Tender For Extension Of Fiac, R. Udayagiri, Gajapati District, rayagada-Odisha

Tender For Extension Of Fiac, R. Udayagiri, Gajapati District--- 1 Excavation of foundation in hard soil within 50 m initial lead and 1.5 m initial lift including rough dressing and levelling as per the direction of engineer in charge 2 Filling foundation and plinth with sand well rammed including cost and conveyance of materials. 3 C.C.(1:4:8) with 4 c.m. size h.g. metal in F&P. 4 C.C.(1:2:4) with 12 mm. size h.g. chips in F&P. 5 Brick work with Fly Ash Brick having crushing strength not less than 75 Kg/cm2 with dimensional tolerance ± 8 percent in cement mortar (1:6) in 6 (a) foundation and plinth 7 (b) superstructure in ground floor 8 (c) superstructure in first floor 9 Brick work with Fly Ash Brick having crushing strength not less than 75 Kg/cm2 with dimensional tolerance ± 8 percent in cement mortar (1:4) in septic tank. 10 (a) foundation and plinth 11 R.C.C. workofM-20 grade with 20mmand down grade black hard granite (crusherbroken) stone chips including hoisting and laying in ground floor 12 (a) Column base, frustum, plinth band 13 (b) Bed Block 14 (c) Lintel 15 (d) Column and beam 16 (e) Sun shade, loft and Chajja 17 (f) Roof Slab 18 (g) Stair 19 R.C.C. workofM-20 grade with 20mmand down grade black hard granite (crusherbroken) stone chips including hoisting and laying in first floor 20 (a) Bed Block 21 (b) Lintel 22 (c) Column and beam 23 (d) Sun shade, loft and Chajja 24 (e) Roof slab 25 Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification in 26 (a) ground floor 27 (b) first floor 28 2.5 cm thick grading concrete (1:2:2) on roof slab with 6 mm size hard granite chips on new work 29 (a) ground floor 30 (b) first floor 31 16 mm thick cement plaster in c.m(1:6) over brick masonry, outer walls in 32 (a) ground floor 33 (b) first floor 34 12 mm thick cement plaster in c.m(1:6) over brick masonry, inside walls in 35 (a) ground floor 36 (b) first floor 37 12 mm thick cement plaster in c.m(1:4) over RCC work and brick masonry in septic tank 38 6mmthickcementplasterincm(1:4),finishedsmooth including closed deep chiping and slurry treatment 39 (a) ground floor 40 (b) first floor 41 Finishing wall surface with Acrylic wall putty (Water based) of approved make and finished smooth and even in 42 (a) ground floor 43 (b) first floor 44 Primimg one coat with any approved primer over wall surface including cost of primer in 45 (a) ground floor 46 (b) first floor 47 Distempering two coats to walls with distemper of approved shade on new work to give an even shade including cost of distemper in 48 (a) ground floor 49 (b) first floor 50 Finishing exterior walls with weather coat of approved shade two coats on new work to give an even shade including cost of paint 51 (a) ground floor 52 (b) first floor 53 Fixing of Vitrified (60 cm x 60 cm plain /ivory) in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete including cost of tiles. 54 (a) ground floor 55 (b) first floor 56 Fixing of ceramic glazed tiles 30cmx20cm/20cmx20cm special plain/printed series in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete including cost of tiles 57 (a) ground floor 58 (b) first floor 59 Fixing of Vitrified tiles 60 cm x 60 cm (plain / ivory) series in dado, skirting and risers of steps on 12mm thick cement plaster in mortar (1:3) joined with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles per 1 sqm. 60 (a) ground floor 61 (b) first floor 62 Fixing of ceramic tiles in dado, skirting and risers of steps on 12mm thick cement plaster in mortar (1:3) joined with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles per 1 sqm. 63 (a) ground floor 64 (b) first floor 65 Supplying, fitting, fixing up window (sliding type) made up of Aluminium section 151-154, 151-155 as window frame section; No 151-155, 151-153, and 151-167 as shutter frame with 5 mm thick black glass as panel fitted with rubber bending including locking arrangement and all fittings including cost of all materials, taxes, labour, T&P complete 66 Providing, fitting and fixing of Al door with OEL anodized Al door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member and 12 mm prelaminated board fixed on door frame by means of tapered clip No 4660 and the frame to be completed by means of jointing angle No 1855 including all cost of labour, T&P, hire charges of drilling machine, labour charges etc complete. 67 Providing, fitting and fixing up partition walling (Fixed Glazed) with OEL Aluminium anodized section No, 9210 and 9207 as single groove and double groove respectively as horizontal and vertical member and OEL section 4660 as taperedclip for fixing up 6 mm thick glass and jointing angle no, 1855. 68 Supply, fitting and fixing of MS grill and ventilators including painting two coats over a coat of primer including cost of transportation. 69 Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm 70 10 cm thick dry brick khoa backing in soakpit. 71 Filling F&P with excavated earth, ramming and shaping into proper shape 72 Electrification charges 73 PH and Sanitary works

INR 6000 /-

INR 18083.0 /-

INR 18.08 Lakhs /-

Name of Work: Extension of FIAC, R. Udayagiri, Gajapati District

Sl. No.	Item Description
1	Excavation of foundation in hard soil within 50 m initial lead and 1.5 m initial lift including rough dressing and levelling as per the direction of engineer in charge
2	Filling foundation and plinth with sand well rammed including cost and conveyance of materials.
3	C.C.(1:4:8) with 4 c.m. size h.g. metal in F&P.
4	C.C.(1:2:4) with 12 mm. size h.g. chips in F&P.
5	Brick work with Fly Ash Brick having crushing strength not less than 75 Kg/cm2 with dimensional tolerance ± 8 percent in cement mortar (1:6) in
6	(a) foundation and plinth
7	(b) superstructure in ground floor
8	(c) superstructure in first floor
9	Brick work with Fly Ash Brick having crushing strength not less than 75 Kg/cm2 with dimensional tolerance ± 8 percent in cement mortar (1:4) in septic tank.
10	(a) foundation and plinth
11	R.C.C. workofM-20 grade with 20mmand down grade black hard granite (crusherbroken) stone chips including hoisting and laying in ground floor
12	(a) Column base, frustum, plinth band
13	(b) Bed Block
14	(c) Lintel
15	(d) Column and beam
16	(e) Sun shade, loft and Chajja
17	(f) Roof Slab
18	(g) Stair
19	R.C.C. workofM-20 grade with 20mmand down grade black hard granite (crusherbroken) stone chips including hoisting and laying in first floor
20	(a) Bed Block
21	(b) Lintel
22	(c) Column and beam
23	(d) Sun shade, loft and Chajja
24	(e) Roof slab
25	Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification in
26	(a) ground floor
27	(b) first floor
28	2.5 cm thick grading concrete (1:2:2) on roof slab with 6 mm size hard granite chips on new work
29	(a) ground floor
30	(b) first floor
31	16 mm thick cement plaster in c.m(1:6) over brick masonry, outer walls in
32	(a) ground floor
33	(b) first floor
34	12 mm thick cement plaster in c.m(1:6) over brick masonry, inside walls in
35	(a) ground floor
36	(b) first floor
37	12 mm thick cement plaster in c.m(1:4) over RCC work and brick masonry in septic tank
38	6mmthickcementplasterincm(1:4),finishedsmooth including closed deep chiping and slurry treatment
39	(a) ground floor
40	(b) first floor
41	Finishing wall surface with Acrylic wall putty (Water based) of approved make and finished smooth and even in
42	(a) ground floor
43	(b) first floor
44	Primimg one coat with any approved primer over wall surface including cost of primer in
45	(a) ground floor
46	(b) first floor
47	Distempering two coats to walls with distemper of approved shade on new work to give an even shade including cost of distemper in
48	(a) ground floor
49	(b) first floor
50	Finishing exterior walls with weather coat of approved shade two coats on new work to give an even shade including cost of paint
51	(a) ground floor
52	(b) first floor
53	Fixing of Vitrified (60 cm x 60 cm plain /ivory) in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete including cost of tiles.
54	(a) ground floor
55	(b) first floor
56	Fixing of ceramic glazed tiles 30cmx20cm/20cmx20cm special plain/printed series in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete including cost of tiles
57	(a) ground floor
58	(b) first floor
59	Fixing of Vitrified tiles 60 cm x 60 cm (plain / ivory) series in dado, skirting and risers of steps on 12mm thick cement plaster in mortar (1:3) joined with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles per 1 sqm.
60	(a) ground floor
61	(b) first floor
62	Fixing of ceramic tiles in dado, skirting and risers of steps on 12mm thick cement plaster in mortar (1:3) joined with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles per 1 sqm.
63	(a) ground floor
64	(b) first floor
65	Supplying, fitting, fixing up window (sliding type) made up of Aluminium section 151-154, 151-155 as window frame section; No 151-155, 151-153, and 151-167 as shutter frame with 5 mm thick black glass as panel fitted with rubber bending including locking arrangement and all fittings including cost of all materials, taxes, labour, T&P complete
66	Providing, fitting and fixing of Al door with OEL anodized Al door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member and 12 mm prelaminated board fixed on door frame by means of tapered clip No 4660 and the frame to be completed by means of jointing angle No 1855 including all cost of labour, T&P, hire charges of drilling machine, labour charges etc complete.
67	Providing, fitting and fixing up partition walling (Fixed Glazed) with OEL Aluminium anodized section No, 9210 and 9207 as single groove and double groove respectively as horizontal and vertical member and OEL section 4660 as taperedclip for fixing up 6 mm thick glass and jointing angle no, 1855.
68	Supply, fitting and fixing of MS grill and ventilators including painting two coats over a coat of primer including cost of transportation.
69	Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm
70	10 cm thick dry brick khoa backing in soakpit.
71	Filling F&P with excavated earth, ramming and shaping into proper shape
72	Electrification charges
73	PH and Sanitary works