Municipal Corporation Aurangabad has published Tender For Construction Of Compound Wall Work Below Bridge Area At Maruti Automotive Aurangabad.. Submission Date for this Tender is 07-09-2023. Wall Construction Tenders in Aurangabad Maharashtra. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting etc. complete. (Liftupto 1.5 m.) By Mechanical Means ITEM NO.21.02 |
2 | Providing and laying Casting situ/ Ready Mix cement concrete in M15 of trap/ granite/ quartzite/ gneiss metal for bed blocks, foundation blocks and such other items including bailing outwater, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honey combed surface and curing etc.complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honey combed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enable dreversible Drum Type mixer/ concrete Batch mixplant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) ITEM NO.24.08 |
3 | Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls / in plinth of external walls including bailing out water manually , striking joints on un exposed faces and watering etc.complete. |
4 | Providing and laying Cast in situ/ Ready Mix cement concrete M-15 of trap/ granite/ quartzite/ gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honey combed surface and curing etc. complete. The Cement Mortar 1:3 plasteris considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.(Wooden centering will not be allowed.) With fine aggregate (Crushedsand VSI Grade) item no.24..16 |
5 | Providing second class Burnt Brick masonry with conventional /I.S .type bricks in cement mortar 1:6 insuperstructure including striking joints, raking out joints, watering and scaffoldingetc. Complete ITEM NO.27.05 |
6 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions Including basecoatof15mmthickincementmortar1:4usingwaterproofingcompoundat1Kilogrampercementbagcuringthesamefornotlessthan2daysandkeepingthesurfaceofthebasecoatroughtoreceivethesandfacedtreatment6to8mmthickincementmortar1:4finishingthesurfacebytakingoutgrainsandcuringforfourteendaysscaffolding etc.complete.ITEM NO.32.11 |
7 | Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etc complete.item no.35.26 |
8 | Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted/welded connections without connecting plates, braces etc. and including one coat ofanticorrosive paint and over it two coats of oil painting of approved quality and shadeetc. complete.ITEM NO.23.01 |
9 | Providing and fixing collapsible steel gate in one/ two leaves with hot rolled vertical channels of 18x9x3 mm minimum size, crossings of M.S. flats of size18x5mm Tor Esection for runner ofminimum 40x6 mm size for flange, M.S. flat for top runner of minimum size 40x12 mm with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6mm max. spacing of vertical channels be 100 mm enclosed gate position and clear space of 150mm between two sets of crossings with holdfasts, stoppers, spaces ,handles ,locking arrangement and one coat of redlead primer and oil painting etc. complete.(I.S. 105211983).Item No.39.26 |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail