Public Works Department-PWD has published Tender For Repair And Maintenance Of Electrical Panel Board Including Fitting Fixing Of Electrical Appliances (Spare Parts) For Dtw Schemes Of Ganganagar Rd Block Area Under Dws Sub-Division, Ambassa (Gr-I). Submission Date for this Tender is 25-09-2023. Spare Part Tenders in dhalai Tripura. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Providing and fitting fixing steel sheet enclosed switch fuse unit(suitable for DIN fuses), triple pole with Neutral Link (TPN),415/500 Volt, L & T / Havells / BCH make etc. completeas per specification and direction of the Engineer-in-charge. |
2 | ii. 63 Amps |
3 | iii. 100 Amps |
4 | Providing and fitting fixing of Fully Automatic Star Delta type Motor starter ( 3 ph. 50 Hz, 415V, in Steel Sheet Enclosures with Contractors and Timer etc. complete suitable for submersible Pump L & T, BCH, ABB make as per specification and direction of the Engineer-in-charge. |
5 | i. 25 HP/18.5 kw Relay range within 13-21 + 10% |
6 | ii. 35 HP/26 kw Relay range within 20-32 + 10% |
7 | Providing and fitting fixing of Direct on line (DOL) motor starter L&T/BCH make ( 3 phase, 50 Hz, 10 HP/7.5 kw relay range within 13-21 + 10%) in steel sheet enclosure complete as per direction of the engineer in charge. |
8 | Providing and fitting fixing of 6 feet x 4 feet x 1 inch (thickness) Gamair wood / plywood pannel board for fitting fixing of electrical items, in/c 2 nos MS angle post ( size 2 inch x 2 inchx 9 feet ), nuts & bolts etc. for irrection of the same by1:1.5:3 cement concrete casting ( 1 feet x 1 feet x 2 feet) below the ground level and paintingtwo ormore coats & plastic paint as per specification and direction of the Engineer-in-charge. |
9 | Providing and fitting fixing with PVC insulated single core multistrand Copper cable conforming to IS : 694 for inter connection with all electrical equipments of the pannel board as per specification and direction of the Engineer-in-charge. |
10 | i. 10.0 sqmm |
11 | ii. 16.0 sqmm |
12 | Providing and fitting fixing of moving iron type, Range 0-500 V, 96 mm x 96 mm size AC Volt meter ( L & T / AE make) with selector switch as a electrical instrument of the pannel board as per specification and direction of the Engineer-in-charge. |
13 | Providing and fitting fixing of moving iron type, Range 0-100/0-200 amps, 96 mm x 96 mm size AC Amps meter direct reading type ( L & T / AE make) with selector switch and CT coil as a electrical instrument of the pannel board as per specification and direction of the Engineer-in-charge. |
14 | Providing and fitting fixing of Moulded Case Circuit Breaker (MCCB) of different Thermal release range , 415 + V, 50Hz (L & T, BCH, ABB make) as per specification and direction of the Engineer-in-charge. |
15 | i. 63-80 Amps |
16 | ii. 80-100 Amps |
17 | iii. 50-63 Amps |
18 | Providing and fitting fixing3 phase indicating lamp fiited with panel board with three different colour lamps with batten holder completeas per specification and direction of the Engineer-in-charge. |
19 | Providing and fitting fixing heavy duty box type (Resin filled) power factor correction capacitorL & T make etc. completeas per specification and direction of the Engineer-in-charge. |
20 | i. 5-15 kVAr 440 V |
21 | Supplying and fixing of fuse unit kitkat in porcelain base in/c necessary connection etc. as per required (HPL) make. |
22 | i) 63 Amps cutout |
23 | ii) 100 Amps cutout |
24 | Supplying & fixing of aluminium thimble in/c necessary connection etc as required |
25 | Providing and fitting fixing Single phasing preventor +selectable under voltage +selectable over voltage on delay 5 sec & off delay 15 sec phase asymmetry 10% L & T /BCH/HAVELS/Siemens etc. make complete as per specification and direction of the Engineer-in-charge. |
26 | Providing and fitting fixing of Bimetal overload relay type series L&T make) as per direction of the Engineer-in-charge. |
27 | i. 13-21 AMP |
28 | ii.20-32 AMP |
29 | iii. 28-42 AMP |
30 | Providing and fitting fixing of slandered operation coil for 415V,50Hz,L&T make as per direction of the Engineer-in-Charge. |
31 | i. ML 1.5 |
32 | ii. ML 2 |
33 | Repairing of existing L&T make FASD Starter by providing & fitting fixing of necessary spare contact kit(in/c spare coil),replacement of damaged connection wire in the starter,testing & commissioning etc. as per specification & direction of the Engineer-in-Charg |
34 | i. ML 1.5 |
35 | ii. ML 2 |
36 | Providing and fitting fixing of Thermal Timer Type GT 200,415V,50Hz for 5-18 sec,L&T make as per direction of the Engineer-in-Charge. |
37 | Providing and fitting fixing of Thermal Timer Type ET 100,415V,50Hz for 9-30sec,L&T make as per direction of the Engineer-in-Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail