Modified Sag Mill Discharge End Liners, Modified Sag Mill Discharge End Liners 40, With Necessaries Hardware, A. Pos Y-Type - 10 Nos Discharge Grate -Intermedait, B.Pos Z-Type-10 Nos Discharge Grate -Outer, C.Pos P-Type - 10 Nos Discharge Grate-Intermediate, D.Pos Q-Type- 10 Nos Discharge Grates -Outer, E. Material - Chrome Moly, F. Life Of Liners- 3000 Hrs. Ii. Sag Mill Full Set Of Liners And Accessories, Sag Mill Full Set Of Liners Contains Following, 1.Modified Sag Mill Discharge End Liners 60 Nos, As Per Drg No - Sb - 22-1, 22-2, 22-3, 22-4 & 22-5, A.Pos P-Type-10 Nos Discharge Grate -Intermediate, B. Pos Q-Type -10 Nos Discharge Grate -Outer, C. Pos X -Type -20 Nos Discharge Grate -Inner, D.Pos Y-Type-10 Nos Discharge Grate-Intermediate, E. Pos Z-Type -10 Nos Discharge Grate -Outer F. Material - Chrome Moly, G.Life Of Liners -3000 Hrs, H. Sag Mill Discharge End Bolts Nuts,And Washers -200 Nos,As Per Drg.No-Sb-19, I. Bolt Specification,Bolt-H-40Mm, T-150Mm, L-570 Mm,Property Class For Bolt-9.8,Thread Tolerence-6G,Mfg. Process- Hot Forging & Thread Rolling, J. Hex. Nut & Check Nut,Hex. Nut- M39x3, Check Nut-M39x3,Property Class-8, Thread Tolerence-6H,Check Nut-5Xt, L.Rubber Washer For M39, Iv.Cup Washer For M39, Carbon Steel, 2.Sag Mill Shell Liners-120Nos, As Per Drg.Nos-S.B- 25, 26, 27, 28, Shell Liner Set Contains, I.Lifter Plate Pos-A- 20 Nos,Ii.Lifter Plate Pos-A1-40 Nos, Iii.Shell Liner Pos-B- 20 Nos, Iv. Shell Liner Pos-B1-40 Nos, V. Material- Chrome Moly, Vi. Life Of Liners- 5000 Hrs, 2A. Mill Shell Liner Bolts Nuts And Washers -300 Nos, As Per Drg. No-S.B-24, 1.Bolt Specification,Bolt-H- 55Mm, I-150Mm, L-190 Mm,Property Class For Bolt- 9.8,Thread Tolerence- 6G,Hot Forging And Thread Rolling, 2. Nut & Check Nut,Hex. Nut- M42x3, Check Nut- M42x3,Property Class- 8,Thread Tolerence- 6H,Check Nut- .5Xt, 3. Rubber Washer For M42, 4. Cup Washer For M42, Carbon, Steel- Blackodies, 3.Sag Mill Feed End Liners- 80Nos,As Per Drg.No-S.B-20-1,Liner Set Contains- 1.Feed Head Liner Intermediate- Pos-X-20 Nos, 2. Feed Head Liner -Outer Pos-Y-20Nos, 3. Filler Bars Feed End Pos-Z-40 Nos, 4.Material- Chrome Moly, 5. Life Of Liners - 5000 Hrs, 3A. Sagmill Feed End Liner Bolts Nut,And Washers -200 Nos,As Per Drg.No-Sb-23, 1. Bolt Specification,Bolt- H-55 Mm X T-150 Mm X L-245 Mm,Material- Property Class For Bolt-9.8,Thread Tolerence- 6G,Mfg Process-Hot Forging & Thread Rolling, 2.Nut Specification, Hex. Nut M42x3, Check Nut M42x3,Property Class-8, Thread Tolerence-6H,Checknut-.5Xt, 3. Rubber Washer For M42, 4.Cup Washer For M42 - Sag Mill Full Set Of Liners And Accessories,Modified Sag Mill Discharge End Liners
