Tender For Dry -Docking Repair Works Of Wb Chembakam At Yard In Kochi During The Year 2023-24
Tender Value
16.37 Lakhs
Estimated cost
Bid Submission
11 Sep 2023
0 days left
EMD
32745
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kochi → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Dry -Docking Repair Works Of Wb Chembakam At Yard In Kochi During The Year 2023-24
BOQ
| Sl. No. | Item Description |
| 1 | Charges for Docking / un - docking or beaching / un -beaching of the vessel |
| 2 | Dock hire chares (No extra dock hire charges will be entertained) |
| 3 | Mooring Charges for before and after dry-dock as well asduring afloat repair works |
| 4 | Charges for ultrasonic testing of underwater hull and above water plates, onboard deck etc with Authorized agency. The copy of UT Gauge report shall be submitted to the office after completion of UT testing for the vessel immediately. |
| 5 | Dismantling of propellers Port & STBD sides (Make: Madras Marine industries, Dia:700 mm, Pitch:630 mm, P/D:0.9, No of blades:04, Type: Fixed pitch, no: 02), propeller shafts, checking the trueness of the shaft (Make: Madras Marine Industries, Dia:72 mm, Material: Stain less steel, no: 02), propellers, re-metalling, renewal of cut lash bushes etc. and re-fitting of the same along with propellers after balancing properly including labour charges. |
| 6 | Cost of Spare parts will be reimbursed on(Actual+10%) basis |
| 7 | Dismantling of rudder (Type:Plate type, Make: Startek shipyard Pvt Ltd,Chennai, Shaft: Dia.70 mm) and rudder stock, inspection of trueness, re-building of the same, making of new bushes, brackets etc. if any and re-fitting of the unit properly including labour charges. |
| 8 | Cost of Spare parts will be reimbursed on(Actual+10%) basis |
| 9 | Overhauling of both side sea suctionin engine room,and cleaning of mud box including labour cost. |
| 10 | Cost of Spare parts will be reimbursed on(Actual+10%) basis |
| 11 | Renewal of under and above water level hull and onboard deck steel plates of 5 / 6 mm thick of ship building quality after cropping and removal of the damaged plates by gas cuttingwithout any damages to other fittings such as electrical cables, pipelines,(the cables should be protected during cutting and welding) other equpments etc & also section under water portion pipe to assed (to be done after getting ultrasonic testreport and recommendation of Surveyor, Port Dept, Govt of Kerala including labour and material Cost. |
| 12 | Chipping, scrapping, wire brushing, buffing, shot blasting etc of external hull plate from keel to water level of the vessel properly (initially clean with fresh water with jet). Painting of the area with 1 coat of marine epoxy, 1 coat of chlorinated rubber antifouling paint including labour and material Cost. |
| 13 | Surface preparation of entire deck (from water level to deck surface) and super structure including out fittings by chipping, scrapping, wire brushing, buffing, shot blasting etc properly such as onboard deck, anchor winch, anchor cables (after dismantling), air vent pipes, hand pumps, bollards, wheel house, top of galley, railings, hatches, wheel house doors, stern gear compartment inside (rear side of vessel) & other fittings etc including labour and material Cost |
| 14 | Painting of entire deck (from water level to deck surface) and super structure including out fittings such as onboard deck, anchor winch, air vent pipes, hand pumps, bollards, wheel house, top of galley, railings, hatches, wheel house doors, engine room inside (total sides, top & ladder etc), stern gear compartment inside (rear side of vessel)& other fittings etcwith one coat of epoxy primer and 2 coats of epoxy marine quality enamel of existing colour properly. The exhaust pipe cladding shall be renewed with new one properly (both engines) including labour and material Cost. |
| 15 | Servicing of both side main engine oil cooler including labour charges |
| 16 | Cost of Spare parts will be reimbursed on(Actual+10%) basis |
| 17 | Overhauling of 12 intermidiate bilge valvesin engine room, and 3 no fire valves includinglabour cost |
| 18 | Cost of Spare parts will be reimbursed on(Actual+10%) basis |
| 19 | Cleaning of Bilge pipelines fitted in engine room including labour and material cost |
| 20 | Renewal of damaged port side main engineradiator cooler cover including labour cost. |
| 21 | Cost of Spare parts will be reimbursed on(Actual+10%) basis |
| 22 | Renewal of Port and Stbd side main engine Manifold intermediate hose changing including labour cost. |
| 23 | Cost of Spare parts will be reimbursed on(Actual+10%) basis |
| 24 | Servicing of Port and Stbd side blower (not working properly) including labour. |
| 25 | Cost of Spare parts will be reimbursed on(Actual+10%) basis |
| 26 | Renewal of oil drain nut fitted to oil sump fitted to Port and Stbd side main engine and cleaning of oil tank including labour charges |
| 27 | Cost of Spare parts will be reimbursed on(Actual+10%) basis |
| 28 | Repair of auxilary generator engine silencer leakage by dismantling of exhaust pipe claddings and renewal of dmaged pipes with new ones and Generator exhaust wooling shall bereplaced with new ferro wool in good condition including labour and material cost. |
| 29 | Provision for dismantling and fitting of Plywood lamination with wooling andFlooring fitted inside accomodation while renewal of deck ,wheel housesteel plates by refitting of the same / renewal of damaged plywood laminations and wooden frames by removing of damaged ones by fitting new ones of same size (for flooring vinyle sheets are to be renewed if damaged ) including labour and material charges. |
| 30 | Renewal of plywood lamination for both side wheel house entrance doors lower portion & damaged portions in wheel house side walls and near wind lass properly including labour and material Cost. |
| 31 | Renewal of damaged electrical panel box and re installations of the switches ,cables etc and ensure good condition of the system including labour Cost. |
| 32 | Cost of Spare parts will be reimbursed on(Actual+10%) basis |
| 33 | Renewal of damaged hand rails with new pipe of same size and strengthening of damaged hand rail base portion by cutting and welding including labour and material charges |
| 34 | Renewal of Heavy duty wiper (Port & STBD) blades with new ones including labour and material Cost. |
| 35 | Renewal and fitting of damaged fuel pump with new one for the Auxillary generator engine Make: Simpsons & Co Ltd ,Chennai, Model:S217, Power:12.5 KVA/10 KW diesel generator set,Type:4SC SA IN LINE |
| 36 | Cost of Spare parts will be reimbursed on(Actual+10%) basis |
| 37 | Renewal of RPMcables of both main engines inside engine room including labour and mayerial charges |
| 38 | Fitting of Zinc Anodes (Location: Hull side shell): Zinc anodes,Type:ZHW-043, Net wt.:3.9 kg, Gross wt.:4.3 kg,Dim: 220X115X30, Qty:12, properly including labour and material Cost. |
| 39 | Fitting of zinc Anodes (Location: Rudder, Kort nozzle & sea chest) Zinc anodes,Type:ZHW-055, Net wt.:5.0 kg, Gross wt.:5.5 kg,Dim: 300x90x40, Qty:10 properly including labour and material Cost. |
| 40 | Renewal of 2 no Fire box and portable almaira in kitchen room including labour and material cost. |
| 41 | Cleaning of diesel tanks (each 2000 lt capacity)after removing of diesel from the tanks. Removing & storing of HSD in barrels to be done with safe. Labour & material Charges |
| 42 | Renewal of damaged pipe line of hand pump of 2mtr |
| 43 | Renewal of rubber beeding of 2 no entrance doors and 2 nos windows with new one incl labour and material charges |
| 44 | Re writing of vessel name, logo (IWAI), registration no, Port of registry, GRT on 4 locations of the vessel with size: 200 mm x 200 mm, load line, draft marking etcand on LSA & FFA vessel name, reg no, port of registry to be marked clear visibility including labour and material Cost. |
AI Tender Summary
Tender Timeline
Aug 26, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedSep 11, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 12, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender