|
| 1 | Earth work in excaviation in foundation trenches in ordinary soil (vide classification of soil item A) & disposal of excaviated earth as ovrained to a distance upto 50 mnincluding all lifts, levelling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approve design, building specification & direction of E/ incharge |
| 2 | Earth work in filling in sub floor trenches and plinth in layersnot exceeding 150 mm thick, well watered, rammed, fully conpared and fine dressed with earth obtained after cutting within lead of 50m and lift of 1.5m all completed as per direction of the E/I( mode of measurement compacted volume). |
| 3 | Providing coarse clean sand in filling in foundation trecches or in plinth including rammingamd watering in layers not exceeding 150mm. Thick with all leads and lifrs including cost of all materials, labours, royality and taxes all complete jobs as per building specification and direction of the E/I . ( mode of measurement compacted volume) |
| 4 | Providing degination 75A one brick flat soiling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of the E/I. |
| 5 | Providing and laying in position cement concrete of soecified grade excluding the cost the cost of centering and shuttering all work up to plinth level(1:2:4)M15 |
| 6 | Providing and laying in position reinforced cement concrete of soecified grade excluding the cost the cost of centering and shuttering all work up to plinth level(1:1.5:3)M20 |
| 7 | Providing cement concrete works in walls including attached pilasters butteress plinth and string courses fillets columns pillars piers abutment post and struts etc. above plinth level upto floor five level rxcluding cost of centering shuttering finishing and reinforcement: (1:1.5:3) M20 |
| 8 | Providing reinforcement concrete work in beam suspended floors roofs having slope upto 15 degree landing balcony shelves do.. Do.. As per E/I. (Rcc M20) |
| 9 | Providing reinforcement concrete work in beam suspended floors roofs having slope upto 15 degree landing balcony shelveschajja, lintels bands do.. Do.. As per E/I. (Rcc M20) |
| 10 | Providing reinforcement concrete work in beam suspended floors roofs having slope upto 15 degree landing balcony shelveschajja, lintels bands do.. Do.. As per E/I. (Rcc M20) |
| 11 | Providing reinforcement concrete work in beam suspended floors roofs having slope upto 15 degree landing balcony shelveschajja, lintels bands do.. Do.. As per E/I. (Rcc M20) |
| 12 | Reinforcement cement concrete work in beam suspended floorshaving slopes upto 15* landing balconiesshelves chajja litels bands plain window sills staircase and spiral stair cases above plinth level upto floor five levels exluding the cost of centering , shuttering finishing and reinforcement with 1:1.5:3. |
| 13 | Centering and shuttering including strutting propping etc . And removal of form for foundation, footing, base of column etc for mass concrerte. |
| 14 | Centering and shuttering including strutting propping etc . And removal of form for Column , pillars, piers,abutment, posts and struts. |
| 15 | Centering and shuttering including strutting propping etc . And removal of form for Lintels, beams, plinthbeams girdersbressumers and cantilevers.. |
| 16 | Centering and shuttering including strutting propping etc . And removal of form for suspended floors ,roofs landing, balconies and access platform. . |
| 17 | Centering and shuttering including strutting propping etc . And removal of form for weather shades, chajja,corbles including edges.. |
| 18 | Centering and shuttering including strutting propping etc . And removal of form for Stair . . |
| 19 | Providing desination 75A brick work in cement mortar (1:6) in foundaton & plinth with approved quality of clean coarse sand of F.M 2 including providing 10mm th.mortar joints cost of screning materials, racking out joints to 15mm depth, curing, taxes and royalty all complete as per build specification and direction of E/Incharge. |
| 20 | Providing and laying damp proof cource 50 mm thick with cement concrete 1:2:4 4 graded aggregate 20 mm nominal size. |
| 21 | Providing desination 75A brick work in cement mortar (1:6) in super structure with approved quality of clean coarse sand of F.M 2 including providing 10mm th.mortar joints cost of screening materials, racking out joints cost of screening materials, racking out joints to 15mm depth, curing, taxes and royality all complete as per build . specificationand direction of E/ in charge. |
| 22 | Providing and fixing fan hook of 16 mm dia M.S bar 1 metre long bent to required size and shape placed in position and fixed in R.C.C slab/ beam at the time of castin all complete as per building specification and diection of E/I.( where materials is nor supplied by deptt.) |
| 23 | Providing 6mm, cement plasters (1:4) in ceiling with clean coarse sand of F.M 1.5 including cost of carriage, screening , curing with all lead and lifts of water, scaffolding taxes and royalty all complete as per buiding specifications and diarection of the E/I. |
| 24 | Providing 12mm. Cement plaster (1:6)l with clean coarse sand of F.M .15. including cost of carriage, screening, curing with all lead and lifts of water,scaffolding, taxes and royalty all complete as per building specifications and direction of the E/I. |
| 25 | Supplying , fitting and fixing M.S grill made of 20 X 6mm. M.S flat/ square bars as per approved design & drawing, properly fibricated with joints contiuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I. DOOR AND WINOW |
| 26 | Supplying fitting and fixing 20 gauge GCI sheet gate fitted on Msangle frame of size 60 x 60 x 6 mm including cost of fabrication providing necessary lockingarrangement with haskal and dommy duly fixed in PCC (1:2:4 ) block of required sizeapplying apriming lead paint over steel work taxes all complete as per building specification and direction of E/I |
| 27 | Supplying fitting and fixing collapsible gate of approved size and make properly fabricated with vertical double channels 20x10x2 at 100 mm centres and braced with MS channels do… do… as per E/I. |
| 28 | Providing and laying polished vertified floor tiles in different sizes with water absorption less than 0.08% ……do…do as per e/I.(size of tiles 600x600mm) |
| 29 | Marble stone flooring with 18 mm thick marble stone as per sample of marble approved by engineer incharge. |
| 30 | Providing and laying 6mm precast white glazed tiles in wall over 12 mm cement mortar (1:3) and jointed wiyh grey cementslurry.(size 15x15cm) |
| 31 | Providing and applying plaster of paris of putty of 2 mm thickness over plastered surface to prepare the surface even and smooth do..do complete as per E/I. (Inner side plaster qty+cielling plaster qty) -6005.33 SFT INSIDE (LESS WALL TILES IN VERNADAH QTY-6357.00)= 5648.330 SFT |
| 32 | Providing and applying white cement based putty of average thickness 1mm of approved brand and manufacturedo..docomplete as per E/I. OUTSIE (OUT SIDE PLASTER QTY) = 3089.34 SFT |
| 33 | Finshig walls with premium acrylic smooth exterior paint with silicon aditives of required shade .(New work two or more coats applied . |
| 34 | Distempring with oil bound washable distemper of approved brand and manufacture to give an even shade: New work two or more coat. (As same qty OF INNER PLASTER.) |
| 35 | Providing Two coats of painting with ready mixed paint of approved shade and make over steel surface includingcleaning the surface throughly scaffolding and taxesall complete as per building specification and direction of E/I |
| 36 | Providing TMT reinforcement of following dia rods as per approved design…do….do as per E/I. |
| 37 | providing 150 mm wide brick drain in cement mortar (1:6) with av. 150 mm clear depth and 125 mm apron including cost of e/w involvedwith 75 mm cement concrete (1:4:8) over one brick designation 100A flat soling …do..do.. |
| 38 | Making soak pit 2.5 m diametre 3.00 M deep. |
| 39 | Making plith protection 50 mm thick of cement concrete 1:3:6 over 75 mm thick bed of dry brick blast do.. Do as per E/I. |
| 40 | Providing and fixing stainless steel railing made of hollow tibes chanels plates etc including all cost. |
| 41 | Carriage of Materils:-(a) cementlead 10 km |
| 42 | (b) sand lead 8 km |
| 43 | ©stone chips 20 km |
| 44 | (d)Bricks 10 km |
| 45 | (e)Steel 10 km |
| 46 | Point wiring in PVC conduit with piano type switch Wiring for light point /call bell point / exhaust fan point with 1.5 sqmmFRPVC insulated coper conductor single core cable in surface / recessed PVC conduit with paino type switch phenolic laminated sheet with suitable size of Msbox and erthing the point with 1.5 sq mm FRPVC insulated copperconductore single core cable etc as required(Group A) |
| 47 | Twin control point wiring in PVC conduit, with piano type switch -Wiring for Twin Control light point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, 2 way paino type switch, phenolic laminated sheet, suitable size PVC/G.I. box etc. as required. |
| 48 | power plug Wiring in pvc conduit 2x4 sq mm wiring for light /power plug with 2x4 sq mm frpvc insulated copper conductor single core cable for loop earthing as required. |
| 49 | Wiring fpr circuit /submain wiring along with earth wire the following sizes pvc isulated copper conductor single core cable in surface pvc conduit.2x2.5 sqmm +1x2.5 sqmm earth wire. |
| 50 | 2x4.0 sqmm 1x4.0 sqmm earthwire. |
| 51 | Supplying and fixing following piano type switch/socket obn the existing switch box/cover including connections etc. as required.5/6 amps, one way switch |
| 52 | 3 pin 5/6 a,ps. Socket outlet |
| 53 | Electronic step fan Regulator Deluxe |
| 54 | S/F light plug point with piano type accessories - Supplying and fixing suitable size G.I./PVC box on surface or in recess with phenolic liminated sheet cover in front including providing and fixing 5 pin, 5/6 amps socket outlet and 5/6 amps piano tyep switch connection, painting etc. as required. |
| 55 | Supplying and fixing suitable size G.I./PVC box on surface or in recess with phenolic liminated sheet cover in front including providing and fixing 6 pin, 15/16 amps socket outlet and 15/16 amps piano type switch connection, painting etc. as required. |
| 56 | Supplying and fixing 3 pin 5 amp. Ceiling rose on the existing junction box/wooden block including connection etc. as required |
| 57 | Supplying and fixing batten/angle holder including connection etc. as required |
| 58 | installation. Testing and commissioning of ceiling fan including wiring the dwon rods of standardlength upto 30 cm with 1.5 sq mm frpvc insulated…do… do as per E/I. |
| 59 | Supply of exhaust metal fan 400 mm (16\")supply and fitting of 400 mm 200 v Ac metal exhaust fan. |
| 60 | Providing and fixing of 1200mm ceilling fan(c.g/ eqv.) |
| 61 | Providing and fixing following capacity double pole/ TP & N sheet metal switch disconnector fusen unit in existing metal with rewireable type fuses, including drilling holes in metal board, making connections, etc. as required.32 ampTP&N |
| 62 | LED bulb 9w/10w supply and fixing of LED 9w/10w bulb and accessories as required. |
| 63 | LED Tube with batten 20w/22w supply and fixing of wall mounted LED 20 w /22w tube + batten and electronic driver and accessories as required. |
| 64 | Supplying and fixing following way single pole neutral, sheet, MCB disrtibution board, 240 volts, on surface/recess, complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (But without MCB/RCCB/Isolator) |
| 65 | Providing and fixing C.P Brass bib cock of approved quality confirming to IS : 8931 - 15 mm dia nominal bore approved brand CP fittings. |
| 66 | Providing and fixing G.M. non-return valve Horizontal/Vertical type of approved quality as per specification and direction of Engineer-in-charge:- (a) Horizontal 20 mm dia |
| 67 | (b) horizontal 25 mm dia |
| 68 | (c ) Horizontal 32 mm dia |
| 69 | Providing and fixing Gun metal full way valve of approved quality all complete as per specification and direction of E/I.(a)20 mm dia |
| 70 | (b) 25mm dia |
| 71 | © 32 mm dia |
| 72 | Cutting chajja or cornice for laying G.I. pipe and restoring the same with R.C.C. (1:2:4) brick work in cement mortar (1:4) and cement plaster (1:4) as per specification and direction of Engineer-in-charge. |
| 73 | Making holes in walls for laying G.I. pipes and restoring the same after pipe laying as per specification and direction of E/I.(a) 125mm thick wall. |
| 74 | (b) 250mm thick wall |
| 75 | (c)Supplying, fitting and fixing the following items complete with all materials as per specification and direction of E/I.(a)Glass shelf with C.P. brass rail - 450mm x 125mm |
| 76 | (b)Mirrors of 6mm thick plate glass bevelled edge mirror including C.P. brass revolving fittings 3mm ply wood board and C.P. hinges to fix with mirror - 450mm x 600mm |
| 77 | (c)C.P. brass towel rail 20mm x 600mm with bracket container |
| 78 | (d)C.P. brass soap dish container medium quality with screw and hinges etc. |
| 79 | Supplying, fitting and fixing viterous white glazed earthen ware I.W.C. of parry Hindustan or any other I.S.S. approved make with 100mm H.C.I. \"p\" trap 15 litres C.I. pull and let go flushing cistern of names or other I.S.S. equivalent make, complete with all fittings, C.I. or C.C. brackets 32mm alkathene/P.V.C. telescopic flush, pipe about 2M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pair of viterous white glazed earthenware footrest to be fixed in floor 15mm C.I. body brass spindle stop cock of weight not less than 50grms, 15mm P.V.C. connection pipe 450mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and dirction of E/I.580mm long - With 12.5 liter low level PVC cistern |
| 80 | Supplying fitting and fixing viterous white glazed earthen ware wash hand basin of parry or Hindustan or any other I.S.S. approved make supported on painted C.I. or R.S. brackets 32mm C.I. brass waste, 15mm dia C.I. body brass spindl stop cock approved quality of weight not less than 30 grams, 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/I. |
| 81 | Earthwork in excavation for laying of different types and sizes of R.c.c. spun pipe with disposal of excavated earth within initial lead and sizes of R.c.c spun pipe with disposal of excavated earth within initial lead and lift as per E/I. |
| 82 | Providing and placing on terrace (at all floor levels) polyethylene waterstoragetank,ISI:12701marked,withcoverandsuitablelocking arrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank. |
| 83 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall25mm nominal outer dia pipe |
| 84 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall32 mm nominal outer dia pipe |
| 85 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.15 mm nominal outer dia Pipes |
| 86 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.20 mm nominal outer dia Pipes |
| 87 | Providing and fixing PTMT grating of approved quality and colour. C.P. Gratings - Circular type - 100mm dia |
| 88 | Providing and fixing PVC pipe fittins with all accessories.110mm door tee Pvc. |
| 89 | 110mm plain bend Pvc |
| 90 | 110mm door bend Pvc |
| 91 | 110mm 45 degree offset Pvc |
| 92 | 110 mm cowel |
| 93 | 110 mm P trap |
| 94 | 110 mm plain floor trap |
| 95 | S/f hallogen light |
| 96 | Providing and fixing on wall face unplasticised rigid pvc rain water pipessingle socketed pipes 110 mm dia. |
| 97 | HYDT: of drilling 200 mm x165mm x125 mm meter deep bore well in all kinds of soil and rock in rural area for installation of pump set with hydraulic DTH rig machine , all complete including supplying all materials , tools drilling rig , air compressor and equipments, as well as fuel lubricants and cost of transportation rig machine and other vechiles up to the site (a) 0.00 M to 50.00 M below GI |
| 98 | (b) 51.00 M to 200.00 M |
| 99 | Supplying assembling lowering and fixing in vertical position in borewell unplasticized PVC medium well casing pipe of required diaconfirming to IS. 200 mm dia. |
| 100 | development of tube well in accordance with ISto establish maximum rate do…do.. As per E/I. |
| 101 | Supplying and fitting MS Cap over 200 mm dia casing pipe all complete job as per direction of E/I |
| 102 | submersible pump 100 mm dia(with bronz impeller upto 20 stage) :- 2.00 H.P. |
| 103 | Supplying fully automated star delta starter to operate induction motor working on 415 v, 3 phase 50 hz with no volt coil over load element ON-OFF. |
| 104 | Supplying laying joining & connecting 4mm flat copper cable of inolex/levels make including all taxes, royalty etc. all complete job as per direction of E/I |
| 105 | Supplying and fitting MS clamp all complete job as per direction of E/I |
| 106 | Supplying and laying/lowering of GI pipe of 50 mm dia including of required fittings, solvent etc. complete job as per direction of E/I. |
| 107 | EARTH WORK INEXCAVATION IN FOUNDATION Trenches in ordinary soil (vide classification of soil item -A) and disposal of excavated earth as obtained to a distance up to 50 M including all lift, leveling ramming the foundation trenches, removing roots of tree shrubs all complete as per approved design, building specification and direction of E/I. |
| 108 | Providing coarse clean local SAND IN FILLING in foundation trenches or in plinth including ramming and watering in layer not exceeding 150 mm thick with all leads and 1.5 M lifts including cost of all materials, labours, royalty and taxes all complete as per building specification and direction of Engineer In charge (Mode of measurement compacted volume) |
| 109 | Providing designation 75-A, BRICK FLAT SOLING joints filled with local sand including cost of watering, taxes and royalty all complete as per building specification and direction of Engineer In charge |
| 110 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work upto plitnth level PCC M15(1:2:4). |
| 111 | Providing designation 75A brick work in C.M. (1:4) in foundation & plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm. thick mortar joints, cost of screening materials raking out joints to 15mm depth , curing, taxes & royalty all complete as per building specification & direction of E/I. |
| 112 | Providing 12mm cement Plaster (1:3) with clean coarse sand of F.M.1.5 with floating coat of neat cementin DADO including rounding of junctions with floor, curing, taxes and royalty all complete as per building specification and direction of E / I. |
| 113 | Providing R.C.C. M-20 with normal mix of 1:1.5:3 in ROOF SLAB with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening shuttering, mixing cement concrete in mixer, placing in position vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/I. |
| 114 | Providing R.C.C. M-20 with nominal mix of 1:1.5:3 in LINTEL with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening shuttering, mixing cement concrete in mixer, placing in position vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all comple as per building specificationand direction of E/I. |
| 115 | ProvidingT.M.T. Reinforcementoffollowing dia Rods as perapproved designand drawing includingcarriage of M.S. Rods of (Straightorin coils)to worksite, cutting, bendingandbinding with annealedwirewithcostofwireremoval ofrustplacingtherods in position all complete as perbuilding specification and direction and direction of E/I. |
| 116 | Supplying and fixing C. I. Cover without frame for MANHOLE 560MM DIA C.I. COVER (HEAVY DUTY) |
| 117 | CARRAIGE OF MATERIALSA)SAND |
| 118 | B)STONE CHIPS , |
| 119 | C) CementLead |
| 120 | D) BRICKS |
| 121 | E) STEEL |
| 122 | Add Gst 18% |
| 123 | Add Gst1% |
