Military Engineer Services-MES has published Tender For Additional/Alteration In Bldg No T-117, T-118 And Provn Of Toilet And Bathroom Near A Vehicle Garages At Mil Stn Nabha Under Ge (South) Patiala. Submission Date for this Tender is 26-09-2023. Toilet Bathroom Tenders in nabha Punjab. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 19-Sep-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 26-09-2023 |
| Sl. No. | Item Description |
| 1 | Excavation in trenches not exc 1.5 mtr wide and not exceeding 1.5mtr depth for foundation in soft/loose soil & getting out.complete all as specified and as directed by the Engineer-in-Charge. |
| 2 | M&L PCC (1:4:8) type D2 using 40mm graded aggegate as in foundation.complete all as specified and as directed by the Engineer-in-Charge. |
| 3 | Demolition of brick work built incement mortar. |
| 4 | M&L brick work in CM (1:6) with sub class "B" bricks straight or curved on plan exc 6 mtr mean radius complete all as specified and as directed by the Engineer-in-Charge. |
| 5 | M&L for brick work in cement mortar (1:4) using sub class "B" bricks staight or curved on planbut in half thick brick walls. complete all as specified and as directed by the Engineer-in-Charge. |
| 6 | Returning filling in incl spreading, levelling, watering & well ramming in layers not exc 25cm thick for soft/loose soil complete all as specified and as directed by the Engineer-in-Charge. |
| 7 | Removing excavated material 250 m but n.exc 50m and depositing where directed at a lavel .exc 1.50 mtr above the starting point.complete all as specified and as directed by the Engineer-in-Charge. |
| 8 | M&L 40mm thick 1.2.4 type B-0 Damp proof course to horizontal or vertical surfaces including necessary formwork complete all as specified and as directed by the Engineer-in-Charge. |
| 9 | Dismantling of unservicable wrought iron or mild steel of any description complete all as specified and as directed by the Engineer-in-Charge. |
| 10 | M&L for Rolled sections as in main and cross beams, hip and jack rafters purlins, where connected to common rafters and running rails and guides for structural purpose, fixed with angle cleats or other connecting plates to Fe-290 (Gde E-165) complete all as specified and as directed by the Engineer-in-Charge. |
| 11 | S&F mild steel plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases, splices, angle brackets, cleats and other connections complete all as specified and as directed by the Engineer-in-Charge. |
| 12 | Dismantling of asbestos cement sheets [corrugated, semi-corrugated, etc] in roof coverings complete all as specified and as directed by the Engineer-in-Charge. |
| 13 | S & F for pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed to self tapping screws as specified complete all as specified and as directed by the Engineer-in-Charge. |
| 14 | S&F pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in ridges, roof covering/clading to wall, fixed with self tapping screws complete all as specified and as directed by the Engineer-in-Charge. |
| 15 | M&L for preparing surfaces of any description over 10 cm girth or width,not otherwise described and applying two coats of synthetic enamel paint over a coat of Red oxide on new surfaces of steel or iron, complete all as specified and as directed by the Engineer-in-Charge. |
| 16 | Taking down cement plaster on walls built in cement mortaretc including racking out joints, hacking for key.Scrubbing down with water etc.complete all as specified and as directed by the Engineer-in-Charge. |
| 17 | M & L for 15mm thick ( in two layers of 10mm and 5mm thickness) cement pastering in cement mortar 1:4 and mixig the water proofing compound as per manufactures instructions on brick or concrete surface of wall finishedcomplete all as specified and as directed by the Engineer-in-Charge. Note : Water proofing compound shall be measured and paid saparately under item . |
| 18 | Supply only integral water proofing compound ISI marked. Make :Pidilite/Sika |
| 19 | Complete removal of existing treatment of any type/description such as distempering work ,internal emulsion etc from internal/external surfaces of walls & ceiling with mechanical means/grinder including removal of material from site complete all as specified and as directed by the Engineer-in-Charge. |
| 20 | M&L for applying acrylic thick wall care putty on internal/external surfaces of walls/ceilings/soffits(thickness vary from1.5to2.5mm as required for desired smoothness and levelling of surfaces in two or more layers)by us ingready made wall careputty including sand papering after filling the putty to make surface smooth and ready for receiving painting etc complete all as specified and as directed by the Engineer-in-Charge. |
| 21 | M&L Applying 02 coats of interior emulsion paint (white shade) @ 10 sq.m/litre/2 coats to ceiling surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and as directed by the Engineer-in-Charge. |
| 22 | M&L 10mm thick cement plastering in cement mortar 1:6 on fair faces of brick work or concrete surfaces complete all as specified and as directed by the Engineer-in-Charge. |
| 23 | M&L 100 mm th PCC 1:4:8 type D2 ( Using 40 mm graded stone agg.)as in sub base of floors.complete all as specified and as directed by the Engineer-in-Charge. |
| 24 | M&L Factory made steel windows or ventilators, fixed type with glazing bars complete all as specified and as directed by the Engineer-in-Charge. |
| 25 | M&L Hard core of broken bricks of gauge nexc. 63 mm spread and levelled in layers nexc.15cm thick, watered and rammed to a true surface all as directed and specified complete all as specified and as directed by the Engineer-in-Charge. |
| 26 | M&L 50 mm thick plain cement concrete 1:3:6 mix, type C-2using 40mm graded stone aggregate as in plinth portection, finishing the surfaces even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge. |
| 27 | M&L Preparation of new plastering surfaces of walls and applying two coats of cement base paint over one coat of cement primercomplete all as specified and as directed by the Engineer-in-Charge. |
| 28 | M & L for two coat of distemper with oil emulsion on wall including preparation of new plastered or unplastered surface including washingrubbing down and stoping of distempered and painted surface complete all as specified and as directed by the Engineer-in-Charge. |
| 29 | Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holesand making good reqd shape for hold fast block for new frame complete all as specified and as directed by the Engineer-in-Charge.. |
| 30 | S&F Fe290 (Gde E-165) Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening Note - Removing of old gate fixing new steel gate of hold fast ,complete all as specified and as directed by the Engineer-in-Charge. |
| 31 | S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification complete all as specified and as directed by the Engineer-in-Charge. |
| 32 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per manufacturer’s instructions.complete all as specified and as directed by the Engineer-in-Charge. |
| 33 | S&F 100mm size PVC butt hinges complete all as specified and directed |
| 34 | S&F 150mm size PVC handles complete all as specified and directed. |
| 35 | S&F 200mm long PVC tower bolt complete all as specified and directed. |
| 36 | S&F Steel water tubing medium grade 15mm bore galvanised with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed by the Engineer-in-Charge. |
| 37 | S&F Steel water tubing medium grade 20mm bore galvanised with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed by the Engineer-in-Charge. |
| 38 | S&F 450mm long PVC connection of approved quality with brass check nuts at both ends for 15mm bore pipe complete all as specified and as directed by the Engineer-in-Charge. |
| 39 | S&F Rotational moulded polythene water storage tanks, double layered (Cylindrical vertical with closed top) of capacity 1000 lit, hoisted and fixed in position complete all as specified and as directed by the Engineer-in-Charge. |
| 40 | S&F Ball brass valve, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed to dia of pipe 20mm complete all as specified and as directed by the Engineer-in-Charge. |
| 41 | S&F Stop valve castgate valve copper alloy screwed down high pressure with crutch or iron wheelhandle screwed both ends for iron pipe of bore 20mm fixedcomplete all as specified and as directed by the Engineer-in-Charge. |
| 42 | S&F Angle stop cock fancy type, brass chromium plated with CP wall cap 15 mm borecomplete all as specified and as directed by the Engineer-in-Charge. |
| 43 | Dismantling of floor or wall tiling including cement mortar bedding but not backing and removing the rubbish off the premises complete all as specified and as directed by the Engineer-in-Charge. |
| 44 | M&L forCeramicfloor tiles of minimum size 600X600 mm 8 to 10mm thick in flooring etc set and jointed in neat cement lurry and pointed in white cement to match over and including 20mm thick screed bed in CM (1:4) laid overcomplete all as specified and as directed by the Engineer-in-Charge. |
| 45 | M&L for anti skid coloured pressed ceramic floor tiles of minimum size 300X300 mm 8 to 10mm thick in flooring etc set and jointed in neat cement lurry and pointed in white cement to match over and including 20mm thick screed bed in CM (1:4) laid overin complete all as specified and as directed by the Engineer-in-Charge.. |
| 46 | M&L fo 25mm thick PCC (1:2:4) type B-0 using 12.50 mm graded crushed stone aggregates in complete all as specified and directed.as in floor base complete all as specified and as directed by the Engineer-in-Charge. |
| 47 | M&L Coloured glazed ceramic tiles (300 x 600 mm) x 7mm or (450X350 mm)X7mm thickas in vertical surfaces such as skirtings, dados etc jointed in neat cement slurry and pointed in white or coloured cement to match,laid over and including 10mm thick back coat in CM (1:4), in complete all as specified and as directed by the Engineer-in-Charge. |
| 48 | M&L for 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floors/walls as soil pipe complete all as specified and as directed by the Engineer-in-Charge. |
| 49 | M&L for 110mm diaPVC (SWR) bends with access door any radius complete all as specified and as directed by the Engineer-in-Charge. |
| 50 | M&L for 110mm dia PVC (SWR) junction double, (double T), equal or unequal radius complete all as specified and as directed by the Engineer-in-Charge. |
| 51 | M&L for 110mm diaPVC (SWR) vent cowl radius all as specified. |
| 52 | M&L for 110mm dia PVC (SWR) "P’ trap radius all as specified. |
| 53 | M&L forPVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement all as specified. |
| 54 | S&F Flushing cistern low level, PVC 10 lit capacity syphonic action type, valve less with inlet ball valve complete all as specified and as directed by the Engineer-in-Charge. |
| 55 | S&F brass Chromium plated Bib taps fancy type 15 mm dia boretype with cruth handle, screwed down, screwed for iron pipe all as specified and directed by Engineer-in-Charge. |
| 56 | S&F 15mm dia pillar taps fancy type Chromium plated screwed down high presswure with or without lettered "Hotor Cold" with long screwed shanks and fly nuts ,screwed for iron pipe complete all as specified and directed by Engr-in-Charge. |
| 57 | M&L for broken brick boulders hardcore of guage n.exc 63mm deposited spread and levelled in layers under plinth protection.complete all as specified and as directed by the Engineer-in-Charge. |
| 58 | S&F Viterous china ware wash down water closet Orrisa patternsize 580x440mm white with integral foot restsincluding connection to traps and to flushing pipe, anti syphonage pipe complete fixed in repair.complete all as specified and as directed by the Engineer-in-Charge. |
| 59 | S&F Reinforced concrete pipes, class NP2 laid and jointed complete with collars bore in pipes 150mm complete all as specified and as directed by the Engineer-in-Charge. |
| 60 | M & L for cement concrete bed (1:3:6) type C-2 using 40mm graded stone aggregate to drain pipe of 150 mm bore including packing under hunching against the site of pipe after they are laid and tested.complete all as specified and as directed by the Engineer-in-Charge. |
| 61 | S&F Vitreous china premium/1st quality Wash basin (under counter), white size 580x430mm incuding all accessories as recommended by manufacturer complete fixed in position in all respect as per manufacturers instructions complete all as specified and as directed by the Engineer-in-Charge. |
| 62 | M&L fixed in repair Vitreous China urinals,half stall urinal complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe Urinal, bowl type or half stall pattern, basin only including connections to flushing pipe and outgoing pipescomplete all as specified and as directed by the Engineer-in-Charge. |
| 63 | M&L Vitreous china urinal partition white of size 310x700 mmUrinal partitions slabs terminating about 40cm above floor line, complete all as specified and as directed by the Engineer-in-Charge. |
| 64 | M&LUrinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms)complete all as specified and as directed by the Engineer-in-Charge. |
| 65 | M&L for reinforcement cement concrete (Normal mix )1:2:4 Type B1 (20mm graded aggregate) as in slab support on wall ,deck slab and in shelves and the like.complete all as specified and as directed by the Engineer-in-Charge. |
| 66 | TMT bars 6 to 8mm dia and over mild steel as in reinforcement, cut to length bent to shape required including cranking and bending with MS wire (anealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by the Engineer-in-Charge. |
| 67 | M&L for RCC 1:2:4 type B-1, using 20mm graded crushed stone aggregate as in sun shades/Chajjas/ Fascias/ Lintelbeams/etc including necessary form work and complete all as specified and as directed by the Engineer-in-Charge. |
| 68 | Use and wste of formwork to edges of concrete flats, floor and roofs n exc 20 cm wide.complete all as specified and as directed by the Engineer-in-Charge. |
| 69 | Use & waste of formwork to sides and soffits of floor and roof beams ,lintels beam ,cantilevers ,shelves including supports ,overhangs and similar work , for rough finished flat surfaces complete all as specified and as directed by the Engineer-in-Charge. |
| 70 | M & L 20mm thick black colure graniteMachine cut as in border (Patti) laid over cement screed 15mm thick in CM 1:4 over and jointed with gray cement slurry mixed with pigmentincluding rubbing and polishing complete all as specified and as directed by the Engineer-in-Charge. |
| 71 | M & L for precast RCC 1:2:4, type B-1 as in man hole cover slabsusing 20mm graded stone aggregate and set in CM 1:4 including necessary form work all as specified and directed. Note : Reinforcement shall be measured and paid separately |
| 72 | S&F 600mm x 450mmmirror of selected quality glass mounted on 6mm thick AC building board with alluminium frame all around hanging to wall with rawal plug and iron slits cup washers complete all as specified and as directed by the Engineer-in-Charge. |
| 73 | S&F Powder coated Pressed steel frames made of MS sheet of 1.25 mm thickness for doors with single rebate including necessary fixing lugs, hinges, lock strike plate, hold fasts ,filling PCC (1:3:6 Co) in chowkhats , PCC 1:2:4 B1 hold fast blocks etc., complete as specified,size 105x 60mmincluding cutting holes and making good reqd to shape for hold fast blocks for new frame complete all as specified. ( Note :- Disturbed portion of existing floor /wall / tile / plaster etc duing fixing of chowkhatsshall be repaired to match with existing finish .Cost of the same will be included in this item )complete all as specified and as directed by the Engineer-in-Charge. |
| 74 | S&F 35mm 2nd class hard wood Glazed and skeleton shutters,2nd class hard wood open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed by the Engineer-in-Charge. |
| 75 | S&FMild steel barrel tower bolt 200mm long stove enamelled black with bright bolt and fixed |
| 76 | S&F Mild steel sliding door bolt of size 250mm , stove enamelled black with bright bolt not less than 16mm dia, with and including a minimum of 6 bolts and nuts,complete all as specified and directed. |
| 77 | S&FMS pressed handles of size 125mm ovaltype stove enamelled black. |
| 78 | S&F Mild steel butt hinges of size 100mm medium weight cold rolled. |
| 79 | S&F 300 mm long MS rat tail pattern spring hinge including roller and roller plate, complete all as specified. |
| 80 | S & F Wire netting of galvanised steel wire 1.40mm dia and size of mesh 25mmfixed with wooden bedstinned tacks of wire staples |
| 81 | M&L preparingof newsurface of wood and wood based material of any description not otherwise described over 10cm width or girth and applying twocoat of synthetic enamel pain and one coat of pink primercomplete all as specified and as directed by the Engineer-in-Charge. |
| 82 | Demolition of cement concrete (un-reinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level), complete all as specified and directed. |
| 83 | M&L Machine pressed precast concrete inter locking paver block any shape and size made of M-35 grade concrete (with grey cement and no pigment) of 60mm thickness with 6mm top layer of anti abrasive material laid over 25mm thick (compacted) fine sieved sand complete all as specified and directed. |
| 84 | M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base of flooring. |
| 85 | M&L Machine cut Kota stone slab flooring 20mm (+2mm) thick laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:4 as base laid and jointed with grey cement slurry mixed with pigment to match the shade ofslab including rubbing and polishing complete all as specified anddirected. |
| 86 | All as per item No 68 here in before on vertical surfaces as in skirting/dado of size as required all as directed and specifiede. |
| 87 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets |
| 88 | S&F Providing and fixing Gypsum Board 12mm thcik in ceiling fixed with screw with 6mm GI wire suspended grid as per manufactures instructionscomplete all as specified and directed by the Engineer-in-Charge. |
| 89 | S&F PVC wall panelling of hollow section size 150x10mm (colour/pattern as approved by AO) complete fixed in position in all respect including supply and fixing of all accessories like fasteners/ screws/ solvent etc all as recommended by manufacturer, complete all as specified and as directed by the Engineer-in-Charge. |
| 90 | Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete with fittings and fixtures such as switches, ceilingroses, pendants, regulators, socket, lamp holders brackets, bulkhead fittings etc removing material for taking credit ( credit shall be recovered as per credit Sch attached) and also making good disturbed surfaces of wall, floors etc all as specified and as directed by the Engineer-in-Charge. |
| 91 | M&L for point wiring with1.50 sqmm in copper conductor cable ( multistrand) FRLS single core PVC insulated cable in and including PVCconcealed conduit( ISI Marked) of heavy dulywith all accessories ie PVC gutties etc terminated insunken/pressed metal flush box and white modular cover plate with frame for mounting of switches /sockets/ fan regulators etc and continuous earth wire 1.5 Sqmm copper cable PVC insulated FRLS controlled by one switch for one light/fan/sockets point/all as specified and directed by Engr-in-Charge in ceiling Portionsurface conduit wiringto be done.. Note : i) Eye/bottle thimbles shall be used for connection in switches/sockets & MCB"s in DB"s without any extra cost ii) Electric rewiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for Earth.iii) Neccessary cutting chasing wherever requiredand making good the disturbed surface shall be part of job at no extra cost. |
| 92 | All as per item No 2 above, but for one 3/5 pin socket outlet 5 Amp on independent board complete all as specified and as directed by the Engineer-in-Charge. |
| 93 | All as per item No 2 above, but for one 3/5 pinsocket outlet 5 Amp on the same board with other switches complete all as specified and as directed by the Engineer-in-Charge. |
| 94 | All as per serial item No 2 here-in-before , but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor ( Multi-stranded)PVC insulated and unsheating electric cable 1100 volts(ISI Marked) including PVC insulated and unsheathedelectric cable 1100 volts 2.5 Sqmm copper stranded conductor ascontinuous earthwire connected to common earth dolly complete all as specified and as directed by Engineer-in-Charge. |
| 95 | M&L for Modular switch 1 way 6A, 1 module |
| 96 | M&L for Modular switch 1 way 16A, 1 module type all as specified and directed. |
| 97 | M&L for Modular Socket, 6A - 5 pin, 2 module typeall as specified and directed |
| 98 | M&L for Modular Socket 6A/16A - 2/3 pin, 2 module type all as specified and directed. |
| 99 | S & F in replacement of existing unserviceable FTL with new techonlgy ultra bright led tubelight with aluminium heat sink & polycarbonate diffuser having high efficacyof capacity 20 Watt Warm White withBOX TYPE Pre-coated CRCA body, heavy duty regal Batten for LED tube universal batten for G13t8 lamps including neccesary fitting on wall and making electric connection from ceiling rose to connector with suitable size of electric cable and making good the disturbed surface. |
| 100 | S & F in replacementof LED 10 Watt, 2 feet long, warm white light with NEO Batten10 W 6500K having high efficiency Cat No.LHEXACP7IN1W010.Make -Havells or equivalent makes incl necessary electric conection complete all as specified and directed by Engineer-in-Charge. |
| 101 | S & F in replacement of recess mounted LED luminaire 36 Watt warm white complete with all accessories incl cost of lamp & driver, suitable for 2x2 feet false ceiling panel complete all as specified and directed by Engineer-in-Charge. |
| 102 | S & F LED Spot/focus Light 9/10 W movable focus type with decorative metal body including LED 9/10W warm white luminaire with fixing arrangement to focus the quotes/boards/painting frames of size 1.5x1.5 mtr size including complete fixing & testing complete all as specified and directed by Engineer-in-Charge. |
| 103 | M & L for ceiling rose surface type, 65 mm x 50 mm two to three terminals/ PVC / polycarbonate, isolated body fixed on PVC block complete all specified and as directed by the Engineer-in-Charge. |
| 104 | M & L for replacement of existing earthing complete with galvanized steel earth plate electrode 600x600x6mm tthick buried directly in ground(earth plate not less than 2.25 mtr deep below the normal ground level ) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth wire 4mm dia by means of nuts bolts,washers,check nuts of iron or steel including test point PCC pits and RCC cover in PCC 1:2:4 (type B-1) including iron angle frme 40*40*6mm. and medium grade GI watering pipe 20mm dia with funnel and wire mesh and 15 mm bore GI pipe light grade proection pipeincluding excavation and charcoal ,common salt surrounded with 15cm all around the plate all as specified and shown in EP-3 of SSR Part-I |
| 105 | All as per serial item No 16 here-in-before , but for GI strip 32x6 mm size and 40 mm bore GI pipe light grade proection pipe. |
| 106 | M & L for Fan step regulator, 120W - 1 module |
| 107 | S & F ceiling fans complete with blades, down rods and accessories, 230 V, 1400 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) |
| 108 | S & Fin replacement of exhaust fans AC single phase 230/ 240 V of size 450/480 mm sweep with louver . Note: Fixing of Exhaust Fanon wall with suitable size anchor bolt , making hole in wall for groutng and making good the disturbed surface including plaster work shall be part of job at no extra cost. |
| 109 | S & Fin replacement of exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver . Note: Fixing of Exhaust Fanon wall with suitable size anchor boltall as specified and directed. |
| 110 | Supply & fix in replacement of existing unserviceable Sheet metal enclosure with new DB’s suitable for MCBs of single pole and neutral 4/6 way double door, IP_43 type with 100 amp rated bus bar. Note: i) Connnections of the MCB"S shall be done with appropriate size of brass/Cooperthimble. ii) The disturbed surface shall be match with existing shall be part of job. |
| 111 | S&FVertical three phase MCB distribution board powder coated double door flush mounted complete with locking arrangement suitable for 4 way VTPN, withMCCB of capacity 100 Amp FP, 25 KA as incomers and MCB"s as out going with rated bus bar 200 Amp link 230 volt(Note: (i) The DB shall be flush fixed ,and making good the disturbed surface matching with existing specifications shall be part of job at no extra cost.(ii)connection of theMCCBs/ MCBs with cableshall be made through appropriate size pin /bottle type thimble properly crimped.(iii)all the vacant holes of the DB shall be provided with blank plates of appropriate size. (Cost of MCCB incl in the item of rate) |
| 112 | S&FVertical three phase MCB distribution board powder coated double door flush mounted complete with locking arrangement suitable for 8 way VTPN, withMCCB of capacity 125 Amp FP, 25 KA as incomers and MCB"s as out going with rated bus bar 200 Amp link 230 volt(Note: (i) The DB shall be flush fixed ,and making good the disturbed surface matching with existing specifications shall be part of job at no extra cost.(ii)connection of theMCCBs/ MCBs with cableshall be made through appropriate size pin /bottle type thimble properly crimped.(iii)all the vacant holes of the DB shall be provided with blank plates of appropriate size. (Cost of MCCB incl in the item of rate) |
| 113 | S&F MCCB 100 Amps 4 pole, 25 KA, 415 volts grade with thermal magnetic relaese type all as specified and directed. |
| 114 | S&F MCCB 125 Amps 4 pole, 25 KA, 415 volts grade with thermal magnetic relaese type all as specified and directed. |
| 115 | S & F in replacement of existing unserviceable Sheet metal enclosure with new DB’s suitable for MCBs of single pole and neutral 8 way double door type with 200 amp rated bus bar. Note: i) Connnections of the MCB"S shall be done with appropriate size of brass/Cooperthimble. ii) The disturbed surface shall be match with existing shall be part of job. |
| 116 | S & F in replacement of existing unserviceable Sheet metal enclosure with new DB’s suitable for MCBs of single pole and neutral 12 way double door type with 200 amp rated bus bar. Note: i) Connnections of the MCB"S shall be done with appropriate size of brass/Cooperthimble. ii) The disturbed surface shall be match with existing shall be part of job. |
| 117 | S & F in replacement of MCB SP up to 6-32 Amp all as specified and directed. |
| 118 | S & F in replacement of MCB SPN 6-32 Amp complete all as specified and directed. |
| 119 | M&L for Sub main wiring with 2 runs of single core FRLSH PVC insulated unsheathed multistranded copper conductor cable of size 2x10 sqmm ( line conductor) & 1x10 sqmm ( earth conductor), 1100 volt grade drawing in & including heavy duty non metallic PVC conduit , ISI marked, incl accessories not less than 25 mm in dia & concealed in wall, roof etc including PVCinsulated, FRLSH unsheathed single core multistranded copper conductor cable, green in colour as earth conductor including cutting charges for concealed conduit wiring etc and making good cutting not exceeding 10 cm grith complete all as specified and directed. Note: (i)Electric rewiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for Earth . (ii)Connections of cables with MCBs or bus bars shall be done throughbrass/copper thimbles of appropriate size.(iii) Two runs of copper conductor cable and one run of copper earth wire including PVC conduit will be measured and paid as one unit only. |
| 120 | M&L for Sub main wiring with 2 runs of single core FRLSH PVC insulated unsheathed multistranded copper conductor cable of size 2x6 sqmm ( line conductor) & 1x6 sqmm ( earth conductor), 1100 volt grade drawing in & including heavy duty non metallic PVC conduit , ISI marked, incl accessories not less than 25 mm in dia & concealed in wall, roof etc including PVCinsulated, FRLSH unsheathed single core multistranded copper conductor cable, green in colour as earth conductor including cutting charges for concealed conduit wiring etc and making good cutting not exceeding 10 cm grith complete all as specified and directed. Note: (i)Electric rewiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for Earth . (ii)Connections of cables with MCBs or bus bars shall be done throughbrass/copper thimbles of appropriate size .(iii) Two runs of copper conductor cable and one run of copper earth wire including PVC conduit will be measured and paid as one unit only. |
| 121 | S & F in replacement of existing unserviceable Plug & Socket Box (sheet metal) with PVC Plug,SPN 20 Amps for Acs.Model No. - DHDPHSN020, Make-Havells. |
| 122 | M&L for Sub main wiring with 2 runs of single core FRLSH PVC insulated unsheathed multistranded copper conductor cable of size 2x4 sqmm ( line conductor) & 1x4 sqmm ( earth conductor), 1100 volt grade drawing in & including heavy duty non metallic PVC conduit , ISI marked, incl accessories not less than 25 mm in dia & concealed in wall, roof etc including PVCinsulated, FRLSH unsheathed single core multistranded copper conductor cable, green in colour as earth conductor including cutting charges for concealed conduit wiring etc and making good cutting not exceeding 10 cm grith complete all as specified and directed. Note: (i)Electric rewiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for Earth.(ii)Connections of cables with MCBs or bus bars shall be done throughbrass/copper thimbles of appropriate size.(iii) Two runs of copper conductor cable and one run of copper earth wire including PVC conduit will be measured and paid as one unit only. |
| 123 | M&L for Sub main wiring with 2 runs of single core FRLSH PVC insulated unsheathed multistranded copper conductor cable of size 2x2.5 sqmm ( line conductor) & 1x2.5 sqmm ( earth conductor), 1100 volt grade drawing in & including heavy duty non metallic PVC conduit , ISI marked, incl accessories not less than 25 mm in dia & concealed in wall, roof etc including PVCinsulated, FRLSH unsheathed single core multistranded copper conductor cable, green in colour as earth conductor including cutting charges for concealed conduit wiring etc and making good cutting not exceeding 10 cm grith complete all as specified and directed. Note: (i)Electric rewiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for Earth . (ii)Connections of cables with MCBs or bus bars shall be done throughbrass/copper thimbles of appropriate size . (iii) Two runs of copper conductor cable and one run of copper earth wire including PVC conduit will be measured and paid as one unit only. |
| 124 | S & F new generation energy saving and environmental friendly long life LED flood light 25 watts made up of pressure die cast alluminium housing with high power LED as light source and lense embedded PC cover having TOP OPENING separate driver compartment with IP65 protection and impact resistance of IK07,with all accessories including suitable bracket with suitable dia light grade GI pipe bend to shape, including MS clamp of size of required size and PVC cable 1.5 Sqmm twincore from ceiling rose to light fittings complete all as specified and directed. Make : Havells/Bajaj/Crompton |
| 125 | S & F new generation energy saving and environmental friendly long life LED building security light 1x25 watts made up of pressure die cast alluminium housing with high power LED as light source and lense embedded PC cover having TOP OPENING separate driver compartment with IP65 protection and impact resistance of IK07,with all accessories including suitable bracket with suitable dia light grade GI pipe bend to shape, including MS clamp of size of required sizecomplete all as specified and directed. |
| 126 | Supply, laying, testing and commissioning of cable LT XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 6 sq. mm 2 core confirming to IS specification complete all as specified and as directed . |
| 127 | Supply & lay in replacement of existing unserviceable XLPE insulated, armoured heavy dutyelectric cable with aluminium conductor, 1100 volt grade of crosssectional area 25 Sqmm 3.5 Core all as specified & directed by Engr-in-Charge. |
| 128 | Supply & lay in replacement of existing unserviceable XLPE insulated, armoured heavy dutyelectric cable with aluminium conductor, 1100 volt grade of crosssectional area 50 Sqmm 3.5 Core all as specified & directed by Engr-in-Charge. |
| 129 | Excavating in trenches n exc 1.5m wide and n exc 1.5m deep and getting out in hard/dense soil complete all as specified and directed. |
| 130 | Returning,filling in, including spreading, leveling, watering and well ramming in layers n exc 25cm complete all as specified and directed. |
| 131 | Removing excavated material n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed. |
| 132 | M & L for sand cushioning with dry river sand in trenches for cushioningof underground cable line including spreading, leveling, well ramming completed all as specified and directed. |
| 133 | Supply and laying wellburntsub class‘B’ bricks. ( designated 75) locally available best quality laid dryin trenches forprotection of underground cable all as specified and directed. |
| 134 | Material and labour for GI tubing light grade 40 mm borefor passing through cables under the floor, along the wall or along the pole complete all as specified and directed. |
| 135 | M & L for replacement of GI tubing light grade 50 mm borefor passing through cables under the floor ,along the wall or along the pole complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
