete by demolition of concrete, etc. and necessary excavation all as specified and directed. |
| 105 | Dismantling of ACSR or AAC conductors complete all as specified and directed. |
| 106 | Material and labour in Replacement Earthing complete for Transformers/ LT Panels with galvanised steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground vertically at a depth not less than2.25 metres below normal ground level with top edge of the plate at a depth not less than 1.5 metres belownormalgroundlevel,connected with and including GI strip 32mm x 6mm upto test point and aluminium strip 25x3.15mm test point to equipment in andincluding GI pipe 40mm bore medium grade as protection pipe (from top of earth plate up to the body of equipment) by means of GI bolts, nuts, check nuts and washers of GI and thimbles, earth plate surrounded by packed layers of charcoal dust and common salt 15cm thick, all around includingtop and bottom and watering pipe 20mm bore of GI pipe light grade with funnel and wire mesh, PCC chamber of size 300 x 300 x 300mm (top of chamber minimum 15 cm above the normal ground level (1:3:6) using 20mm graded stone aggregate and RCC cover (1:2:4) type B-I using 20mm graded crushed stone aggregate and angle iron frame including necessary excavation/ earth work in any type of soil/rock, test point of GI strip and as shown in Electrical plate No. 3 of SSR Part-I (2009) testing on completion complete all as specified.(cost of protection pipe up to 7.5metres from earth electrode will be included in the unit rate quoted by the contractor) complete all as specified and directed. |
| 107 | Material and labour for Earth continuityconductor or main earth leadfixed on wall on batten or recess or chases or burried in groundor drawn in conduit / pipe or fixed to pole or any other indicatedas required on ground for 32x6 mm GI strip complete all as specified and directed. |
| 108 | Material and labour for Earth continuityconductor or main earth leadfixed on wall on batten or recess or chases or burried in groundor drawn in conduit / pipe or fixed to pole or any other indicatedas required on ground for 25x3.15mm aluminium strip complete all as specified and directed. |
| 109 | Material and labour for Earth continuityconductor or main earth leadfixed on wall on batten or recess or chases or burried in groundor drawn in conduit / pipe or fixed to pole or any other indicatedas required on ground for 8.00 SWG GI wire complete all as specified and directed. |
