Vehicle Factory has published Tender For Repair And Re-Carpeting Of Bituminous Road Inside Factory At Vfj.. Submission Date for this Tender is 09-09-2023. Road Work Tenders in jabalpur Madhya Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | M&Lfor Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in soft / loose soil.all as specified and directed (Clearing away all grass vegetation, saplings, shrubs, brushwood, undergrowth, roots, and trees not exceeding 30 cm girth (measured one metre aboveground level) and removing rubbish upto a distance of 50 metres outside the periphery of the area under clearance except in the case of surface dressing which includes for all the foregoing except clearing away of trees). complete all a specified and as directed by the Engineer-in-Charge |
| 2 | M&L for Preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with mechanical air compressorto remove all loose dirt etc. complete all a specified and as directed by the Engineer-in-Charge. |
| 3 | M & L for Repair of potholes with paving bitumen any depth, not exc 1sqm each including swweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to atleast 25mm in depth, making good by applying tack coat @ 5 kg per 10 sqm, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sqm, blinded with 0.09 cum of stone chippings, 6.3mm size and again well rammed (including supply of premixed macadam, binder and chippings) depth of potholes exc 30mm rolled and compacted complete all a specified and as directed by the Engineer-in-Charge |
| 4 | M&L for Premix bituminous,macadam laid / rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) using binder content paving 80 / 100 any pentration using computterized hot mix plant and mechanical paver machine compacted to require as vibratory power roller all as as directed by the Engineer-in-Charge. |
| 5 | M&L for Applying evenly a priming / tack coat with bituminous primer at 5 kg per 10 sq metre using paving bitumen, complete all a specified and as directed by the Engineer-in-Charge. |
| 6 | M&L for Bituminous premix asphaltic denseconcrete 25 mm consolidated thicknesswith 5.5% binder content as in semi dense asphaltic concrete, using binder content paving bitumen 80 / 100 any penetration rolled and compacted to required camber and gradient using paving bitumen any pentration using computerised hot mixed plant and mechanical paver machine compacted to require as vibratory power roller all as as directed by the Engineer-in-Charge |
| 7 | M & L for Premixed Send /stone chip seal coat with 0.06 cum. of sand mixed with 6.8 kg of bitumen, applied and rolled with vibratory power roller all as specified to a uniform smooth surface using binder content paving bitumen any penetration. |
| 8 | M & L for preparation of bitumenous surface and apply one coat of thermoplastic paint of approved colour and of width n exc 10cm complete all as specified and directed by the Engineer-in-Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
