Tamil Nadu Generation And Distribution Corporation Limited-TANGEDCO has published Tender For Overhauling Of 3 Nos.6.6 Kv, 230 Kw, 1486Rpm, Kirloskar Make Ht Ash Slurry Disposal Pump Motor Sl.No.3940207-2, 3940207-3 And 3940207-10 At Ahp / Nctps-I.. Submission Date for this Tender is 20-09-2023. Motor Work Tenders in Thiruvallur Tamil Nadu. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Disconnection of power cable Decoupling, releasing the motor from its bed, shifting to repair bay |
2 | Dismantling of the motor pulley, fan hub, end covers, cleaning and threading out the rotor. |
3 | Overhauling of coolers : Dismantling of the motor air cooler and Checking & Cleaning (Applicable for 230 KW motor) |
4 | Overhaul of Stator: Cleaning the stator windings, checking and tightening of loose wedges in the stator by inserting additional glass textolite liners and replacing all damaged wedges by new one and spraying one coat of Dr.BecK insulation varnish, drying out, & stator pre heating |
5 | Overhaul of Rotor: Cleaning & inspection of the rotor, checking the position of stampings, inspection of winding bars soldered end winding and spraying one coat of Dr.Beck insulation varnish in rotor and drying out. |
6 | Releasing the DE bearing Cleaning, checking and refixing with new one if found necessary of fixing the old bearings if found healthy. |
7 | Releasing the NDE bearings cleaning, checking and refixing with new one if found necessary or fixing the old bearings if found healthy. (Bearings Supplied by the TANGEDCO) |
8 | Assembling the motor after threading in the rotor, fixing end covers & pulley. |
9 | Providing rubber gasket and fixing cooler unit. (Applicable for 230 KW motor) |
10 | Labour charges for shifting the motor to its bed, connection of power cable, alignment, coupling, and trial run. |
11 | Charges for painting the motor with two coats DA grey /deep orange colour synthetic enamel paint. Total area of the motor is 18 sqm. |
12 | Provision of stator terminal take off leads for silicon cable. (Material Supplied by Contractor) |
13 | Supply and erection of stator terminal clamp |
14 | Transport from NCTSP-I site to company premises if required |
15 | Consumables & T&P |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail