Name of Work:Supply and Installation of 10 No. Solar Street Lights at Road which connects NHAI- 31D to Belacoba PWD Road
Sl. No.
Item Description
1
Supply & Fixing of All in One (Stand alone) 2200 Lumens Solar Street Light Luminaire IP-65 ingress protection with minimum 160 Lumens per watt Output having Lithium Ferro Phospate (LiFePo4) battery conforming to technical specification & latest accreditation. The LED should be warranted for 3 Years. (Make: Phillips. Model : BRP710 LED 22 CW MR S1 12V LFP AIO Solar Equip IN or equivalent model of Syska / Bajaj / Crompton or any reputed make.)
2
Supplying and fixing Street light bracket made of GI pipe50 mm dia 1.00 Mtr long suitable for PCC pole for mounting of street light luminaire, I/c necessary holding clamps made by MS flat ( The bracket must be of an angle of 100 - 105 degree with the pole) i/cone coat of red oxide primer and as per approved drawing as reqd.
3
Supplying & Delivery of6 Mtr Metallic street light standard pole made of 3 meters long 100 mm. dia & 3 Mtr Lg 80 mm diaMS pipe medium class. ISI markedwith 100/80 mm reducer and welded ofMS base plate of (300mm X 300 X 6 mm) thick with earthing stud etc. as reqd. (Make:- Bansal - Utkarsh/ Zindal/ National)
4
Erection of Single Steel tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properly: Upto 9.0 mtr. Size 0.6x0.6x1.70 mts
5
Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint (Upto 9.0 mtr. long pole) : One coat of red lead/Zinc chromate priming
6
1st coat of synthetic enamel paint over the primer
7
2nd coat of synthetic enamel paint over the 1st coat
8
Supply and errection of M.S Sign Board (1500mm x 900 mm) with necessary lettering etc. complete. Fabrication and errection of the board to be done with M.S angles such as, frame (25x25x5 mm), M.S sheet of 0.5 mm thick & Posts with M.S angles (50x50x6 mm) section at a clear hight of atleast 2.5 mtr above ground level. Fixing of the complete board with necessary information as per relavent and updated G.O, has to be carried out by digging holes (0.6x0.6x0.6 mtr) in all sorts of soil and packing the M.S angle posts with cement concrete (1:3:6) of section( 0.45x0.45x0.90 Mtr) and filling the gaps with the excavated earth including priming and 2 coats of painting on both sides complete in all respect as per direction of the E-I-C. (size should not be more than 5\" x 3\"= 15 Sq. Ft.) = 01 (One) Nos.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
