Periodical Renewal Of Pmgsy Hand Over Road From Meghlipara To Purba Champamura (L0-53) (L = 1.802 Km) Under Sjtny Under Pwd(R&B) Sub-Division Khayerpur During The Year 2023-24/ Sh:- Wbm-Iii, Premix Carpeting, Sand Seal Coating, Road Side Pacca Drain And O
Tender Value
65.98 Lakhs
Estimated cost
Bid Submission
22 Sep 2023
0 days left
EMD
1.31 Lakhs
Bank guarantee accepted
Document Fee
4000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
jirania → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Periodical Renewal Of Pmgsy Hand Over Road From Meghlipara To Purba Champamura ( L0-53 ) ( L = 1.802 Km ) Under Sjtny Under Pwd ( R&B ) Sub-Division Khayerpur During The Year 2023-24 / Sh:- Wbm-Iii, Premix Carpeting, Sand Seal Coating, Road Side Pacca Drain And Other Allied Works Etc.
BOQ
| Sl. No. | Item Description |
| 1 | Maintanace of Earthen shuoulder ( Stripping of excess soil).Stripping excess soil from shoulders surface tyo achieve the approved level and compacting with plate compactor at OMC as per drawing and MoRD technical specification clause 1903. |
| 2 | WBM Grading III Providing, laying, spreading and compacting jhama brick aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing rolling with three wheel roller 80-100 KN in stages to proper grade and camber, applying and brooming binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density Grading- 3 as per MoRD Technical Specification Clause 405.(A) By Manual Means. |
| 3 | Tack Coat.Tack coat using hot straightr run bitumen of grade VG-30 on WBM. Providing and applying tack coat using hot straight run bitumen of grade VG-30 , including heating the bitumen cleaning and preparing the existing road surface as per specification : on WBM @ 0.75 kg /Sqm. |
| 4 | Tack coat using hot straight run bitumen of grade VG-30 on bituminous surface.Providing and applying tack coat using hot straight run bitumen of grade VG-30, including heating the bitumen, spraying the bitumen, cleaning and preparing the existing road surface as per specifications : On bituminous surface @ 0.50 Kg/ Sqm. |
| 5 | 20 mm thick Open-Graded Premix Carpet using Bituminous (viscocity grade/ modified bitumen) BinderProviding, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscocity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base , including mixing in a suitable plant, laying and rolling with a three wheel 80 - 100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C or Type D as per MoRD Technical Specification Clause 508. Case - I : By Manual Means: (II)Bitumen of VG-30 |
| 6 | Seal CoatProviding and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A or Type B or Type C or Type D as per MoRD Technical Specification Clause 510.By Manual Means Case - IV : Type D (premix with fine sand) Bitumen (60/70 Grade) VG-30 |
| 7 | Road side Pucca drains.Construction of road side pucca drain with M10 (1:3:6 with jhama brick aggregate)to specified lines, grades, levels and dimensions as per approved design and MoRD Technical Specification Clause 307, 1606. Excavated material to be used in embankment at site. (including centering, shuttering, etc. but excluding reinforcement).(C) Trapezoidal drain (top clear width 600 mm,bottom clear width 300 mm and clear depth of 600 mm). (ii) In Ordinary Soil. |
| 8 | Excavation for structures. A) Without dewatering.Earthwork in excavation for structures as per drawing and MoRD technical specifications Clause 305.1 including setting out, construction of shoring & bracing, removal of stumps & other deleterious material and disposal upto a lead of 50 m, dressing of sides & bottom and backfilling in trenches with excavated suitable material.I.Ordinary soil. (i) Upto 3 m depth |
| 9 | Filling in foundation trenches as per drawing & MoRD technical specification Clause 305.3.9, 1200.I ) Sand filling |
| 10 | Providing concrete for plain concrete (using jhama brick aggregate ) in open foundations complete including formwork as per drawings & MoRD technical specifications Clauses 802, 803, 900, 1202 and 1203. (including centring, shuttering, staging etc. but excluding reinforcement ) I) P.C.C grade M 15.( using jhama brick aggregate).i)Nominal mix (1:3:6) |
| 11 | Brick masonry work in cement mortar in sub-structure complete excepting pointing & plastering as per drawing & MoRD technical specifications Clauses 602, 603, 604, 1202 & 1204.I. Brick masonry in 1:4 cement mortar |
| 12 | Plastering with cement mortar (1:4) 12 mm thick on brickwork / C.C. work including a finishing coat of neat cement punning with 2.75 Kg of cement per sqm in substructure as per MoRD technical specification Clauses 613.4 & 1204. |
AI Tender Summary
Tender Timeline
Sep 02, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedSep 22, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 22, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender