}

Tender For Work Of Conversion Of 11Kv Overhead Line Of Advalpal And Salem Village Into Underground Cable System In The Jurisdiction Of Sub Division-I(U), Bicholim, Division-V, Bicholim, bicholim-Goa

Department Of Electricity-DOE has published Tender For Work Of Conversion Of 11Kv Overhead Line Of Advalpal And Salem Village Into Underground Cable System In The Jurisdiction Of Sub Division-I(U), Bicholim, Division-V, Bicholim. Submission Date for this Tender is 21-09-2023. Overhead Line Tenders in bicholim Goa. Bidders can get complete Tender details and download the document.




Tender Notice

39405921
Tender For Work Of Conversion Of 11Kv Overhead Line Of Advalpal And Salem Village Into Underground Cable System In The Jurisdiction Of Sub Division-I(U), Bicholim, Division-V, Bicholim
Open Tender
Indian
Goa
bicholim
21-09-2023

Tender Details

Work Of Conversion Of 11Kv Overhead Line Of Advalpal And Salem Village Into Underground Cable System In The Jurisdiction Of Sub Division-I(U), Bicholim, Division-V, Bicholim

Key Value

Document Fees
INR 1500 /-
EMD
INR 1772497.0 /-
Tender Value
INR 8.86 Crore /-

BOQ Items

Name of Work: Work of conversion of 11KV overhead line of Advalpal & Salem Village into underground cable system in the jurisdiction of Sub Division-I(U), Bicholim, Division-V, Bicholim
Sl. No. Item Description
1Cost of Material
211KV Cable Work
3Supply of 11KV, 3 core 300 sq.mm A2XFY Aluminium Armoured XLPE Cable
4Supplying and filling in plinth under floors, trenches including watering ramming consolidating, dressing, complete. Sand for cushioning of HT underground cables. ( 1R : 6400 x 0.2 x 0.4) ( 2R : 1800 x 0.2 x 0.6 )
5Supply of f RCC Pipe : 100 mm dia NP2 Pipe as per GSR 2020 (Roads) item nn 1910
6Supply ofGI Pipe 150mm, class B for road crossing/bridge & cable riser
7Supply ofRCC protective covers of size 600mm long x 250mm width and 50mm thick capable of bearing load of 135Kg. And covered with earth/ sand upto depth of 0.15mts. Confirming to IS 1255-1967 at non-road crossing. (as per CEE approved drawing, enclosed)
8Supply of Bricks class design 75 kg/cm2 (1st class wire cut)
9Supply of 11 KV Straight Through joint 3 core 300sqmmXLPE
10Supply of11 KV Termination kit Indoor 3 core 300sqmmXLPE
11Supply of 11 KV Termination kit outdoor 3 core 300sqmmXLPE
12Supply ofRCC Cable route marker (400 x 900 x 100mm)
13Supply & Erection of Warning tape.
14Ring Main Unit
15Supply of 3 WAY RMU, 11KV, 630A, 21 kA 3Sec, SF6 Outdoor RMU – 2LBS + 1CB : Extensible/Non-Extensible Two (2) Motor operated load break switches (LBSs) with Manual operated earthing switches in SF6 and One (1) vacuum circuit breaker with Electrical closing and tripping along with disconnector and earthing switches SCADA Compatible and base channel. Battery charger along with batteries required for Electrical operations of RMU is in the scope of the Bidder. Each module shall consist of VPIS, FPI in LBS Module (N-1) but not less than 1 no’s per RMU. Suitable arrangement for mounting FRTU, modem or Ethernet Switch/LIU along with battery, battery charger shall be provided in RMU.
16Supply of 3 WAY RMU, 11KV, 630A, 21 kA 3Sec, SF6 Outdoor RMU – 3LBS : Extensible/Non Extensible Three (3) Motor operated load break switches (LBSs) with Manual operated earthing switches in SF6 SCADA Compatible and base channel. Battery charger along with batteries required for Electrical operations of RMU is in the scope of the Bidder. Each module shall consist of VPIS, FPI in LBS Module (N-1) but not less than 1 no’s per RMU. Suitable arrangement for mounting FRTU , modem or Ethernet Switch/LIU along with battery, battery charger shall be provided in RMU.
17Supply of 4 WAY RMU, 11KV, 630A, 21 kA 3Sec, SF6 Outdoor RMU – 2LBS + 2CB : a. Extensible/Non Extensible two (2) Motor operated load break switches (LBSs) with Motor operated earthing switches in SF6 and 2 vacuum circuit breaker with Electrical closing and tripping along with disconnector and earthing switches SCADA Compatible and base channel. Battery charger along with batteries required for Electrical operations of RMU is in the scope of the Bidder. Each module shall consist of VPIS, FPI in LBS Module (N-1) but not less than 1 no’s per RMU, Current Transformer and Numerical Relay with communication in all CB module. Suitable arrangement for mounting FRTU , modem or Ethernet Switch/LIU along with battery, battery charger shall be provided in RMU. Auxiliary PT as per specification shall be provided in RMU.
18Civil Work for Ring Main Unit
19Earthwork in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sq.m on plan) including disposal of excavated earth lead upto 50 m and lift upto 1.5m disposed earth to be leveled and neatly dressed including providing barricading, danger lighting guarding as directed in :a) All kinds of soil
20Providing and laying in position cement concrete 1:2:4(1 cement : 2 coarse sand: 4 graded granitic or basaltic stone aggregate 40 m nominal size for foundations. Dimensions for RMU for 2LBS+1CB & 3LBS = ((2.8*3/4)*.551*1.5)*2
21Centering and shuttering including struttings, propping etc and removal of formwork . Dimensions for RMU for 2LBS+1CB & 3LBS= (((2.8*3/4)*1.5*2)+(1.5*0.551*2))*2
2212mm cement plaster 1:4 (1 - cement: 4 - fine sand) for foundations. Dimensions for RMU for 2LBS+1CB & LBS = (((2.8*3/4)*0.551)+(2.8*3/4)*0.5*2)+(0.5*0.551*2))*2
2311KV Cable for RMU & Jointing Kits
24Supply of11KV, 3 core 95 sq.mm A2XFY Aluminium Armoured XLPE Cable through conventional open trenching method in any type of soil including hard laterite.
25Supply of11 KV Termination kit Indoor3 core 95sqmmXLPE
26Supply of11 KV Termination kit Outdoor3 core 95sqmmXLPE
27Supplying and filling in plinth under floors, trenches including watering ramming consolidating, dressing, complete. Sand for cushioning of HT underground cables.
28Supply of RCC protective covers of size 600mm long x 250mm width and 50mm thick capable of bearing load of 135Kg. And covered with earth/ sand upto depth of 0.15mts. Confirming to IS 1255-1967 at non-road crossing. (as per CEE approved drawing, enclosed)
29Supply ofEarthing complete with 40mm GI Pipe, 2.5 mts long alongwith 20 kgs each salt, charcoal complete.
30Supply ofHDGI flat of size 25mm x 6mm for earthing.
31Supply ofHDGI Structural Material (Such as cable supports,clamps, N&B Etc)
32Cost of Erection
3311KV Cable Work
34Laying, Testing & commissioningof 11KV, 3 core 300 sq.mm A2XFY Aluminium Armoured XLPE Cable in open trench method
35Laying, Testing & commissioningof HT/LT UG cables by trenchless technology by adopting horizontal directional drilling (HDD method). The work includes preparation of site, Boring as well as drawing of cable in Normal/hard soil including soft, watery and sandy soil with minimum 8" bore size, including Supply & Laying of HDPE pipe
36Earthwork in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sq.m on plan) including disposal of excavated earth lead upto 50 m and lift upto 1.5m disposed earth to be leveled and neatly dressed including providing barricading, danger lighting guarding as directed in :a) All kinds of soil b) All types of Ordinary rock including all types of laterite rock, blasting prohibited ( 1R : 6400 x 1.1 x 0.4) ( 2R : 1800 x 1.1 x 0.6 )
37Refilling the pipeline/foundation trenches plinth sides, foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer in Charge ( 1R : 6400 x 0.9 x 0.4) ( 2R : 1800 x 0.9 x 0.6 )
38Laying of RCC Pipe : 100 mm dia NP2 Pipe as per GSR 2020 (Roads) item nn 1910
39Laying of GI Pipe 150mm, class B for road crossing/bridge & cable riser
40Erection of RCC protective covers of size 600mm long x 250mm width and 50mm thick capable of bearing load of 135Kg. And covered with earth/ sand upto depth of 0.15mts. Confirming to IS 1255-1967 at non-road crossing. (as per CEE approved drawing, enclosed)
41Erection, Testing & Commissioning of 11 KV Straight Through joint 3 core 300sqmmXLPE
42Erection, Testing & Commissioning of of 11 KV Termination kit Indoor 3 core 300sqmmXLPE
43Erection, Testing & Commissioning of of 11 KV Termination kit outdoor 3 core 300sqmmXLPE
44Erection of RCC Cable route marker (400 x 900 x 100mm)
45Ring Main Unit
46Erection, Testing & Commissioning of 3 WAY RMU, 11KV, 630A, 21 kA 3Sec, SF6 Outdoor RMU – 2LBS + 1CB : Extensible/Non-Extensible Two (2) Motor operated load break switches (LBSs) with Manual operated earthing switches in SF6 and One (1) vacuum circuit breaker with Electrical closing and tripping along with disconnector and earthing switches SCADA Compatible and base channel. Battery charger along with batteries required for Electrical operations of RMU is in the scope of the Bidder. Each module shall consist of VPIS, FPI in LBS Module (N-1) but not less than 1 no’s per RMU. Suitable arrangement for mounting FRTU, modem or Ethernet Switch/LIU along with battery, battery charger shall be provided in RMU.
47Erection, Testing & Commissioning of 3 WAY RMU, 11KV, 630A, 21 kA 3Sec, SF6 Outdoor RMU – 3LBS : Extensible/Non Extensible Three (3) Motor operated load break switches (LBSs) with Manual operated earthing switches in SF6 SCADA Compatible and base channel. Battery charger along with batteries required for Electrical operations of RMU is in the scope of the Bidder. Each module shall consist of VPIS, FPI in LBS Module (N-1) but not less than 1 no’s per RMU. Suitable arrangement for mounting FRTU , modem or Ethernet Switch/LIU along with battery, battery charger shall be provided in RMU.
48Erection, Testing & Commissioning of 4 WAY RMU, 11KV, 630A, 21 kA 3Sec, SF6 Outdoor RMU – 2LBS + 2CB : a. Extensible/Non Extensible two (2) Motor operated load break switches (LBSs) with Motor operated earthing switches in SF6 and 2 vacuum circuit breaker with Electrical closing and tripping along with disconnector and earthing switches SCADA Compatible and base channel. Battery charger along with batteries required for Electrical operations of RMU is in the scope of the Bidder. Each module shall consist of VPIS, FPI in LBS Module (N-1) but not less than 1 no’s per RMU, Current Transformer and Numerical Relay with communication in all CB module. Suitable arrangement for mounting FRTU , modem or Ethernet Switch/LIU along with battery, battery charger shall be provided in RMU. Auxiliary PT as per specification shall be provided in RMU.
4911KV Cable for RMU & Jointing Kits
50Erection, Testing & Commissioning of 11KV, 3 core 95 sq.mm A2XFY Aluminium Armoured XLPE Cable through conventional open trenching method in any type of soil including hard laterite.
51Erection, Testing & Commissioning of of 11 KV Termination kit Indoor3 core 95sqmmXLPE
52Erection, Testing & Commissioning of of 11 KV Termination kit Outdoor3 core 95sqmmXLPE
53Earthwork in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sq.m on plan) including disposal of excavated earth lead upto 50 m and lift upto 1.5m disposed earth to be leveled and neatly dressed including providing barricading, danger lighting guarding as directed in :a) All kinds of soil b) All types of Ordinary rock including all types of laterite rock, blasting prohibited
54Refilling the pipeline/foundation trenches plinth sides, foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer in Charge
55Erection of RCC protective covers of size 600mm long x 250mm width and 50mm thick capable of bearing load of 135Kg. And covered with earth/ sand upto depth of 0.15mts. Confirming to IS 1255-1967 at non-road crossing. (as per CEE approved drawing, enclosed)
56Erection, Testing & Commissioning of Earthing complete with 40mm GI Pipe, 2.5 mts long alongwith 20 kgs each salt, charcoal complete.
57Erection of HDGI flat of size 25mm x 6mm for earthing.
58Erection of HDGI Structural Material (Such as cable supports,clamps, N&B Etc)
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail