|
| 1 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth etc. complete. |
| 2 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work at boundary wall grills |
| 3 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete, Fixed to openings /wooden frames with rawl plugs screws etc. |
| 4 | Diluting and injecting chemical emulsion for POST CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.: with Chloropyriphos/ Lindane E.C. 20% with 1% concentration |
| 5 | Electrification of toilet unit, drinking water facilities, and and ticket counter at site with all complete as per specifications below.Providing, laying & fixing 10 mm sq 3 core aluminum armor cable- 50 RMT.Providing & fixing Ceiling fan – 1.00 Nos.Providing & fixing LED Light 14 watt-10.00 Nos.Providing & fixing street light 30 Watt -2.00Nos.Inverter 900 KVA With battery & installation-1.00 No.Providing & fixing 1 mm coil-2.00 Nos.Providing & fixing Switch 5 Amp – 10 Nos.Providing & fixing MCB 32 Amp-5.00 Nos.Providing & fixing Socket 5 Amp -5.00 Nos.Providing & fixing electric board with cover 8\" x 4\"- 5.00 Nos.Repair of submersible motor – 3.00 Nos. |
| 6 | Providing and fixing of plumbing & sanitary articles with all complete as per following specifications.Providing & fixing 40 mm HDPE Pipe – 180 RMTOverhead tank 1000 ltr. of approved brand – 1.00 No.Providing & fixing Tap -10.00 Nos.Providing & fixing angle cock – 10.00 nos.Providing & fixing stop cock – 10.00 Nos.Cleaning of chamber, pipe line & septic tank – 1.00 LSFitting & fixtures like tee, elbow, union etc. – 1.00 LS |
| 7 | Providing & fixing of 80 ltr. Capacity water cooler of approved manufacturer with U/V Filter with all complete |
| 8 | Petty scientific repair wherever required only as per the direction of Archaeological officer in-charge for taking out dead & decayed, salt eaten brick work, cleaning & disposal of fallen materials and stacking of serviceable materials and disposal of unserviceable material with cost of labour & T & P etc. all complete |
| 9 | Provision of under pinning of ancient brick work (35- 36x25-26x5-6 cm) with lime surkhi mortar in 1:1:1 mix (1 lime :1 surkhi :1 fine sand)and molasses including cost of material, labour T&P etc. all complete. (using old collected bricks only) |
| 10 | Provision of water tightening and pointing of structures with lime surkhimortar in 1:1:1 (1 lime : 1 surkhi : 1 find sand) mix withmolasses in proportionate ratio with cost of material, labour and T& P all complete. |
| 11 | Provision for lime concrete in 1:1:1 (1lime: 1surkhi: 1sand:) mixing with 20-25 mm brick ballast mixed with molasses in appropriate proportion as apron to check out rain water from all around area with all complete |
| 12 | Provision and providing for the stone signage of approved drawing and design inside the complex with all complete |
| 13 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm/ m² |
| 14 | Earth work in excavation by manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m |
| 15 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. Complete all as per direction of Engineer-inCharge 60mm thick cement concrete paver block of M35 grade with approved colour, design & pattern |
| 16 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size In cement mortar with all complete |
| 17 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm |
| 18 | Raking out joints of stone masonry surface to the required width and depth, with due care and precaution, by mechanical / manual means, including preparing and cleaning the surface for re-pointing/ refilling of joints, including disposal of rubbish to the dumping ground within 50 metre lead. |
| 19 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete |
| 20 | Demolishing brick work manually including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge |
| 21 | Supplying and fixing of Stainless Steel (S.S) boards for existing excavated remains and direction boards. Approved drawing, design and texts to be obtained before execution of this work |