Indian Institute Of Technology-IITB has published Tender For Providing And Fixing Of Gi Sheet In Gutter Of Nano Carbon Lab, Providing And Fixing Of Water Connections In Old Sric Office ,Providing And Fixing Of Aluminium Partitions In Opto-Electronic Device Process Lab And Construction Of Masonry Wall Bet. Submission Date for this Tender is 08-09-2023. Aluminium Furniture Tenders in mandi Himachal Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from n58.atural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) in all lead and lift as per entire satisfaction and direction of Engineer-in-charge. |
| 2 | Providing and fixing bolts including nuts and washers complete in all lead and lift as per entire satisfaction and direction of Engineer-in-charge. |
| 3 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 75 mm diameter in all lead and lift as per entire satisfaction and direction of Engineer-in-charge. |
| 4 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 110 mm diameter in all lead and lift as per entire satisfaction and direction of Engineer-in-charge. |
| 5 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansionCoupler 110 mm in all lead and lift as per entire satisfaction and direction of Engineer-in-charge. |
| 6 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, Single tee without door 110x110x110 mm in all lead and lift as per entire satisfaction and direction of Engineer-in-charge. |
| 7 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansionBend 87.5° 110 mm bend in all lead and lift as per entire satisfaction and direction of Engineer-in-charge. |
| 8 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete 110 mm in all lead and lift as per entire satisfaction and direction of Engineer-in-charge. |
| 9 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material of: G.S. Sheet in all lead and lift as per entire satisfaction and direction of Engineer-in-charge. |
| 10 | Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. For vertical surface two coats @ 0.70 kg per sqm in all lead and lift as per entire satisfaction and direction of Engineer-in-charge. |
| 11 | Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. For horizontal surface one coat @1.10 kg per sqm in all lead and lift as per entire satisfaction and direction of Engineer-in-charge. |
| 12 | Providing and fixing plain galvanised iron profile sheets (size, shape approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required in all lead and lift as per entire satisfaction and direction of Engineer-in-charge. |
| 13 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansionMouthpiece 110 mm diameter in all lead and lift as per entire satisfaction and direction of Engineer-in-charge. |
| 14 | Fixing Roofing including ridges, hips, valleys and gutters etc.in all lead and lift as per entire satisfaction and direction of Engineer-in-charge. |
| 15 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) in all lead and lift as per entire satisfaction and direction of Engineer-in-charge. |
| 16 | Centering and shuttering including strutting, propping etc. and removal of form for Shelves (Cast in situ) in all lead and lift as per entire satisfaction and direction of Engineer-in-charge. |
| 17 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more in all lead and lift as per entire satisfaction and direction of Engineer-in-charge. |
| 18 | Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) With F.P.S.(non modular) bricks in all lead and lift as per entire satisfaction and direction of Engineer-in-charge. |
| 19 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottlegreen, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete in all lead and lift as per entire satisfaction and direction of Engineer-in-charge. |
| 20 | Providing and fixing 18 mm thick gang saw cut, mirror polished,premoulded and prepolished, machine cut for kitchen platforms, vanitycounters, window sills, facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cementmortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement,mixed with matching pigment, epoxy touch ups, including rubbing, curing,moulding and polishing of edges to give high gloss finish etc. complete at all levels Granite stone slab of colour black, Cherry/Ruby red, Area of slab over 0.50 sqm in all lead and lift as per entire satisfaction and direction of Engineer-in-charge. |
| 21 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Char Granite work in all lead and lift as per entire satisfaction and direction of Engineer-in-charge. |
| 22 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, Coupler 75mm in all lead and lift as per entire satisfaction and direction of Engineer-in-charge. |
| 23 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, Single tee without door 75x75x75 mm in all lead and lift as per entire satisfaction and direction of Engineer-in-charge. |
| 24 | Providing and fixing on wall face unplasticised-- PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion Bend 87.5, 75mm in all lead and lift as per entire satisfaction and direction of Engineer-in-charge. |
| 25 | 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) in all lead and lift as per entire satisfaction and direction of Engineer-in-charge. |
| 26 | Demolishing brick work/Block work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar in all lead and lift as per entire satisfaction and direction of Engineer-in-charge. |
| 27 | Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 600x450x200 mm in all lead and lift as per entire satisfaction and direction of Engineer-in-charge. |
| 28 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 40 mm dia in all lead and lift as per entire satisfaction and direction of Engineer-in-charge. |
| 29 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 20 mm nominal dia Pipes in all lead and lift as per entire satisfaction and direction of Engineer-in-charge. |
| 30 | Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore in all lead and lift as per entire satisfaction and direction of Engineer-in-charge. |
| 31 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore in all lead and lift as per entire satisfaction and direction of Engineer-in-charge. |
| 32 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore in all lead and lift as per entire satisfaction and direction of Engineer-in-charge. |
| 33 | Providing and fixing greating 110mm dia for aluminium sliding window shutter in all lead and lift as per entire satisfaction and direction of Engineer-in-charge. |
| 34 | Providing and fixing G.I. Tank Nipple including cutting and threading the pipe and making long screws etc. complete (New work): in all lead and lift as per entire satisfaction and direction of Engineer-in-charge. |
| 35 | Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 125x75x4 mm in all lead and lift as per entire satisfaction and direction of Engineer-in-charge. |
| 36 | Providing and fixing aluminium tower bolts, ISI marked, powder coated transparent or dyed to required colour or shade, with necessary screws etc. complete : 200x10 mm in all lead and lift as per entire satisfaction and direction of Engineer-in-charge. |
| 37 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) in all lead and lift as per entire satisfaction and direction of Engineer-in-charge. |
| 38 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) in all lead and lift as per entire satisfaction and direction of Engineer-in-charge. |
| 39 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side in all lead and lift as per entire satisfaction and direction of Engineer-in-charge. |
| 40 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasketetc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness in all lead and lift as per entire satisfaction and direction of Engineer-in-charge. |
| 41 | Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings in all lead and lift as per entire satisfaction and direction of Engineer-in-charge. |
| 42 | Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete in all lead and lift as per entire satisfaction and direction of Engineer-in-charge. |
| 43 | Providing and fixing dash fastener for frame work of required lengths in all lead and lift as per entire satisfaction and direction of Engineer-in-charge. |
| 44 | Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete in all lead and lift as per entire satisfaction and direction of Engineer-in-charge. |
| 45 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) in all lead and lift as per entire satisfaction and direction of Engineer-in-charge. |
| 46 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete in all lead and lift as per entire satisfaction and direction of Engineer-in-charge. |
| 47 | Centering and shuttering including strutting, propping etc. and removal of form Lintels, beams, plinth beams, girders, bressumers and Cantilevers in all lead and lift as per entire satisfaction and direction of Engineer-in-charge. |
| 48 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) in all lead and lift as per entire satisfaction and direction of Engineer-in-charge. |
| 49 | Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry in all lead and lift as per entire satisfaction and direction of Engineer-in-charge. |
| 50 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) in all lead and lift as per entire satisfaction and direction of Engineer-in-charge. |
| 51 | 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) in all lead and lift as per entire satisfaction and direction of Engineer-in-charge. |
| 52 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer"s specification. Two or more coats on new work in all lead and lift as per entire satisfaction and direction of Engineer-in-charge. |
| 53 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete in all lead and lift as per entire satisfaction and direction of Engineer-in-charge. |
| 54 | Dismantling tile/kota work in floors and roofs laid in cement mortar including Stacking material in all lead. For thickness of tiles/kota 10 mm to 25 mm in all lead and lift as per entire satisfaction and direction of Engineer-in-charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
