Educational and Research Institute Statutory Bodies & Commissions/Committees Closing in 0 days TDR #39521069

Tender For Electronic Device And Circuit Lab Items

Issued by Statutory Bodies & Commissions/Committees · valangaiman, Tamil Nadu
Tender Value
Ref. Documents
Estimated cost
Bid Submission
13 Sep 2023
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
valangaiman → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Electronic Device And Circuit Lab Items , Vi Characteristics Of Pn Junction Diode Specification Built In 0-6V For Forward Bias And0-24V Power Supply For Reverse Bias To Carryout Forward And Reverse Vi Characteristics Of Pn Junction Diode Experiments Provision To Connect Desk Top Meters Externally, Wooden Closed Cabinet , Vi Characteristics Of Zener Diodespecification Built In 0-6V For Forward Bias And0-12V Power Supply For Reverse Bias To Carryout Forward And Reverse Vi Characteristics Of Zener Diode Experiments Provision To Connect Desk Top Meters Externally, Wooden Closed Cabinet , Half Wave And Full Wave Rectifier Without And With Filter Specification To Observe Variation In The Ripple With Load Current Without And With Filter To Observe Voltage Regulation With Load Current Without And With Filter Provision To Connect Necessary Desktop Meters Externally, Wooden Closed Cabinet , Bridge Rectifier Without And With Filterspecification To Observe Variation In The Ripple With Load Current Without And With Filter To Observe Voltage Regulation With Load Current Without And With Filter Provision To Connect Necessary Desk Top Meters Externally, Wooden Closed Cabinet , Input And Output Characteristics Of Ce Transistorspecification Built In 0-6V Power Supply In The Input Side And 0-24V Power Supply In The Collector Side To Carryout Input And Output Characteristics Of Transistor In Ce Configuration Experiments Provision To Connect Necessary Desk Top Meters Externally, Wooden Closed Cabinet , Jfet Characteristicsspecification Built In 0-6V Power Supply In The Input Side And 0-30V Power Supply In The Output Side To Carryout Drain Output Characteristics And Transfer Characteristics Of Jfet Experiments Provision To Connect Necessary Desk Top Meters Externally, Wooden Closed Cabinet , Ujt Characteristicsspecification Built In 0-12V Power Supply In The Input Side And 0-30V Power Supply In The Output Side To Carryout Emitter Characteristics Of A Ujt Experiment Provision To Connect Necessary Desk Top Meters Externally, Wooden Closed Cabinet , Scr Characteristics And Marking Important Parameters Specification Built In 0-12V Power Supply In The Input Side And 0-30V Power Supply In The Output Side Provision To Connect Necessary Desk Top Meters Externally To Carryout Experiment On Vi Characteristics Of Scr To Find Latching And Holding Currents Built In Power Supplies And Wooden Closed Cabinet , Diac And Triac Characteristics Specification Built In 0-6V Power Supply In The Input Side And 0-30V Power Supply In The Output Side For Triac Characteristics 0-45V Power Supply For Diac Characteristics Provision To Connect Necessary Desk Top Meters Externally To Carryout Vi Characteristics Of Diac And Vi Characteristics Of Triac Experiments , Astable And Monostable Multivibrators Using Transistorsspecification To Connectrc Values To Get Different Frequency In Astable Multivibrator To Connect Rc Values To Get Different Time Delay In Monostable Multivibrator Built In Power Supply And Wooden Closed Cabinet , Common Emitter Amplifierspecification To Study The Dc Conditions Of The Amplifier Circuit To Carry Out The Frequency Response Of The Circuit Provision To Connect Input Signal Externally And To Measure The Output Built In Power Supply And Wooden Closed Cabinet => Limited

BOQ

Name of Work: Electronic device and circuit lab items
Sl. No. Item Description
1VI Characteristics of PN Junction Diode SPECIFICATIONBuilt in 0-6V for forward bias and0-24V Power Supply for reverse biasTo carryout forward and reverse VI Characteristics of PN Junction diode experimentsProvision to connect desk top meters externally, Wooden closed cabinet
2VI Characteristics of Zener DiodeSPECIFICATIONBuilt in 0-6V for forward bias and0-12V Power Supply for reverse biasTo carryout forward and reverse VI Characteristics of Zener diode experimentsProvision to connect desk top meters externally, Wooden closed cabinet
3Half wave and Full wave Rectifier without and with filter SPECIFICATIONTo observe variation in the ripple with load current without and with filterTo observe voltage regulation with load current without and with filterProvision to connect necessary desktop meters externally, Wooden closed cabinet
4Bridge rectifier without and with filterSPECIFICATIONTo observe variation in the ripple with load current without and with filterTo observe voltage regulation with load current without and with filterProvision to connect necessary desk top meters externally, Wooden closed cabinet
5Input and output characteristics of CE TransistorSPECIFICATIONBuilt in 0-6V Power Supply in the input side and 0-24V Power Supply in the Collector sideTo carryout input and output characteristics of transistor in CE configuration experimentsProvision to connect necessary desk top meters externally, Wooden closed cabinet
6JFET CharacteristicsSPECIFICATIONBuilt in 0-6V Power Supply in the input side and 0-30V Power Supply in the output sideTo carryout drain output characteristics and transfer characteristics of JFET experimentsProvision to connect necessary desk top meters externally, Wooden closed cabinet
7UJT CharacteristicsSPECIFICATIONBuilt in 0-12V Power Supply in the input side and 0-30V Power Supply in the output sideTo carryout Emitter Characteristics of a UJT experimentProvision to connect necessary desk top meters externally, Wooden closed cabinet
8SCR Characteristics and marking important Parameters SPECIFICATIONBuilt in 0-12V Power Supply in the input side and 0-30V Power Supply in the output sideProvision to connect necessary desk top meters externallyTo carryout experiment on VI Characteristics of SCRTo find latching and holding currentsBuilt in Power Supplies and Wooden closed cabinet
9DIAC and TRIAC Characteristics SPECIFICATION Built in 0-6V Power Supply in the input side and 0-30V Power Supply in the output side for TRIAC Characteristics0-45V Power Supply for DIAC CharacteristicsProvision to connect necessary desk top meters externallyTo carryout VI Characteristics of DIAC and VI Characteristics of TRIAC experiments
10Astable and Monostable Multivibrators using TransistorsSPECIFICATIONTo connectRC values to get different frequency in Astable MultivibratorTo connect RC values to get different time delay in Monostable MultivibratorBuilt in Power Supply and wooden closed cabinet
11Common Emitter AmplifierSPECIFICATIONTo study the DC conditions of the amplifier circuitTo carry out the frequency response of the circuitProvision to connect input signal externally and to measure the outputBuilt in Power Supply and Wooden closed cabinet

AI Tender Summary

OUR REF NO 39521069
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE Ref. Documents
LAST DATE 13-09-2023
Authority
Authority Name Directorate Of Technical Education
Work Description Electronic Device And Circuit Lab Items , Vi Characteristics Of Pn Junction Diode Specification Built In 0-6V For Forward Bias And0-24V Power Supply For Reverse Bias To Carryout Forward And Reverse Vi Characteristics Of Pn Junction Diode Experiments Provision To Connect Desk Top Meters Externally, Wooden Closed Cabinet , Vi Characteristics Of Zener Diodespecification Built In 0-6V For Forward Bias And0-12V Power Supply For Reverse Bias To Carryout Forward And Reverse Vi Characteristics Of Zener Diode Experiments Provision To Connect Desk Top Meters Externally, Wooden Closed Cabinet , Half Wave And Full Wave Rectifier Without And With Filter Specification To Observe Variation In The Ripple With Load Current Without And With Filter To Observe Voltage Regulation With Load Current Without And With Filter Provision To Connect Necessary Desktop Meters Externally, Wooden Closed Cabinet , Bridge Rectifier Without And With Filterspecification To Observe Variation In The Ripple With Load Current Without And With Filter To Observe Voltage Regulation With Load Current Without And With Filter Provision To Connect Necessary Desk Top Meters Externally, Wooden Closed Cabinet , Input And Output Characteristics Of Ce Transistorspecification Built In 0-6V Power Supply In The Input Side And 0-24V Power Supply In The Collector Side To Carryout Input And Output Characteristics Of Transistor In Ce Configuration Experiments Provision To Connect Necessary Desk Top Meters Externally, Wooden Closed Cabinet , Jfet Characteristicsspecification Built In 0-6V Power Supply In The Input Side And 0-30V Power Supply In The Output Side To Carryout Drain Output Characteristics And Transfer Characteristics Of Jfet Experiments Provision To Connect Necessary Desk Top Meters Externally, Wooden Closed Cabinet , Ujt Characteristicsspecification Built In 0-12V Power Supply In The Input Side And 0-30V Power Supply In The Output Side To Carryout Emitter Characteristics Of A Ujt Experiment Provision To Connect Necessary Desk Top Meters Externally, Wooden Closed Cabinet , Scr Characteristics And Marking Important Parameters Specification Built In 0-12V Power Supply In The Input Side And 0-30V Power Supply In The Output Side Provision To Connect Necessary Desk Top Meters Externally To Carryout Experiment On Vi Characteristics Of Scr To Find Latching And Holding Currents Built In Power Supplies And Wooden Closed Cabinet , Diac And Triac Characteristics Specification Built In 0-6V Power Supply In The Input Side And 0-30V Power Supply In The Output Side For Triac Characteristics 0-45V Power Supply For Diac Characteristics Provision To Connect Necessary Desk Top Meters Externally To Carryout Vi Characteristics Of Diac And Vi Characteristics Of Triac Experiments , Astable And Monostable Multivibrators Using Transistorsspecification To Connectrc Values To Get Different Frequency In Astable Multivibrator To Connect Rc Values To Get Different Time Delay In Monostable Multivibrator Built In Power Supply And Wooden Closed Cabinet , Common Emitter Amplifierspecification To Study The Dc Conditions Of The Amplifier Circuit To Carry Out The Frequency Response Of The Circuit Provision To Connect Input Signal Externally And To Measure The Output Built In Power Supply And Wooden Closed Cabinet => Limited
Basic Detail
Tender No 4701/B2/2023
Bidding Type Tender
Location
City valangaiman
State Tamil Nadu
Key Dates
Publish Date 07 Sep 2023
Submission Date 13 Sep 2023
Open Date 14 Sep 2023
Finance
Tender Value Ref. Documents
Tender Fee Ref. Documents
EMD Ref. Documents
Exemption Not Available
Document List
81191aa2-cd52-48ed-aecc-70c729df078c.html
BOQ_438349.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Sep 07, 2023
11:30 IST

Tender Published

Tender notice published.

Completed
Sep 13, 2023
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Sep 14, 2023

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

81191aa2-cd52-48ed-aecc-70c729df078c.html

xls

BOQ_438349.xls

pdf

Tendernotice_1.pdf

TenderDetail
Loading tenders