Tender For Road Safety Works Of Crash Barrier, Thermoplastic Paint And Signage On Dhauntri Kamad-Ayanrkhal Budhakedar Chamiyala Motor Road, Jakhdhar Ghansali Motor Roads And Uttarkashi Lambgaon Ghansali Tilwara Motor Road In Block Bhilangana Under D
Tender Value
6 Crore
Estimated cost
Bid Submission
15 Sep 2023
0 days left
EMD
14.10 Lakhs
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
ghansali → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Road Safety Works Of Crash Barrier, Thermoplastic Paint And Signage On Dhauntri Kamad-Ayanrkhal Budhakedar Chamiyala Motor Road, Jakhdhar Ghansali Motor Roads And Uttarkashi Lambgaon Ghansali Tilwara Motor Road In Block Bhilangana Under Distt.Tehri
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 04-Sep-2023 | Date and Time extension letter | Date | 12-Sep-2023 |
| 2 | 12-Sep-2023 | Date and Time extension Ltr | Date | 15-Sep-2023 |
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation for retaining, breast walls etc, in all types of soils and rocks including all lead, lift and disposal of surplus material as per direction of engineer - in - charge, as per drawing and technical specifications Clause 305.1 of MORD Specifiction |
| 2 | Dhauntri-Kamad-Ayarkhal-Chamiyal M/R (S.H-73) |
| 3 | Jakhdhar-Ghansali M/R (S.H-74) |
| 4 | Uttarkashi-Lambgaon-Ghansali-Tilwara M/R Km 88-112 (S.H-15) |
| 5 | Uttarkashi-Lambgaon-Ghansali-Tilwara M/R Km 67-87 (S.H-15) |
| 6 | Providing concrete for plain/ reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 P.C.C grade M 15Nominal mix (1:2.5:5) |
| 7 | Dhauntri-Kamad-Ayarkhal-Chamiyal M/R (S.H-73) |
| 8 | Jakhdhar-Ghansali M/R (S.H-74) |
| 9 | Uttarkashi-Lambgaon-Ghansali-Tilwara M/R Km 88-112 (S.H-15) |
| 10 | Uttarkashi-Lambgaon-Ghansali-Tilwara M/R Km 67-87 (S.H-15) |
| 11 | Type - A, \"W\" : Metal Beam Crash BarrierProviding and erecting a \"W\" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810 ( if Concrete Required for Vertical post Fixing will be paid extra) |
| 12 | Dhauntri-Kamad-Ayarkhal-Chamiyal M/R (S.H-73) |
| 13 | Jakhdhar-Ghansali M/R (S.H-74) |
| 14 | Uttarkashi-Lambgaon-Ghansali-Tilwara M/R Km 88-112 (S.H-15) |
| 15 | Uttarkashi-Lambgaon-Ghansali-Tilwara M/R Km 67-87 (S.H-15) |
| 16 | Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 1.5 mm thick supported on RCC Post 100 mm x 100 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing Clause 1701.(600 mm equilateral triangle) |
| 17 | Dhauntri-Kamad-Ayarkhal-Chamiyal M/R (S.H-73) |
| 18 | Jakhdhar-Ghansali M/R (S.H-74) |
| 19 | Uttarkashi-Lambgaon-Ghansali-Tilwara M/R Km 88-112 (S.H-15) |
| 20 | Uttarkashi-Lambgaon-Ghansali-Tilwara M/R Km 67-87 (S.H-15) |
| 21 | Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 1.5 mm thick supported on RCC Post 100 mm x 100 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing Clause 1701.(600 mm x 600 mm square) |
| 22 | Dhauntri-Kamad-Ayarkhal-Chamiyal M/R (S.H-73) |
| 23 | Jakhdhar-Ghansali M/R (S.H-74) |
| 24 | Uttarkashi-Lambgaon-Ghansali-Tilwara M/R Km 88-112 (S.H-15) |
| 25 | Uttarkashi-Lambgaon-Ghansali-Tilwara M/R Km 67-87 (S.H-15) |
| 26 | Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 1.5 mm thick supported on RCC Post 100 mm x 100 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing Clause 1701.(600 mm circular) |
| 27 | Dhauntri-Kamad-Ayarkhal-Chamiyal M/R (S.H-73) |
| 28 | Jakhdhar-Ghansali M/R (S.H-74) |
| 29 | Uttarkashi-Lambgaon-Ghansali-Tilwara M/R Km 88-112 (S.H-15) |
| 30 | Uttarkashi-Lambgaon-Ghansali-Tilwara M/R Km 67-87 (S.H-15) |
| 31 | Providing and fixing of Standard Metal Delineator consisting of minimum retro reflective unit exposed area of 330 sqcm, full cube corner micro prismatic non metallic retro reflective sheeting on each side conforming with IRC 67 and meetingthe coefficient of retro reflection values as per ASTM D 4956 Type XI table specification with pure polyester powder coating with the minimum thickness of powder coating of not less than 40 micron. The posts shall have ellipsoidal or circular design with the height of the pole shall be 800 to 900 mm above the ground with about 200 to 300 anchored with PCC M-15 onto the ground. The front and back faces of the delineator should be curved with a radius of not more than 200 mm and with delta angle (or central angle of curve) lying between 20o and 30 o, to increase the visibility of the delineator for vehicles moving in continuous curves. The delineator shall have sufficient arrangement to make the reflective sheets vandal proof. Including all test report and warranties as per IRC 67 and IRC 79. |
| 32 | Dhauntri-Kamad-Ayarkhal-Chamiyal M/R (S.H-73) |
| 33 | Jakhdhar-Ghansali M/R (S.H-74) |
| 34 | Uttarkashi-Lambgaon-Ghansali-Tilwara M/R Km 88-112 (S.H-15) |
| 35 | Uttarkashi-Lambgaon-Ghansali-Tilwara M/R Km 67-87 (S.H-15) |
| 36 | Road Studs / Cat Eye:Providing and fixing of single mould twin shank reflective road studs of ‘category A’ Raised pavement markers made out of poly carbonate/ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face with retro reflectance and chromaticity values shall be as given in the detailed specifications and the product shall conform to ASTM D4280. The raised pavement marker shall also meet all the testing conditions of ASTM D4280 and fixed to the road surface using the adhesive recommended by the manufacturer. Two cylindrical Polymer Shanks of not less than 20 mm diameter and not less than 30 mm length shall be molded in the RPM body. The reflective raised pavement markers shall also confirm to the MORTH circular No RW / NH. 33023/10/ 97-DO.III and the length ,height and width of the body shall notbe less than 100 mm, 15 mm and 90 mm and base of marker shall be flat within 1.3 mm and outermost faces of configuration of marker shall not deviate more than 1.3 mm from a flat surface. The marker shall support a load of 13635 Kg tested in accordance with ASTM D4280. The marker shall withstand flexural strength of 909 kgf force in accordance with ASTM D4280. Marker lenses shall be moulded of Polycarbonate or methyl methecrylate conforming to ASTM D788. The area of each retro reflectory surface shall not be less than 13.0 sq.cm. The slope or retro – reflectory surface shall be 35 + 5 degree to base. Each reflector shall have a CIL not less than values specified in table 1 of MORTH Section 800 page no. 353 and should accompany two year warranty for satisfactory field performance from the |
| 37 | Dhauntri-Kamad-Ayarkhal-Chamiyal M/R (S.H-73) |
| 38 | Jakhdhar-Ghansali M/R (S.H-74) |
| 39 | Uttarkashi-Lambgaon-Ghansali-Tilwara M/R Km 88-112 (S.H-15) |
| 40 | Uttarkashi-Lambgaon-Ghansali-Tilwara M/R Km 67-87 (S.H-15) |
| 41 | Cement plum Masonry with 40% plum & 60% 1:3:6 cement concrete including supply of all material, labour, T&P etc. required for proper completion of the work. As per drawings and technical specifications Clause 802, 803, 1202 & 1203 of MORD Specifiction |
| 42 | Dhauntri-Kamad-Ayarkhal-Chamiyal M/R (S.H-73) |
| 43 | Providing and laying of hot applied thermoplastic compound of ISI Mark Approved Quality of 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. |
| 44 | Dhauntri-Kamad-Ayarkhal-Chamiyal M/R (S.H-73) |
| 45 | Jakhdhar-Ghansali M/R (S.H-74) |
| 46 | White washing two coats on parapet walls and tree trunks including preparation of surface bycleaning scraping etc. as per technical specifications Clause 1915 |
| 47 | Dhauntri-Kamad-Ayarkhal-Chamiyal M/R (S.H-73) |
AI Tender Summary
Tender Timeline
Sep 12, 2023
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 12, 2023
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Sep 15, 2023
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedSep 15, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 15, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender