|
| 1 | Thermocouple INSERTL = 465 mm For HP OUTER CASING |
| 2 | ‘J’ Type Thermocouples for Stage-I |
| 3 | Thermocouple for Flue gas Temp, IL / EL = 1200 / 400 mm |
| 4 | ‘J’ Type Thermocouples for Stage-I |
| 5 | Thermocouple DRB200L = 6000 mm For Bearing Temperature |
| 6 | K-TYPE THERMOCOUPLE FOR FLUE GAS MM/ EXT LENGTH - 150MM/1250MM |
| 7 | Thermocouple for HP Casing (TSE) |
| 8 | Thermocouple for Mill bearing temp. without Thermowell for stage-I |
| 9 | Thermocouple TYPE-AL = 6000 mm For HP/IP TOP/BOTTOM CASING |
| 10 | Thermocouple TYPE –A L = 465 mm for HP OUTER CASING |
| 11 | Thermocouple TYPE –B L = 515 mm For HP Outer casing inlet section |
| 12 | Mill fire protection thermocouple with thermowell for Unit 5,6 &7 IL-127MM |
| 13 | Thermocouple INSERTL = 515 mm For HP OUTER CASING INLET SECTION |
| 14 | CAPILLARY TYPE CR/AL \"K\" T/C, FOR METAL TEMP. SHEATH LENGTH :-16000MM(16MTR) |
| 15 | IP Inner Casing Thermocouple U#5,6&7 |
| 16 | K- TYPE THERMOCOUPLE FOR FLUE GAS CROMAL-ALUMELIMM/ EXT LENGTH 100/400MM |
| 17 | K\"- Type thermocouple for flue Gas, Immersion Length- 1000 mm Ext. Length -150mm/1000 mm |
| 18 | CAPILLARY TYPE CR/AL \"K\" T/C, FOR METAL TEMP. SHEATH LENGTH: 25000MM(25MTR) |
| 19 | CAPILLARY TYPE CR/AL \"K\" T/C, FOR METAL TEMP. SHEATH LENGTH: 12000MM(12MTR) |
| 20 | T/C Assembly type ‘J’ (Fe- Cu Ni) (Screwed Connection Type) for Classifier O/L Temp. of U#6&7 EL/IL:-160/400 |
| 21 | T/C K-Type (Cr/AL) Duplex, with Flanged Connections: for Secondary Air System of U#5,6&7.El/IL:- 300/800 mm |
| 22 | T/C K-Type (Cr/AL) Duplex, with Flanged Connections: for by pass temp. and PA temp of Mills of U#5,6&7.El/IL:- 160/400 |
| 23 | T/C K-Type (Cr/AL) Duplex, with Screwed Connections (High Pressure) for Stm. temp. Before and After Desuperheater of U#5,6&7.El/IL:- 6000/200 mm |
| 24 | T/C K-Type (Cr/AL) Duplex, with Screwed Connections (High Pressure) for CRH Stm. temp. of U#5,6&7.El/IL:- 160/160 mm |
| 25 | T/C K-Type (Cr/AL) Duplex, with Screwed Connections (High Pressure) for HRH Stm. temp. of U#5,6&7.El/IL:- 200/300 mm |
| 26 | T/C K-Type (Cr/AL) Duplex, with Screwed Connections (High Pressure) for Main Stm. temp. at SH-14 O/L (L) &(R) of U#5,6&7.El/IL:- 200/200 mm |
| 27 | TC for Mill Inlet Temperature |
