Construction Of Sdm Office Cumresidence Sankoo Along With Allied Facilities Viz Conference/Metting Hall At Sankoo. (Constt. Of Sdm Office/Residence Qtr/Chowkidar Qtr And Electrification ). Under Sdp
Tender Value
Ref. Documents
Estimated cost
Bid Submission
15 Sep 2023
0 days left
EMD
8.76 Lakhs
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
sankoo → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Sdm Office Cumresidence Sankoo Along With Allied Facilities Viz Conference / Metting Hall At Sankoo. ( Constt. Of Sdm Office / Residence Qtr / Chowkidar Qtr And Electrification ) . Under Sdp
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual means over areas (Exceeding 30 em and upto 1.5 mtr in depth. I mtr in width as well as 10 sqm. on plan) including disposal of excavated earth upto I Intr from cutting edge. disposed ealth to be leveled and neatly dressed inall kind of soil. @20% |
| 2 | odinary rock @20% |
| 3 | Hard Rock @60% (BP) |
| 4 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan,including dressing of sides and ramming of bottoms lift upto1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50metres: as directed by Engineer-in-charge.@20% |
| 5 | odinary rock @20% |
| 6 | Hard Rock @60% (BP) |
| 7 | Filling available excavated earth (excluding rock) in trenches plinth, sides of foundation etc in layer not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, lead upto 50cm and lead up to 50 m and lift upto 1.5 mtr. |
| 8 | STONE SOLLING Dumping of stone including cost of stone (inhorizontal on level) |
| 9 | Providing and laying position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 20 mm nominal size) (crushed) |
| 10 | Providing and laying position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) (crushed) |
| 11 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.50 mm thick with 20mm nominal size stone aggregate. |
| 12 | Reinforced cement concrete work in FootingPedestal,Columns , beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement withM25 (1:1:2) (1 cement : 1 coarse sand : 2 graded stone aggregate 20 mm nominal size) |
| 13 | Reinforcement for RCC work including straightening, bending, and cutting, placing in position and binding all complete .Hot rolled deformed bars.including all carraige complete |
| 14 | a) Column, pillars piers, abutment posts and struts. Etc |
| 15 | Centering and shuttering including strutting, propping etc. and removal of form for: Columns, pillars, piers, abutments, posts and struts. |
| 16 | Centering and shuttering including strutting, propping etc. and removal of form for: Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 17 | Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platform. |
| 18 | Providing and laying autoclaved aerated cement blocks masonry with 300 mm thick AAC blocks in superstructure above plinth level upto floor V level in cement mortar 1:4 (1 Cement : 4 coarse sand ) and curing complete. The rate includes providing and placingin position 2 nos. 6 mm dia M.S bars at every third course of masonry work. |
| 19 | Providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position in cement mortar 1:3 (1cement:3 coarse sand), cost of required centring, shuttering and curing complete 1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20 mm nominalsize) |
| 20 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or dash fastener shall be paid for seperately) First class teak wood |
| 21 | Providing and fixing panelled and glazed shutters for doors, windows and clerestory windows, including ISI markedM.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will bepaid for seperately,all complete as per direction of Engineer- in-charge.(second class teak wood35 mm thick shutter) |
| 22 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40mm thick.Second Class teak wood |
| 23 | Providing and fixing factory made uPVC AIS or FENISTA orKOEMMERLING make white/wood Finish colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary Casement cum fixed panel window having both end single casement panel, middle fixed panels and at top completely fixed ventilator with S.S friction hinges (350 x 19 x 1.9) made of (big series) frame 67 x 60 mm , sash 67 x 80 mm &mullion 67 x 80 mm all having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area of window above 3.00 sqm upto 5.00 sqm). |
| 24 | Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of1.9 ± 0.2 mm and single glazing bead of appropriatedimension. (Area upto 0.75 sqm.) |
| 25 | Providing and fixing casement handle made of zinc alloyed (white powder coated) for UPVC casement window with necessary screws etc. complete. |
| 26 | Providing and fixing DGU ( with <0.25 SHGC and >0.35 VLT glazing in uPVCwindow, ventilator shutters and partitions etc. with proper sealing as per norms etc.complete as per the architectural drawings and the directions of engineerin- charge. ( Note : DGU with <0.25 SHGC and>0.35 VLT)TOUGHENED DGU glass panes of 5.0 mm thickness SAINT GOBAIN / ASAHI INDIA GLASS /HNGIL makeasapproved by engineer in charge Qty vide window openings @80% |
| 27 | Pebble dash plaster upto 10m height above ground levelwith a mixture of washed pebble or crushed stone 6mm to 12.5mm nominal size dashed over and including freshplaster in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 Coarse sand) and top layer 10mm cement plaster with cement mortar 1:3 (1 cement: 3 fine sand)mixed with 10% finely grounded hydrated lime by volume of cement. |
| 28 | CEMENT PLASTER (IN COARSE SAND) 12mm Cementplaster of mix 1 : 4 ( 1 cement : 4 coarse sand) (PPC or cement with >25% flyash is recommended.) |
| 29 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even andsmooth complete. |
| 30 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer (Note: It Should have Low or No VOC as per Green Building guidelines) |
| 31 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. (Note: It Should have Low or No VOC as per Green Building guidelines)New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm.(Note: It Should have Low or No VOC as per GreenBuilding guidelines) |
| 32 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)(Note: It Should have Low or No VOC as per Green Building guidelines) |
| 33 | Preparing newly primed wooden surface for painting by way of filling of putty sand papering rubbing complete. |
| 34 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work.(Note: It Should have Low or No VOC as per Green Building guidelines) |
| 35 | Providing & Fixing finished brass hanging type floor door stopper with necessary screws etc complete. |
| 36 | Providing and laying vitrified floor tiles in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete i.e Size of tile 600x600 mm (Kajaria/Somany/Cera or Any approved Brand as per Engineer In charge) |
| 37 | Kota stone slab 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm ( average) thick cement mortar 1:3 (1 cement:3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing, polishing and curing complete. |
| 38 | Extra for pre finished nosing to treads of steps of kota stone |
| 39 | P/F 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer) of approved make in colours, shades except burgundy bottle green, black of any size asapproved by engineer-in-charge in Skirting, risers of steps, and dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 course sand) and jointing with grey cement slurry @3.3kg/sqm including pointing the joint with white cement and matching pigments etc., complete. |
| 40 | Providing and fixing water closet squatting pan ( Indian typeW.C. pan) with 100 mm sand cast Iron P or Strap, 10 litre low level P.V. C. flushing cistern including flush pipe (of approved make) \"manually controled device (handle lever)conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. (Note : It should have flush rate of with Flush rate of 4/2 Litre per Flush or less ) (Dual flush 4/2L WC cistern with bottom inlet for compact back to wall Rimless toilet)Orissa pattern white vitreous china W.C. pan of size 580x440 mm with integral type foot rests. JAGUAR/CERA Make |
| 41 | Providing and fixing white vitreous china pedestal type water closet (European type W.C . .pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever requied:W.C. pan with lSI marked white solid plastic seat and lid. JAGUAR/CERA Make |
| 42 | Providing and fixing wash basin with C.I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps JAGUAR / CERA/HINDWARE Make |
| 43 | P/F of mirrors of superior glass with plastic moulded frame(of approved quality) and of required size and shape. With 6mm thick hard board backing. Rectangular Shape 1500 x 450 mm |
| 44 | Providing and fixing soil waste & vent pipe (Prince or any other appoved brand as per Engineer In Charge PVC Pipe. 110mm dia (10 feet unit Length) |
| 45 | PVC Pipe. 75mm dia (10 feet unit Length) |
| 46 | PVC Bend 110mm dia |
| 47 | PVC Bend 75mm dia |
| 48 | PVC Tee 110mm dia |
| 49 | PVC Tee 75mm dia |
| 50 | PVC Collar 110mm dia |
| 51 | PVC Collar 75mm dia |
| 52 | PVC trap 110mm dia |
| 53 | PVC trap 75mm dia |
| 54 | PVC Socket 110mm dia |
| 55 | PVC Socket 75mm dia |
| 56 | PVC door junction 110mm dia |
| 57 | PVC door junction 75mm dia |
| 58 | Providing and fixing 3 layer Thermex Pipe PP-R (Poly propylene Random copolymer)pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.PVC Pipe. 110mm dia (10 feet unit .incld. all fitting Type CLength)PN-16 pipe , 25mm OD(SDR-7.4) |
| 59 | (ii) PN-16 pipe , 32mm OD(SDR-7.4).incld. all fitting Type C |
| 60 | P/F CP brass toilet paper holder including cost of wodden,PVC,play etc. |
| 61 | Providing and fixing Wall mount Liquid Soap Dispenser ofapproved brand |
| 62 | Providing and fixing accessories of standard and quality make of approved manufacturer including all necessary fixtures required.A L-Drops for room door |
| 63 | T- Bolt for doors |
| 64 | Handles for door |
| 65 | 15 mm C.P. brass tap with elbow operation lever ofapproved brand and manufacture |
| 66 | 15 mm C.P. brass 2 in 1 tap of approved quality conforming to IS standards |
| 67 | 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 68 | 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms |
| 69 | C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-incharge. |
| 70 | Providing and fixing Stainless steel SS-304 Grade L Shaped 90° Wall Mounted Grab barsNear EWC (European Water Closet) of approved brand for Disable- friendly Bathroom/Toilets as per standard and specification. |
| 71 | Providing and fixing Stainless steel SS-304 Grade Foldable Grab bar For Disable-friendly Bathroom/toilets Make: Jaquar/ Equivalent per standard and specification. |
| 72 | 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg. |
| 73 | High water pressure S.S geyser connection pipe (2 feet long) of approved quality and make, |
| 74 | 15 mm C.P. brass ABS Health FaucetJet Spray with Hose and Holder of approved quality conforming to IS standards (KOHLER/JAGUAR/CERA) |
| 75 | Supply installation testing and commissioning of Geyser 50ltr Capacity horizontally mounted of approved brand (Havells/Bajaj/Crompton or any othet approved brand as per engineer in charge including all fixtures , bolts all complete |
| 76 | Providing and Fixing Handles with lock system of main doors LAPO Premium Rose Mortise Door Lock Handle Set/ Mortise Lock with Brass Lock Body and 70mm Brass Cylinder Set with 3 Brass Computer Keys / Zinc Alloy Weather Proof (Matt Finish) or Godrej Locking Solutions and Systems Gloria Antique Brass Door Handle with Lock Set 2C for Home and Office Entrance Door (200 mm, Gold) or any other approved brand as per engineer incharge |
| 77 | Providing and installation ofPUF (Puf Insulated Tanks) water tank capacity 1000 ltrs of approved brand (SYNTEX OR ANY OTHER APPROVED BRAND) as per directionengineer incharge |
| 78 | Design Supply and installation/Fixing staircase railling of stainless steel (Grade 304) railing(Top Handrail Dia> 50mm , two number intermediate Horizontal tubes Dia>25mm and Rectangular Two Pair Balusters Dia >38mm @1000mm C/C) made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) including fixing the railing with necessary accessories , newal post , balusters and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, necessary screws/fixtures complete jobas approved by engineer incharge (Note : No additional payment shall be made to master pillar/Newal Post ) |
| 79 | Design Supply and installation/Fixing stainless steel SS-304 Grade wall mounted handrail 40-45mm in diaincluding wall brackets at a spacing of 1.2m-1.5 with necessary accessoriesand stainless steel dash fasteners, stainless steel bolts etc. of required size, along staircase wall , corridors with suitable arrangement as per drawings and approval of Engineer-in-charge |
| 80 | Providing wood work in frames ofwalls,false ceiling, partitions etc. sawn and fixed in position :Budloo / Fir wood (Note : False Celling Design should be as perengineer in charge which may be of different level celling) |
| 81 | Providing and fixing 12 mm thick tongued and grooved Pine wood(Soft Wood ) 4-5 inch in width panelling or wall panels in walls and celingincludining all necessary fixtures including cornice with necessary screws, priming coat on exposed surface etc., complete. Brand - Rait Wood |
| 82 | Preparing newly prepared panneled surface for polishing by way of filling of putty , sealer andsand papering rubbing and applying hard polish,glossy polish in sequance over the prepared surface complete job |
| 83 | Providing and fixing thermal insulation with specified wool and density conforming to IS: 8183, 50 mm thick, wrapped in 200G Virgin Polythene bags fixed to walls with screws, rawl plugs and washers and held in position by criss- crossing GI wire etc. complete as per directions of Engineer- incharge. |
| 84 | Providing and fixing 20mm-25mm Thick Nitrile Butadiene rubber (NBR) Calss 0, highly flexible, closed cell insulation material with high water vapour diffusion resistance and low thermal conductivity to prevent condnsation , reduce ebergy losses placed in wooden framework of walls for better thermal insulation of walls. |
| 85 | Providing and laying roof insulation with 40 mm thick impervious sprayed, closed cell free Rigid Polyurethane foam over deck insulation conforming to IS - 12432 Pt. III (density of foam being 40-45 kg/cum), over a coat of polyurethane primer applied @ 6-8 sqm per liter, laying 400 G polythene sheet over PUF spray and providing a wearing course of 40 mm thick cement screed 1: 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) in chequered rough finish, in panels of 2.5m x 2.5 m and embedding with 24 G wire netting and sealing the joints with polymerized mastic, all complete as per direction of Engineer-in-Charge.. |
| 86 | Wooden planking, tongued and grooved in flooring including fixing with iron screws complete:25 mm thick Second class teak wood |
| 87 | Supply and installation of High Quality self regulating heat tracerfor Specialized Heating Solutions for Winterisationof water pipeline including all accessoriescomplete including Supply and installation ofCircuit Control Panel with RCBO MCB ,THERMOSTAT (0-120) DEG C, powerconnector-two way-6 sq.mm, w.p. splice connector,w.p. tee connector,end seal,mounting kit-w.p. jb,g.i. pipe strap 4\",al. adhesive tape roll( 50 mm w x 20 m l),f.g. adhesive tape roll (DANFOSS Make OR CHROMALOXany other approved brand as per the direction of Engineer-In-Charge) |
| 88 | Supplying and fixing High Quality32mm ThickNitrile Insulation Tube for water pipelineof approved brand2 InchSize (Armaflex Class-o Armacell) including alumunium duct clading (Alumunium Sheet Guage Thickness = 0.46MM TO 0.71MM )of approved quality and finish as per the direction of engineer in charge |
| 89 | Supply and installation of Reflective Bubble Aluminum Foil Insulation / Aluminium Silver Bubble Sheet 210 GSM (7 mm) ThickLight Weight Reflective Insulation , Max Withstanding Temperature -40 degree To +110 Degree Waterproof insulation all complete |
| 90 | Supply and installation ofelectrical Underfloor heating mats for floor heating systemsnon-corrosive, flexible heating elements including cables, pre formed cable mats including smart thermostatand digital electrical control panel all complete (STIEBEL ELTRON / DANFOSSOr any other approved brand |
| 91 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound@ 0.253 kg/sqm.(b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm.(c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg./sqm. and coarse sand @1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around.(d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately)For the purpose of measurement the entire treated surface will be measured. |
| 92 | Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixedusing self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 93 | Supply & fixing of 12mm clear toughened/Heat strength (HS) laminated Glass+2.28mm PVB layer of + 12mm clear toughned/Heat strength (HS)laminaated glass for skylight approved band (SAINT GOBIN/ASHAI/MODI GUARD). |
| 94 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat ofapproved steel primer all complete. Welded all carraige complete. |
| 95 | COST OFPVC WHEELED DUSTBINS 120L OF DIFFERENT COLOURS FOR SEGREGATED WASTE COLLECTION WITH FOOT PEDAL |
| 96 | Supply and installation of ABC Fire Extinguisher, 6 Kg 4Sets (Note : It should be Halon free) |
| 97 | Provision for providing and fixing ornamental Shingstak (Ladakhi wood carving over exterior Windows and main entrance door) (Design as per the direction of Engineer-In- charge.) including polishing all complete |
| 98 | SITC Stainless SteelWater Purifier & Dispenser 20ltr Filtered Warm & Cold water (455 x 450 x 1370 mm) of approved brand (CONVEY/KENT/BLUESTAR OR equivalent) |
| 99 | Providing and fixing wooden colour aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) 2.5 Kg/m10 Gauge Thickness, Powder coated aluminum (minimum thickness of powder coated 50 microns) |
| 100 | Providing and fixing wooden colour aluminum work For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM (2.3 Kg/m10 Gauge Thickness) |
| 101 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic item.)TOUGHENED DUG glass panes for ALUMINIUM FRAMES of 5.0 mm thickness SAINT GOBAIN / ASAHI INDIA GLASS /HNGIL make asapproved by engineer in charge Qty vide window openings @80% |
| 102 | Supply & Fixing Display notice pin up board or white writing board of required size, aluminum beeding of 12 mm and fixed with required numbers of rawls plugs stainless steel srew as per direction of Unit Incharge. |
| 103 | Design , supplying installation , inspection , testing and commisioning of 10 passender (680)Kg Machine Room-less lift conforming to latest lift act and modern left design in the existing lift well,the lift shall have various features as given below and as per specification attached. (makeOTIS , Johson , Kone , thyssenkrupp, Schindler , Mistsubishi) type of lift: Passeneger lift. capacity of the left:8passenger (620 Kg) speed: 1.0 Meter / second approx , Travel of the left 12.00 meter app No. pf speedGround +2 upper floor with 3 stops and 3 landing all on the same side controller.aspr direction of site Direction |
| 104 | Earth work in bulk excavation by mechanical means over areas (Exceeding 30 em and upto 1.5 mtr in depth. I mtr in width as well as 10 sqm. on plan) including disposal of excavated earth upto I Intr from cutting edge. disposed ealth to be leveled and neatly dressed in : all kind of soil. |
| 105 | Soft Rock. |
| 106 | Hard rock(PB) |
| 107 | Earth work in bulk excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: as directed by Engineer-in-charge.all kind of soil. |
| 108 | soft Rock. |
| 109 | Hard Rock.(PB) |
| 110 | Filling available excavated earth (excluding rock) in trenches plinth, sides of foundation etc in layer not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, lead upto 50cm and lead up to 50 m and lift upto 1.5 mtr. |
| 111 | STONE SOLLING Dumping of stone including cost of stone (inhorizontal on level) |
| 112 | Providing and laying position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size) (crushed) |
| 113 | Providing and laying position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) (crushed) |
| 114 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.50 mm thick with 20mm nominal size stone aggregate. |
| 115 | Reinforced cement concrete work in Footing , Pedestal ,Columns , beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement withM25 (1:1:2) (1 cement : 1 coarse sand : 2 graded stone aggregate 20 mm nominal size) |
| 116 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. all carraige complete |
| 117 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundation, footing bases of column |
| 118 | Centering and shuttering including strutting, propping etc. and removal of form for: Columns, pillars, piers, abutments, posts and struts. |
| 119 | Centering and shuttering including strutting, propping etc. and removal of form for: Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 120 | Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platform. |
| 121 | Providing and laying autoclaved aerated cement blocks masonry with 200 mm thick AAC blocks in superstructure above plinth level upto floor V level in cement mortar 1:4 (1 Cement : 4 coarse sand ) and curing complete. The rate includes providing and placing in position 2 nos. 6 mm dia M.S bars at every third course of masonry work.including al carraige conplete. |
| 122 | Providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position in cement mortar 1:3 (1cement:3 coarse sand), cost of required centring, shuttering and curing complete 1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20 mm nominalsize) |
| 123 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or dash fastener shall be paid for seperately) First class teak wood |
| 124 | Providing and fixing panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for seperately,all complete as per direction of Engineer-in-charge.(Second class teak wood 35 mm thick shutter) |
| 125 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40mm thick.Second Class teak wood |
| 126 | Providing and fixing factory made uPVC AIS or FENISTA or KOEMMERLING make white/wood Finish colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sashshall be mitred cut and fusion welded at all corners, mullion (if required)Casement cum fixed panel window having both end single casement panel, middle fixed panels and at top completely fixed ventilator with S.S friction hinges (350 x 19 x 1.9) made of (big series) frame 67 x 60 mm , sash 67 x 80 mm &mullion 67 x 80 mm all having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area of window above 3.00 sqm upto 5.00 sqm). |
| 127 | Providing and fixing factory made uPVC ofAIS or FENISTA or KOEMMERLING make white/Wood Finish colour fixed glazed windows/ventilators comprising ofuPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.). |
| 128 | Providing and fixing casement handle made of zinc alloyed (white powder coated) for UPVC casement window with necessary screws etc. complete. |
| 129 | Providing and fixing DGU ( with <0.25 SHGC and >0.35 VLT glazing in uPVCwindow, ventilator shutters and partitions etc. with proper sealing as per norms etc. complete as per the architectural drawings and the directions of engineerin- charge. ( Note : DGU with <0.25 SHGC and >0.35 VLT)TOUGHENED DGU glass panes of 5.0 mm thickness SAINT GOBAIN / ASAHI INDIA GLASS /HNGIL make asapproved by engineer in chargeQty vide window openings @80% |
| 130 | Pebble dash plaster upto 10m height above ground level with a mixture of washed pebble or crushed stone 6mm to 12.5mm nominal size dashed over and including fresh plaster in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 Coarse sand) and top layer 10mm cement plaster with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement. |
| 131 | CEMENT PLASTER (IN COARSE SAND) 12mm Cement plaster of mix 1 : 4 ( 1 cement : 4 coarse sand) (PPC or cement with >25% flyash is recommended.) |
| 132 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 133 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer (Note: It Should have Low or No VOC as per Green Building guidelines) |
| 134 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. (Note: It Should have Low or No VOC as per Green Building guidelines) New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm.(Note: It Should have Low or No VOC as per Green Building guidelines) |
| 135 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)(Note: It Should have Low or No VOC as per Green Building guidelines) |
| 136 | Preparing newly primed wooden surface for painting by way of filling of putty sand papering rubbing complete. |
| 137 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work.(Note: It Should have Low or No VOC as per Green Building guidelines) |
| 138 | Providing & Fixing finished brass hanging type floor door stopper with necessary screws etc complete. |
| 139 | Providing and laying vitrified floor tiles in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete i.e Size of tile 600x600 mm (Kajaria/Somany/Cera or Any approved Brand as per Engineer In charge) |
| 140 | Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) |
| 141 | P/F 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer) of approved make in colours, shades except burgundy bottle green, black of any size asapproved by engineer-in-charge in Skirting, risers of steps, and dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 course sand) and jointing with grey cement slurry @3.3kg/sqm including pointing the joint with white cement and matching pigments etc., complete. |
| 142 | Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level P.V. C. flushing cistern including flush pipe (of approved make) \"manually controled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. (Note : It should have flush rate of with Flush rate of 4/2 Litre per Flush or less ) (Dual flush 4/2L WC cistern with bottom inlet for compact back to wall Rimless toilet) Orissa pattern white vitreous china W.C. pan of size 580x440 mm with integral type foot rests. JAGUAR/CERA Make |
| 143 | Providing and fixing white vitreous china pedestal type water closet (European type W.C . .pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever requied:W.C. pan with lSI marked white solid plasticseat and lid. JAGUAR/CERA Mak |
| 144 | Providing and fixing wash basin with C.I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps JAGUAR / CERA/HINDWARE Make |
| 145 | P/F of mirrors of superior glass with plastic moulded frame(of approved quality) and of required size and shape. With 6mm thick hard board backing. Rectangular Shape 1500 x 450 mm |
| 146 | P/F Stainless steel 304 Grade Square Shaped Sink Vessel Sink (21 X 18 X 8) inches (Steel) of approved brand and manufacture Hindware/Jaguare/Imperio/ Kaff and any other approved brand as per Engineer Incharge |
| 147 | Providing and fixing soil waste & vent pipe (Prince or any other appoved brand as per Engineer In Charge PVC Pipe. 110mm dia (10 feet unit Length)Type -B |
| 148 | PVC Pipe. 75mm dia (10 feet unit Length) |
| 149 | PVC Bend 110mm dia |
| 150 | PVC Bend 75mm dia |
| 151 | PVC Tee 110mm dia |
| 152 | PVC Tee 75mm dia |
| 153 | PVC Collar 110mm dia |
| 154 | PVC Collar 75mm dia |
| 155 | PVC trap 110mm dia |
| 156 | PVC trap 75mm dia |
| 157 | PVC Socket 110mm dia |
| 158 | PVC Socket 75mm dia |
| 159 | PVC door junction 110mm dia |
| 160 | PVC door junction 75mm dia |
| 161 | Providing and fixing 3 layer Thermex Pipe PP-R (Poly propylene Random copolymer)pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.incld. all fitting Type C .PN-16 pipe , 25mm OD(SDR-7.4) |
| 162 | (ii) PN-16 pipe , 32mm OD(SDR-7.4) |
| 163 | P/F CP brass toilet paper holder including cost of wodden,PVC,play etc. |
| 164 | Providing and fixing Wall mount Liquid Soap Dispenser of approved brand |
| 165 | Providing and fixing accessories of standard and quality make of approved manufacturer including all necessary fixtures required.AL-Drops for room door |
| 166 | T- Bolt for doors |
| 167 | Handles for door |
| 168 | 15 mm C.P. brass tap with elbow operation lever of approved brand and manufacture |
| 169 | 15 mm C.P. brass 2 in 1 tap of approved quality conforming to IS standards |
| 170 | 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 171 | 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms |
| 172 | C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-incharge. |
| 173 | Providing and fixing Stainless steel SS-304 Grade L Shaped 90° Wall Mounted Grab barsNear EWC (European Water Closet) of approved brand for Disable-friendly Bathroom/Toilets as per standard and specification. |
| 174 | Providing and fixing Stainless steel SS-304 Grade Foldable Grab bar For Disable-friendly Bathroom/toilets Make: Jaquar/ Equivalent per standard and specification. |
| 175 | 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg. |
| 176 | High water pressure S.S geyser connection pipe (2 feet long)of approved quality and make, |
| 177 | 15 mm C.P. brass ABS Health FaucetJet Spray with Hose and Holder of approved quality conforming to IS standards(KOHLER/JAGUAR/CERA) |
| 178 | Supply installation testing and commissioning of Instant Geyser 15ltr Capacity of approved brand (Havells/Bajaj/Crompton or any othet approved brand as per engineer in charge including all fixtures , bolts all complete |
| 179 | Providing and Fixing Handles with lock system of main doors LAPO Premium Rose Mortise Door Lock Handle Set/ Mortise Lock with Brass Lock Body and 70mm Brass Cylinder Set with 3 Brass Computer Keys / Zinc Alloy Weather Proof (Matt Finish) or Godrej Locking Solutions and Systems Gloria Antique Brass Door Handle with Lock Set 2C for Home and Office Entrance Door (200 mm, Gold) or any other approved brand as per engineer incharge |
| 180 | providing and fxing PTMT towel Rail vcomplete with bracets fixed to wooden cleats with C.P brass screws with concealed fittings. Arrangement of approved quality and colour. 450mm long towel rail with toal length of 495mm ,78mm wide and eeffectie height of 88mm weighting ot less than 175gms. |
| 181 | Providing and installation ofPUF (Puf Insulated Tanks) water tank capacity 1000 ltrs of approved brand (SYNTEX OR ANY OTHER APPROVED BRAND) as per direction engineer incharge |
| 182 | Design Supply and installation/Fixing staircase railling ofstainless steel (Grade 304) railing(Top Handrail Dia> 50mm , two number intermediate Horizontal tubes Dia>25mm and Rectangular Two Pair Balusters Dia >38mm @1000mm C/C) made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) including fixing the railing with necessary accessories , newal post , balusters and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, necessary screws/fixtures complete jobas approved by engineer incharge (Note : No additional payment shall be made to master pillar/Newal Post ) |
| 183 | Design Supply and installation/Fixing stainless steel SS-304 Grade wall mounted handrail 40-45mm in diaincluding wall brackets at a spacing of 1.2m-1.5 with necessary accessoriesand stainless steel dash fasteners, stainless steel bolts etc. of required size, along staircase wall , corridors with suitable arrangement as per drawings and approval of Engineer-in-charge |
| 184 | Providing wood work in frames ofwalls,false ceiling, partitions etc. sawn and fixed in position :Budloo / Fir wood (Note : False Celling Design should be as perengineer in charge which may be of different level celling) |
| 185 | Providing and fixing 12 mm thick tongued and grooved Pine wood(Soft Wood ) 4-5 inch in width panelling or wall panels in walls and celingincludining all necessary fixtures including cornice with necessary screws, priming coat on exposed surface etc., complete. Brand - Rait Wood |
| 186 | Preparing newly prepared panneled surface for polishing by way of filling of putty , sealer andsand papering rubbing and applying hard polish,glossy polish in sequance over the prepared surface complete job |
| 187 | Providing and fixing thermal insulation with specified wool and density conforming to IS: 8183, 50 mm thick, wrapped in 200G Virgin Polythene bags fixed to walls with screws, rawl plugs and washers and held in position by criss-crossing GI wire etc. complete as per directions of Engineer-incharge. With resin bonded rock wool with density 48 kg/cum |
| 188 | Providing and fixing 20mm-25mm Thick Nitrile Butadiene rubber (NBR) Calss 0, highly flexible, closed cell insulation material with high water vapour diffusion resistance and low thermal conductivity to prevent condnsation , reduce ebergy losses placed in wooden framework of walls for better thermal insulation of walls. |
| 189 | Providing and laying roof insulation with 40 mm thick impervious sprayed, closed cell free Rigid Polyurethane foam over deck insulation conforming to IS - 12432 Pt. III (density of foam being 40-45 kg/cum), over a coat of polyurethane primer applied @ 6-8 sqm per liter, laying 400 G polythene sheet over PUF spray and providing a wearing course of 40 mm thick cement screed 1: 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) in chequered rough finish, in panels of 2.5m x 2.5 m and embedding with 24 G wire netting and sealing the joints with polymerized mastic, all complete as per direction of Engineer-in-Charge.. |
| 190 | Wooden planking, tongued and grooved in flooring including fixing with iron screws complete: |
| 191 | Supply and installation of High Quality self regulating heat tracerfor Specialized Heating Solutions for Winterisation of water pipeline including all accessoriescompleteincluding Supply and installation ofCircuit Control Panel with RCBO MCB ,THERMOSTAT (0-120) DEG C, power connector-two way-6 sq.mm, w.p. splice connector,w.p. tee connector,end seal,mounting kit-w.p. jb,g.i. pipe strap 4\",al. adhesive tape roll( 50 mm w x 20 m l),f.g. adhesive tape roll (DANFOSS Make OR CHROMALOXany other approved brand as per the direction of Engineer-In-Charge) |
| 192 | Supplying and fixing High Quality32mm ThickNitrile Insulation Tube for water pipelineof approved brand2 InchSize (Armaflex Class-o Armacell) including alumunium duct clading (Alumunium Sheet Guage Thickness = 0.46MM TO 0.71MM )of approved quality and finish as per the direction of engineer in charge |
| 193 | Suppy and installation of6 - 8 Inch Dia alumunium suctionDuct Pipe (Alumunium Sheet Guage Thickness = 0.46MM TO 0.71MM )For HVAC Ducting for kitchen baths including stainless steel Clamps and all necessary fixtures all complete |
| 194 | Supply and installation of Reflective Bubble Aluminum Foil Insulation / Aluminium Silver Bubble Sheet 210 GSM (7 mm) ThickLight Weight Reflective Insulation , Max Withstanding Temperature -40 degree To +110 Degree Waterproof insulation all complete |
| 195 | Supply and installation ofelectrical Underfloor heating mats for floor heating systemsnon-corrosive, flexible heating elements including cables, pre formed cable matsincluding smart thermostatand digital electrical control panel all complete (STIEBEL ELTRON / DANFOSSOr any other approved brand |
| 196 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound@ 0.253 kg/sqm.(b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm.(c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg./sqm. and coarse sand @1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around.(d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately) For the purpose of measurement the entire treated surface will be measured. |
| 197 | Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 198 | Providing of fabricated steel roofing truss, purlins, rafters, posts, plates ISA.65x65x6mm ,ISA.50x50x6mm, 40x40x6mm, ISMC 75mm ,65mm,50mm,Plates 8mm,10mm thick, including cutting hoisting fixing in position and applying a primingtwo ormore coat of approved steel priming/paintingall work complete job. including launching of trusses. all carraige complete. |
| 199 | Supply and installation of ABC Fire Extinguisher, 6 Kg 4Sets (Note : It should be Halon free) |
| 200 | Provision for providing and fixing ornamental Shingstak (Ladakhi wood carving over exterior Windows and main entrance door) (Design as per the direction of Engineer-In-charge.) including polishing all complete |
| 201 | Providing and fixing 19 mm thick plywood of appoved brand (Century Ply Or Greenply Industries Limited (GIL) Or any approved Brand ) and manufacture including fixing of decorative laminate sheet over 19mm ply using synthetic resin adhesive , nail,screws,hinges ,Handels , Ball Bearing Telescopic Channel (Godrej or any other approved brand) and carriage all complete. |
| 202 | Providing and fixing 6 mm thick plywood of appoved brand and manufacture including nail,screws and carriage all complete. |
| 203 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: as directed by Engineer-in-charge. all kind of soil. |
| 204 | odinary Rock @80% |
| 205 | Disposal of Mulba/Excavated Earth Beyond 50m (Lead upto 6Km) Outside Campus Area (CARRIAGE OF MATERIALS By Mechanical Transport including loading, unloading and stacking) |
| 206 | Providing and laying position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) (crushed) Mud Mate(Use Of Portland Pozzolana Cement Is advised as Per Green Building Guidelines OR 25% replacement of Ordinary Portland cement with fly ash by weight of cement used in structural concrete.) |
| 207 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 ( 1 cement : 6 course sand : 12 graded stone aggregate 20 mm nominal size)upto plinth level with cement mortar 1:6 ( 1 cement : 6 course sand)and curing complete (Quarry Stone) |
| 208 | Dry random rubble masonary with hard stone in foundation & plinth using quarry stone with bond stone |
| 209 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 210 | Providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position in cement mortar 1:3 (1cement:3 coarse sand), cost of required centring, shuttering and curing complete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20 mm nominalsize) |
| 211 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 212 | Centering and shuttering including strutting, propping etc. and removal of form for:FOUNDATION . |
| 213 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.50 mm thick with 20mm nominal size stone aggregate. |
| 214 | Supplying and fixing C.I. cover without frame for manholes560 mm diameter C.I. cover ( heavy duty) the weight of the cover to be not less than 108 kg |
| 215 | CEMENT PLASTER (IN COARSE SAND) 12mm Cement plaster of mix 1 : 4 ( 1 cement : 4 coarse sand) (PPC or cement with >25% flyash is recommended as per green building guildelines) |
| 216 | Carrige of sand /agg. For an average lead of 12Km by Mt. |
| 217 | Carrige of stone . For an average lead of 02 Km by Mt. |
| 218 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC Conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 219 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 220 | 4 X 6 sq. mm + 2 X 6 sq. mm earth wire(LIFT) |
| 221 | 4 X 10 sq. mm + 2 X 6 sq. mm earth wire(FOR DB INCOMING) |
| 222 | 4 X 16 sq. mm + 2 X 6 sq. mm earth wire |
| 223 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 1 or 2 Module (75 mmX75 mm) |
| 224 | 3 Module (100mmX75mm) |
| 225 | 4 Module (125mmX75mm) |
| 226 | 6 Module (200mmX75mm) |
| 227 | 8 Module (125 mmX125 mm) |
| 228 | 12 Module (200 mmX150 mm) |
| 229 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 A switch . Fancy and good quality |
| 230 | 3 pin 5/6 A socket outlet |
| 231 | 15/16 A switch |
| 232 | 6 pin 15/16 A socket outlet |
| 233 | Telephone socket |
| 234 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 235 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. |
| 236 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25mm |
| 237 | Cast Iron C.I. Junction Box, Size: 25 mm, 4 Way |
| 238 | FAN box |
| 239 | 8 way (4 + 24), Double door |
| 240 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 12 way (4 + 36), Double door |
| 241 | Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. |
| 242 | Supplying and fixing following rating, four pole, 415 V, MINIATURE CIRCUIT BREAKER(MCB) in the existingDB complete with connections, testing and commissioning etc. as required. 63 Amps |
| 243 | Supplying and fixing following rating, four pole, 415 V, Residual current circuit breaker (RCCB) having a sensivity current 30mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 Amps |
| 244 | Providing and fixing danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. |
| 245 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required. |
| 246 | Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. |
| 247 | Providing & Fixing of IP40 LED Recessed / Surface Mounted, Round / Sqaure Non-Dimmable Back lit SMD Mid Power LED Downlight with die-cast aluminum housing & Heat Sink for heat dissipation with UV Stabilized non yellowish Diffuser with internal/ external BIS complience 2.5 KV surge protected Isolated driver, with Short & Open circuit protection, having efficiency > 85% and in compliance to IEC standards. System Lumen efficacy of = 120 lm / watt, THD < 10 % ,p.f.=0.95, CRI >80,life time of minimum50000 Burning Hours with , 70% of intial Lumen maintaned till life ends, CCT 3000°K / 4000°K/ 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be ofBIS standard andtrade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing onhousing.OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) certificate / Report from OEM shall be submitted. 15W CEILING MOUNTED LED LIGHT |
| 248 | 12W CEILING MOUNTED LED LIGHT |
| 249 | 10W CEILING MOUNTED LED LIGHT |
| 250 | LED LINEAR PROFILE LIGHT |
| 251 | LED COVE LIGHT |
| 252 | 5 WATTS FOOT LIGHTS |
| 253 | 10W LED MIRROR LIGHTS |
| 254 | Installation, testing and commissioning of the following 1500 rpm exhaust fans including louvered shutters etc. complete as required. 300mm |
| 255 | Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. |
| 256 | Supplying and drawing of UTP 4 pair CAT 6Cable in the existing surface/ recessed Steel/ PVC conduit as required. 1 run of cable |
| 257 | Supply,Installation testing and Commissioning of Analog Based EPABX Main Unit equipped for 8 to 112 users expandable .Model:NEC, SL2100 |
| 258 | Digital Phone |
| 259 | Supply , Installation, Testing and Comissioning of Wall mounted Communication rack with glass doors, handles ,lock , Top and Bottom Cable entries, Supports for mounting rack on wall , Cable managers, one Fan, Equipment mounting hardware, power supply box for supplying power to switches, fans etc along with earth continuity kit, Mcb, indicator, moulded power supply cable 15 U RackwallMounted |
| 260 | Supply , Installation and Testing of 4 pair, 100 Ohm impedance, Cat 6/6Apatch cords should be constructed of minimum 23/24 AWG, stranded bare Copper cable with FRPVC/LSZH Jacket, with an enhanced performance by factory moulded RJ45 connectorsas per ANSI/TIA/EIA 568 suitable for Cat 6/6A application complying to latest ammendments Category 6/6A Standards, According. to TIA568, minimum requirement for 1G BASE-T/ 10G BASE-T performance. Patch cords shall be straight thru cable compatible with both T568-A and T568-B wiring schemes,Minimum 750 to 1000 mating cycles in plug contacts for long durability complete in all respect. Cat 6, UTP (Un-sheilded Twisted Pair) Patch Cord. 1 Mtr Grey Color CAT 6 |
| 261 | (ii) 2 Mtr |
| 262 | Supply, Installation, Testing and Comissioning of Rack mounted 19\" 1U, 24 Port Unloaded, 1.5-1.6 MM CRS chasis, powder coated, sheet steel, made of plastic (ABS), Modular Patch Panels (Cat-6A) with Rear Cable management system and mounting hardware to mount the patch panel. Should have port identification numbers printed/engraved on front of the panel, . There should be a provision for each port/jack on the paneland reusable removable on field from the panelcomplete in all respect. |
| 263 | SITC of Intelligent Ethernet POE Switches providing 24x 10/100/1000 Fast Ethernet POE ports- 370W or better and 4 dual purpose uplink (provision for Copper / Fiber Giga connectivity) with provision of minimum Stacking of 06 Switches with related LAN Base Software. |
| 264 | Supply, Installation, Testing and Comissioning of Rack mounted , 24 x 10/100/1000 Ethernet ports Gigabit Switch with 4 mini Gigabit Interface Converter slots(shared with 4 Ethernet ports) for Gigabit Ethernet expansion , Switching capacity 96 Gbps nonblocking. |
| 265 | SITC of Intelligent Ethernet POE Switches providing 16x 10/100/1000 Fast Ethernet POE ports- 370W or better and 4 dual purpose uplink (provision for Copper / Fiber Giga connectivity) with provision of minimum Stacking of 06 Switches with related LAN Base Software. |
| 266 | Supply, Installation, Testing and Comissioning of Rack mounted , 16 x 10/100/1000 Ethernet ports Gigabit Switch with 4 mini Gigabit Interface Converter slots(shared with 4 Ethernet ports) for Gigabit Ethernet expansion , Switching capacity 96 Gbps nonblocking. |
| 267 | Supply, Drawing and Testing of 4 pair, 23 AWG Solid Bare Copper wire insulated with PVC, UTP (Unshielded Twisted Pair), Category 6, Class E, 100 Ohm Impedance, Indoor Cable as per latest ammendments of ANSI/TIA/EIA-568 , The copper conductors should be balanced twisted in pairs, seperated by a cross-member fluted pair divider & protected byPVC Jacket. Certified performance in a 4-connector configuration upto 100 Mtrs channel requirements & transmission frequencies up to 250 Mhz. in existing MS/PVC Conduits/casing capping including making connections to Information outlets and Patch Panels with jack &ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing etc as required complete in all respect. |
| 268 | Supply and Installation of Cat 6, Un-sheilded/sheilded Information outlets made of high impact plastic body with ABS, FR Grade with provision for protection against dust in jack/ FP, suitable for Cat-6A application complying to latest ammendments, According. to Cat-6A channel, It should support channel as well as components requirements of Cat.6/6A standards at frequencies of up to 250 to 500 Mhz. Cat 6/6A(i)I/O Jack Cat-6 White |
| 269 | (ii). I/O Jack Cat-6 Green |
| 270 | Supply & fixing of square Faceplate for Flush / Surface Mount Information Outlets Dual or Quad Aperture ,material should bePC+ABS body, Suitable for RJ45 unshielded/shielded connection modules. Should match with I. O. Dimensions should be 86mm X 86mm as required complete in all respect. Supply, Installation, Testing and Comissioning of Cat-6 Face Plate Single Module |
| 271 | (ii) cat -6 face plate double. |
| 272 | Supply, Installation, Testing and Comissioning of 25 Pair Cat-5/Cat-6 Riser Cable for Communication |
| 273 | Supply, Installation, Testing & Commissioning of 5 MP IR Fixed Dome Network Camera -1/2.7? Progressive Scan CMOS, 2592 × 1944 at 25fps, 2.8 mm Fixed lens, 0.003Lux at F1.4, 0 Lux with IR on, ICR, ONVIF (PROFILE S, PROFILE G, PROFILE T), support H.265, H.264, MJPEG, 120db WDR, BLC, HLC, 3D Digital Noise Reduction, Three individually configurable stream, 12 VDC & PoE, IR range: 40m, Support on-board storage up to 256 GB (SD card not included), Alarm : 1 inputs & 1 outputs, Audio: 1 input & 1 output, Built-in Microphone, , IP67, IK 10, Edge Analytics- Line crossing detection, Intrusion detection, Motion detection, Scene change detection, Face capture, Region entrance detection, Region exiting detection, Video tampering, Audio exception detection, Focus on human and vehicle targets classification based on deep learningUL, CE, FCC certified. |
| 274 | 5 MP Varifocal Bullet Network Camera -1/2.7\"\" Progressive Scan CMOS, 2592 × 1944 at 25fps, 2.7 to 13.5 mm Varifocal Auto iris lens, 0.003 Lux at F1.4, 0 Lux with IR on, ICR, ONVIF (PROFILE S, PROFILE G, PROFILE T), support H.265, H.264, MJPEG, 120db WDR, BLC, HLC, 3D Digital Noise Reduction, Three individually configurable stream, 12 VDC & PoE, IR range: 60m, Support on-board storage up to 256 GB (SD card not included), Alarm : 2 inputs & 2 outputs, Audio: 1 input & 1 output, IP67, IK10, Edge Analytics- Line crossing detection, intrusion detection, Scene change detection, Motion detection, Face capture, audio exception detection, Video tampering, Region entrance detection, Region exiting detection, False alarm reduction through human and vehicle targetclassification, UL, FCC, CE certified. |
| 275 | 32ch Network Video Recorder- Connect Up to 32 IP Cameras, Up to 12 Megapixels Resolution, HDMI1/VGA1 and HDMI2/VGA2 outputs provided, Atleast one HDMI output of 4K resolution, atleast one VGA output with output upto 1920 × 1080, Support H.265, H.264, MJPEG, Supports N+1 hot spare system, Supports RAID0, RAID1, RAID5, RAID6 and RAID10, Supports HDD hot swap, Supports Dual Power-Redundant, Incoming Bandwidth 320 Mbps, 4 SATA Hard Disks, ANR Technology, 4 SATA interfaces for 4 HDDs and capacity of each HDD upto 10TB, RS-232; RS-485, Front panel: 2 × USB 2.0; Rear panel: 1 × USB 3.0, Alarm I/O 16/4, 2 RJ-45 10 /100/1000 Mbps self-adaptive Ethernet interface,Multiple network monitoring: Web viewer, CE, FCC, UL certified. |
| 276 | 6TB Surveillance Hard Disk |
| 277 | Display 31.5\" 1080P, HDMI/VGA input, view angle:178°/178°, 300cd/?, plastic casing, VESA, base bracket included, 7*24h |
| 278 | supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface /recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 279 | Supply, installation, testing & commissioning of cubicle type compartmentalized floor mounted free standing with separation system as per IS:8623 part 1 for 415V, 50HZ, 3phase 4 wire AC supply, moisture, dust and vermin proof IP-55, L.T.Panel boards, made out from 2mm thick CRCA sheetsteel duly epoxy powder coated (by seven tank process ) in approved colour, complete withinterconnections / control/ power wiring with FRLSH copper conductor wires & 6A SP MCBs for control circuits ,communicable meters shall be with software, high conductivity Aluminium bus bars, earth bus,Bus bar supports, removable 3mm thick gland plates on top & bottom, M.V. danger notice plate , louvers and following incomer and outgoing feeders (outgoings will be with ON indication with 6A control MCB) complete as per specifications(SLD) and drawings : |
| 280 | Design,Supply,Erection, Testing and commissioning of advanced Piezoelectric Ceramic Based Lightning Protection system suitable for protection of buildings against direct lightening strike complete with Early streamer Emission( with Piezoelectric exciter device for corona effect), chromium plated copper lightning conductor air terminal, event Counter with sensitivity 1 KA to 100 kA for 8/20 micro second impulse without additional power supply requirements and complete as required |
| 281 | Design,Supply,Erection, Testing and commissioning of total maintenance free earthing terminal including Safe Earthing Electrode of Length 3 meters- 80 mm diameter including excavation and back fill compound complete as required. |
| 282 | Supply, Installtion,Testing and commissioning of Flexible Insulated 50 square cm Copper flat Down conductor including cost of saddles etc complete as required. |
| 283 | Supply, Fabrication and installing following sizes of painted 2mm thick GI ladder/perforated type Cable trayincluding horizontal and vertical bends, reducers, tees, cross members and other accessories as required and duly suspended FRLSom the ceiling with MS suspenders and including painting etc. (Support of Cable Tray shall be included in the item).Perforated Type 1.6 MM THICK 300mm(W) x 40 mm (D) |
| 284 | Supply,Laying, Testing& commissioning of under ground cable one metre below ground level covered with sand and R.C.C covers ofsuitable size as per requirement for mechanical protection to the cable,including necessary connections, digging in all classes of soil and refilling with primary compaction of trenches for following sizes XLPE(E) 11KV insulatedISI marked and of approved make.Aluminiumconductor armoured cables suitable for working voltage upto 11000 volts including proper dressing of the cable in an approved manner complete as required and as per specifications. 3.5core, 70 Sq.mm. |
| 285 | (ii) 4.0 core, 25 Sq.mm. |
| 286 | supply,Laying,Testing & Commissioning P.V.C. / XLPE insulated & P.V.C. sheathed ArrmouredAluminiumcable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV withH4- Grade electrolyticaluminium conductor confirming to IS 8130 of purity >99.6 %, round / flat strip armouring of cables, Inner / outer sheath confirming to IS:5831in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray(with cable tie) includingtesting etc. as required of following size. OEM must have it\"s own in house NABL accrediated Laboratory for testing procedure as per IS:108109(i) . 3.5 core, 70 Sq.mm. |
| 287 | (ii) 4.0 core, 25 Sq.mm. |
| 288 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1kV grade as required.(i) 3.5 core, 70 Sq.mm. |
| 289 | (ii) 4.0 core, 25 Sq.mm. |
| 290 | Supply and laying of RCC Hume pipes (100MM Dia) for cable entry including the cost of excavation, back filling of excavated material, compaction and Concreteing and installation of cable marker as required |
| 291 | Supply, Installation, Testing and Comissioning of 5 KVA UPS INCLUDING BATTERY BACKUP OF 25 MINUTES WITH ALL ACCESSORIES INCLUDING INTERCONNECTION CABLES AND STAND. |
| 292 | Supply, Installation, Testing and Comissioning of 2 KVA UPS INCLUDING BATTERY BACKUP OF 25 MINUTES WITH ALL ACCESSORIES INCLUDING INTERCONNECTION CABLES AND STAND. |
| 293 | Supplying, installation, testing & commIssIoning of 6 zone, voice alarm controller with USB, MP3 player (including 6 zone button paging station) with seamless integration facility with main fire alarmpanel for voice evacuation complete as required. |
| 294 | Supplying, installation, testing & commissioning of digital audio amplifier 220 Watt, 25V rms operating at 240 Volt AC Supply complete as required. |
| 295 | Supply, installation, testing & commissioning of 15U equipment rack made out of CRCA sheet to house all the control equipment. Complete as required. |
| 296 | Supplying, installation, testing & commissioning of 1.5/3/6W metal box ceiling/wall speakers complete as required. |
| 297 | Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required.speaker cable Single pair, 2-core, 1.5 sqmm |
| 298 | Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events historylog in the non volatile memory (EPROM), power supply unit (230 ± 5 % V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP completeas per specifications. One Loop Panel |
| 299 | Supplying, installation, testing & commissioning of intelligent analogaddressable photothermal detector complete with mounting basecomplete as required. |
| 300 | Supplying, installation,testing & commissioning of intelligent addressablethermal detectorwith rate of risecum fixed temperature thermistor complete with base as required. |
| 301 | Supplying, installation, testing & commissioning of addressable manual call point complete as required. |
| 302 | Supplying, installation, testing & commissioning of fault isolator complete with base as required. |
| 303 | Supplying, installation, testing & commissioning of addressable strobe complete as required. |
| 304 | Supplying,installation,testing & commisssioning of intelligent addressable programmable sounder complete as required. |
| 305 | Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required. |
| 306 | Supply, installation, testing and commissioning of 43\" LED monitor includes Screen size :43\" Diagonal Size, LED BLU type technology, resolution- 3840 X 2160 ,250 nits brightness, 4700:1 contrast ratio, stereo mini jack, HDMI I/p-2 , USB-1, compatability for wifi, bluetooth suitable for operation on AC Power supply AC 240 V~ (+/- 10 %), 50/60 Hz,etc required.(SAMSUNG, Model – BE 43TH/SONY/LG) |
AI Tender Summary
Tender Timeline
Aug 28, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedSep 15, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 16, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender