}

Tender For Erm Of Fiac Kalampur (Boundary Wall, Gate, Approach Road And Bore Well For The Year-2019-20., Kalahandi-Odisha

Department Of Agriculture And Food has published Tender For Erm Of Fiac Kalampur (Boundary Wall, Gate, Approach Road And Bore Well For The Year-2019-20.. Submission Date for this Tender is 11-09-2023. Road Work Tenders in Kalahandi Odisha. Bidders can get complete Tender details and download the document.




Tender Notice

39428175
Tender For Erm Of Fiac Kalampur (Boundary Wall, Gate, Approach Road And Bore Well For The Year-2019-20.
Open Tender
Indian
Odisha
Kalahandi
11-09-2023

Tender Details

Tender For Erm Of Fiac Kalampur ( Boundary Wall, Gate, Approach Road And Bore Well For The Year-2019-20.

Key Value

Document Fees
INR 4000 /-
EMD
INR 8333.0 /-
Tender Value
INR 8.33 Lakhs /-

BOQ Items

Name of Work: ERM of FIAC Kalampur (Boundary Wall, Gate, Approach Road and Bore Well for the Year-2019-20.
Sl. No. Item Description
1Fly Ash brick masonry in cement mortar (1:6) in Superstructure work using fly ash bricks of 23cm x 11cm x 8cm size having a crushing strength of not less than 75 kg/cm2 with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing including cost, conveyance, royalties and of all materials with all labour and T&P required for the work complete in all respect in all floors as per the direction of engineer-in-charge, excluding labour cess and GST.
21st floor
32nd floor
416 mm thick cement plaster (1:6) finished smooth to inside rough surface ofbrick walls after raking out the joints including watering and curing with cost with cost, conveyance, royalties and of all materials with all labour, T&P required for the work etc. complete as per the direction of engineer-in-charge, excluding labour cess and GST..
51st floor
62nd floor
725 mm thick grading concrete(1:2:2) over RCC slabwith grading properly for drainout of rain watersmoothly finished smooth including closed deep chipping and slurry treatment including watering and curing with cost, conveyance, royalties andof all materials with all labour and T&P required for the work etc. Complete in all respect as per the direction of engineer-in-charge, excluding labour cess and GST.
82nd floor
9Finishing inside walls with plastic Emulsion paint of approved shade on new work two coats to give an even shade with one coat water based primer with cost, conveyance, royalties and of all materials with all labour and T&P required for the work etc. complete in all respect as per the direction of engineer-in-charge, excluding labour cess and GST.
10Ground Floor
111st floor
122nd floor
13Finishing wall surface of walls with Acrylic wall putty (Water based ) of approved make with one coat water based primer and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete in 1st floor.
14Finishing outside & inside walls with Weather Coat paint of approved shade on new work two coats to give an even shade with one coat water based primer with cost, conveyance, royalties and of all materials with all labour and T&P required for the work etc. complete in all respect as per the direction of engineer-in-charge, excluding labour cess and GST.
15Ground Floor
161st floor
172nd floor
18Providing and Fixing of MS Angle Fabricated Trusses, Purline wind tie andMS Door Shutter, MS Windows as per the Drawing & design approved by deptt. including transportation charges, Two coat of Synthetic enamel paint of approved shedover coat of anti-corrosive red-oxide zinc chrome primer andof all materials with labour, cess and T&P etc. required for the workcomplete as per the direction of engineer-in-charge, excluding labour cess and GST.
19Supplying, fitting, fixing up window (sliding type) made up of aluminium section 151-154, 151-155 as window frame section; No 151-155, 151-153 and 151-167 as shutter frame with 5mm thick black glass as panel fitted with rubber bending including locking arrangement and all fittings including cost of materials, taxes labour, T&P complete as per the direction of engineer-in-charge, excluding labour cess and GST.
20Supplying, fitting, fixing up window (Fixed type) made up of aluminium section 151-154, 151-155 as window framewith 5mm thick black glass as panel fitted with rubber bending including locking arrangement and all fittings including cost of materials, taxes labour, T&P completeas per the direction of engineer-in-charge, excluding labour cess and GST.
21Providing fitting and fixing of false ceilling with Aluminium anodised T Section No. 3215 with 2"-0" center to center, L section No. 1705 upto 15 micron on 4 walls to be fixed by means of steel screw and P.V.C plug and the Aluminium grid 2"-0"x2"-0" suspended from ceiling etc complete with 12.5 mm thick Gypsum Board including all cost of labour, T&P, hire charges of drilling machine, labour charges etcas per the direction of engineer-in-chargeexcluding labour cess and GST.
22providing and fixing of glass in sliding type windows as replacement for broken glass of 5 mm thick including labour and materials tc complete, in all respect as per the direction of engineer-in-charge, excluding labour cess and GST.
23Supplying all materials, labour, T&P for fitting and fixing of cemic Sink including all fittings and testing etc. complete Vitreous china flat back sink basin of size 24"x16"x8"as per the direction of engineer-in-charge, excluding labour cess and GST.(Parryware)
24Extra fitting for water supply Connection
25Electrification
26Recessed wiring to light point swith 1.5 mm2 in 20mm dia rigid PVC conduit with 1559mm single core multi strand copper wire and earth continut in copper with on M.S. board with 3mm thick B.K. covered and 5A flash type switch with ISI marked as the direction of engineer in charge excluding labour cess and GST
27a) Group A
28Recessed wiring to submain wiring in PVC conduit along with earth wire with the following sizes of PVC insulated single core multistrand copper conductor ISI marked confirming to IS-694/1990 in 20mm non metalic PVC conduit excluding labour cess and GST
29(2 x 1.5 sq.mm + 1x 1.5 sq.mm)
30(2 x 1.5 sq.mm(Single standwire for audio system)
31(2 x 2.5 sq.mm + 1x 1.5 sq.mm)
32(2 x 4 sq.mm + 1 x 1.5 sq.mm)
33Supply and wiring and testing led TL40 watt complete with all accessories fittingsand connection wire (Bajaj, Usha, Khatian,Havels, orient) complete as per the direction of engineer-in-charge excluding GST.
34Supply and fixing of 15w LED/CFL Bulb fitting light(Havells/Bajaj/CG) forall complete
35Installation,testing and commissioning 18w LED of 6500Kpanel squre/roundLight etc directly in ceiling , including connection with 1.5 sqmm FR PVCinsulated copper conductor and earthing as required as per direction of engineer in charge.( make of wireFinolex/ L & T /Anchor/Havels/V Guard.
36Installation,testing and commissioning7w LED Down Lighterdirectly in ceiling , including connection with 1.5 sqmm FR PVCinsulated copper conductor and earthing as required as per direction of engineer in charge.( make of wireFinolex/ L & T /Anchor/Havels/V Guard.
37Suppling fittingfixing of Extension bar for theexisting ceiling fan with extension of wires to the fan all complete as per the direction of Engineer in charge.
38Supplying and fixing of in recess with suitable size of phenoliclaminated sheet cover in front including providing and fixing 3pin 15 / 16 amps socket outlet and 15 / 16 amps piano type switch, connection, painting etc as required.(For light plugs to be used in non residential buildings excluding labour cess and GST
39Supply and Installation, testing and commissioning of exhaust fan up to 225 mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damage complete, connection, etc. as required.(Bajaj, Usha, Khatian)
40Supply and Installation, testing and commissioning of 1.5 T Inverter type Airconditioner rating 5 star with4 KVA power stabiliser (Luminous/V-Gurd, Voltage range 130-300 V)and making good of the wall fixing the outer unit to a suitable place with comple frame fittings all complete, connection, etc. as required.(Godrej, LG, Llyod, Voltas)
41Supply, installation and testing of digital projector ofEpson make and model- VGA EB-E01 brightness 3300 lm model supporting HDMI port with mounting the unit on roof with hanger stand including all fittings including screen of 8x6ftwith supporting standwith cable for connecting both electcity and data cable of20 m each with all materials and labouras per the direction of engineer in charge.
42Sound system with 4 nos speaker(15wx4), 1 amplifier(75w) and 2 nos cordless mouth piece
43Led Strip Light(5m per set)
44Supply and fitting of 5/6 A 250 flash type socket and switch above specification of existing switch boards.as the direction of engineer in charge excluding labour cess and GST
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail