Military Engineer Services-MES has published Tender For Repair Maintenance Of Electrical Hot Water Apparatus Geysers And Rewinding Of Ceiling Fans Exhaust Fans With All Accessories At Rms. Submission Date for this Tender is 25-09-2023. Electrical Maintenance Tenders in Dimapur Nagaland. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 08-Sep-2023 | AMENDMENT IN BOQ FOR REPAIR MAINT OF ELECTRICAL HOT WATER APPARATUS GEYSERS AND REWINDING OF CEILING FANS EXHAUST FANS WITH ALL ACCESSORIES AT RMS | BOQ | 16-09-2023 |
| 2 | 08-Sep-2023 | AMENDMENT IN DATES FOR REPAIR MAINT OF ELECTRICAL HOT WATER APPARATUS GEYSERS AND REWINDING OF CEILING FANS EXHAUST FANS WITH ALL ACCESSORIES AT RMS | Date | 25-09-2023 |
| Sl. No. | Item Description |
| 1 | Taking down Ceiling fan/Exhaust fan, sealing cable end, dismantling blades and removing fan and blades to store after repair Hanging ceiling fan/Exhaust fan and connecting up including provision of cable from ceiling rose or connector to fan etc complete all as specified and as directed. |
| 2 | Painting of ceiling fan/Exhaust fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as specified and as directed. |
| 3 | Dismantling and taking out burnt copper winding from ceiling fan of sweep 1200mm any make, model, type and rewinding the same with new super enameled copper wire of similar gauge and number of turns as exists for full speed, including cleaning and greasing of bearing/bushes, taping, varnishing, heating and replacement of defective parts and reassembling of fan motor and refixing the fan after testing complete to the entire satisfaction of the Engr-in-Charge. Note:- Contractor shall arrange repair/rewinding of ceiling fans work in RMS/Dimapur area with suitable winding machine and connected acessories. Spare parts shall be measured andpaid under respective |
| 4 | Dismantling and taking out burnt copper winding from ceiling fan of sweep 1400mm any make, model, type and rewinding the same with new super enameled copper wire of similar gauge and number of turns as exists for full speed, including cleaning and greasing of bearing/bushes, taping, varnishing, heating and replacement of defective parts and reassembling of fan motor and refixing the fan after testing complete to the entire satisfaction of the Engr-in-Charge. Note:- Contractor shall arrange repair/rewinding of ceiling fans work in RMS/Dimapur area with suitable winding machine and connected acessories. Spare parts shall be measured andpaid under respective |
| 5 | Dismantling and taking out burnt copper winding from Exhaust fan 300mm sweep of any model any make, any type and rewinding the same with new super enameled copper wire of similar gauge and number of turns as exists for full speed, including cleaning and greasing of bearing/bushes, taping, varnishing, heating and replacement of defective parts and reassembling of fan motor and refixing the fan after testing complete to the entire satisfaction of the Engr-in-Charge. Note:- Contractor shall arrange repair/rewinding ofExhaust fan 300mm sweep work in RMS/Dimapur area with suitable winding machine and connected acessories. Spare parts shall be measured andpaid under respective items |
| 6 | Dismantling and taking out burnt copper winding from Exhaust fan 380mm sweep of any model any make, any type and rewinding the same with new super enameled copper wire of similar gauge and number of turns as exists for full speed, including cleaning and greasing of bearing/bushes, taping, varnishing, heating and replacement of defective parts and reassembling of fan motor and refixing the fan after testing complete to the entire satisfaction of the Engr-in-Charge. Note:- Contractor shall arrange repair/rewinding ofExhaust fan 380mm sweep work in RMS/Dimapur area with suitable winding machine and connected acessories. Spare parts shall be measured andpaid under respective items |
| 7 | Dismantling and taking out burnt copper winding from Exhaust fan 400-450mm sweep of any model any make, any type and rewinding the same with new super enameled copper wire of similar gauge and number of turns as exists for full speed, including cleaning and greasing of bearing/bushes, taping, varnishing, heating and replacement of defective parts and reassembling of fan motor and refixing the fan after testing complete to the entire satisfaction of the Engr-in-Charge. Note:- Contractor shall arrange repair/rewinding ofExhaust fan 400-450mm sweep work in RMS/Dimapur area with suitable winding machine and connected acessories. Spare parts shall be measured andpaid under respective items |
| 8 | Taking down and Supply and fixing PVC Exhaust fan PVC150 mm sweep single phase 50 Hz AC, air flow rate of1350 RPM including fixing on wall with suitale fastners, making holes of suitable size and making good distrubed surfaces area complete all as specified anddirected by Engr-in-Charge. Note : Old Exhaust fan shall be deposited to MES AGE(E/M) Store |
| 9 | All as per item No 8.00 here-in-before but 200 mm sweep single phase 50 Hz AC complete all as specified and as directed. |
| 10 | All as per item No 8.00 here-in-before but 250 mm sweep single phase 50 Hz AC complete all as specified and as directed. |
| 11 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified and as directed. Note : Old Exhaust fan shall be deposited to MES AGE(E/M) Store |
| 12 | Supply & Fixing 1200mm BLDC 5 star ceiling fan with regulator enable motor power * input 27 watt with 10% tolerance *, motor insulation B type , 230-240V 50Hz AC supply 350 rpm , * 225 CMMair delivery*, service value *minimum 7.4* with complete set 3 blade , canopy,down rod , Shackle remaining all accessories including nut & bolt washer as required & directed . Note : Old Ceiling fan shall be deposited to MES AGE(E/M) Store |
| 13 | Supply and fixing Wall mounted fan 400 mm sweep PP Blade and thermal overload protection for long lasting motor power consumation 58 Watt fan motor speed 1330 RPM Air dilivery 85 (CMM) with accessories complete all as specified and as directed by Engr-in-Charge. Note : Old Wall mounted fan shall be deposited to MES AGE(E/M) Store |
| 14 | Supply and fixing standing pedestal fan 400 mm sweep wide oscillation with motorised control smooth neck tilting, strong base for stability ABS Blade stand thermal overload protection finger proof grill power consumation 62 Watt fan motor speed 1350 RPM Air dilivery 85 (CMM) with accessories complete all as specified and as directed by Engr-in-Charge. Note : Old Standing pedestal fan shall be deposited to MES AGE(E/M) Store |
| 15 | S&F Fan capacitor of capacity 2.5 MFD (Make: Universal/Usha) |
| 16 | S&F Fan capacitor of capacity 4.0 MFD (Oil filled) Make Universal/ Usha. |
| 17 | S&F Ball bearing/Bush bearingsuitable for ceiling fan,of any sweep. Makeof bearing-TATA,NBC,SKF (6201 to 6204) |
| 18 | M&L for Fan clamp MS including nut, bolt, rubber reel, split pin complete of suitable size 1200/1400 mm |
| 19 | M&L for Flexible wire, copper conductor,Twin twisted multicore cable 2 core High Quality twin core flat wire of size 40/.0076 Sqmm wire. Make Plaza/Richa/RR Kabel |
| 20 | S&F Top/bottom canopy suitable for ceiling fan of any sweep, make, model and type. Set of two |
| 21 | M&L for Down rod made out of GI tubing medium grade with both side thread & hole of 15mm two feet long |
| 22 | S&F Ceiling fan 1200/1400mm sweep Upper Cabinet motor Cover complete all as specified and directed. |
| 23 | S&F Ceiling fan 1200/1400mm sweep lower Cabinet motor Cover complete all as specified and directed. |
| 24 | S&F Ceiling fan set of 3 blade 1200/1400mm sweep etc complete all as specified and directed. |
| 25 | Supply , Fixing and testing of vertical type wall mounted storage water heater of Capacity 25Ltrs BEE 5 Star rated or minimum Standing Loss of 0.511 kWh , 240V, 50Hz with Maximum power consumption of 2KW , dry powder fero glass line coating technology * for inner tank with *incoloy heating element * with minimum * 4 years warranty , ABS outer body , 2 units of PVC connector pipe with length of 450mm length for hot and cold water supply with etc complete all as specified and directed. |
| 26 | Dismantling of storage type water heater (Geyser) of 25/35/50 ltrs capacity, any make, vertical or horizontal type, mounted on wall by disconnecting electric and water supply connection and keeping the same in safe custody for carrying out necessary repair/replacement of UNSV parts/components including descaling of the geyser tank by using proper liquid chemical and re-assambling & refixing the same all as directed by the Engr-in-Charge. (Note: UNSV items for renewal shall be measured and paid seprately under respective itme here-in- after as supply only). Make: Jilco/Havells/Indosian/Bajaj/CG |
| 27 | Supply & fixing following items for water heater and geyser of any type model and make all as directed by Engr-in-Charge. |
| 28 | Heavy duty PK Aqua 2 feet hot water connection for geyser hose pipe both cold and hot (set of two)water line with adopter and washer at both ends of the pipe. |
| 29 | Indicator lamp round/rectangular complete all as specified and as directed. |
| 30 | Thermostat for geyser 30 to 75 degree centigrade.Make: Thecha/DasPass/Victor |
| 31 | Auto cut-off electric water heater geyser temperature controlling sensor any capacity complete all as specified and as directed. |
| 32 | Push type copper heating element of 1.5 KW capacity complete all as specified and as directed.. |
| 33 | All as per item No 27.05 above but push type 2.00 KW capacity complete all as specified and as directed. |
| 34 | Glass wool in between outer cell and containercomplete all as specified and as directed. |
| 35 | Storage tank 25/50ltrs and including assemble with rubber, nuts, washers etcfor geyserof capacity 25/50 ltr, any make any type complete all as specified and as directed. |
| 36 | switch socket combination 5 pin,15 Amp multipurpose complete all as specified and as directed. |
| 37 | 15 Amp plug Top suitable for 15 amp socket complete all as specified and as directed. |
| 38 | 2.5 Sqmm wire 3 Core for geyser connection complete all as specified and as directed. |
| 39 | Geyser 25/50Ltrs capacity outer cover suitable size of any make complete all as specified and as directed. |
| 40 | Cleaning of geysers any type and size/make all as specified and directed by Engr-in-Charge. |
| 41 | Supply & fixing for Element Assembly (Glass coated ) suitable 25 Ltrs (GL WH models) including taking down complete all as specified and as directed. Make : Bajaj or equivalent as approved by GE. |
| 42 | S & F of metal fasteners of 12mm diax100mm long for fixing geyser complete as specified and as directed. Make : Anchor |
| 43 | S&F for DBOXx MCB protected socket pvc plastic base of size 46.5 x42.8 x26 CM with single pole MCB SP 25 Amps etc complete all as specified and as directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
