Tender For Renovation/ Strengthening Of Electrical Wiring With Other Allied Works At Eph Okhla. (Re-Invite)
Tender Value
Ref. Documents
Estimated cost
Bid Submission
12 Sep 2023
0 days left
EMD
8600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
okhla → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Renovation / Strengthening Of Electrical Wiring With Other Allied Works At Eph Okhla. ( Re-Invite )
BOQ
| Sl. No. | Item Description |
| 1 | Supply of Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack. 18 W LED 6000 K, LED Tube Light, Lamp Type Order, DJB Approved. SOR 19.1.1 DJB E&M |
| 2 | Wiring for light point/ fan point/ exhaust fan point/call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface /recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required, Group A. SOR 31.8.1 DJB E&M |
| 3 | Supply of 6 Pin 15/16 A socket outlet, DJB Approved SOR 31.23.5 DJB E&M |
| 4 | Supply of 3 Pin 5/6 A socket outlet, DJB Approved SOR 31.23.4 DJB E&M |
| 5 | Supply of15/16 A switch, DJB Approved SOR 31.23.3 DJB E&M |
| 6 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as Required, 20 mm. SOR 31.21.1 DJB E&M |
| 7 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block includingconnections etc. As required, DJB approved SOR 31.33 DJB E&M |
| 8 | Providing and fixing following capacity TP&N dis-connector fuse switch unit inside the existing panel board with ISI marked HRC Fuses including drilling holes in cubicle panel, making connections, 32 A etc. as required, Make: L&T/Havells/ABB/DJB Approved. SOR 32.1.1 DJB E&M |
| 9 | Supply of Ceiling fan 1400 mm. ISI standard SOR 20.1.3 DJB E&M |
| 10 | Supply of air circulator fan sweep size 600 mm 100 watt, 230 watt. ISI standard SOR 20.3.2 DJB E&M |
| 11 | Supply of Heavy Duty Exhaust fan (900/1440 RPM), 380 mm, ISI Standard SOR 20.2.2 DJB E&M |
| 12 | Supply of MCCB with thermo magnetic release and terminal providing and fixing following rating and breaking capacity and spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, 100 A, 16 KA, TP MCCB, etc. asrequired. Make :- Havells/C&S/L&T /DJB Approved SOR 32.2.1 DJB E&M |
| 13 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator), 4way(4+12),Double door SOR 32.4.1 DJB E&M |
| 14 | Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required 2X2.5sq.mm+1 X2.5sq.mm earth wire SOR 31.7.2 DJB E&M |
| 15 | Wiring for circuit/sub main wiring along with earth wiring with the following size sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required.2x1.5sq.mm+1 x1.5sq.mm earth wire SOR 31.7.1 DJB E&M |
| 16 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Triple pole and neutral SOR 32.10.5 DJB E&M |
| 17 | Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep SOR 31.50.1 DJB E&M |
AI Tender Summary
Tender Timeline
Sep 05, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedSep 12, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 12, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender