Tender For Rate Contract For Repair And Maintenance Works On Various Roads Under Pwd Sub Dn. Ii Sagwara Section Saroda
Tender Value
30.74 Lakhs
Estimated cost
Bid Submission
26 Aug 2023
0 days left
EMD
61480
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
sagwara → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Rate Contract For Repair And Maintenance Works On Various Roads Under Pwd Sub Dn. Ii Sagwara Section Saroda
BOQ
| Sl. No. | Item Description |
| 1 | Clearing and grubbing road land including uprooting rank vegetation, grass, brush, shrubs, saplings and trees of girth upto 300mm, removal of stumps, disposal of unserviceable Material and stacking of serviceable Material upto 1000m from road boundary. (MoRTH Specification : Clause 201). BY MECHANICAL MEANS In area of Light Jungle |
| 2 | Restoration of rain cuts with soil, moorum, gravel or a mixture of these, clearing the loose soil, benching for 300mm width, laying fresh Material in layers not exceeding 250mm and compacting with plate compactor or power rammers to restore the original alignment, levels and slopes. (MoRTH specification : Clause 3002) |
| 3 | Making up loss of Material/irregularities on shoulder to the design level by adding fresh approved soil and compacting it with appropriate equipment. (Maintenance of Earthen shoulder with filling fresh soil) with average depth of 150mm. (MoRTH specification : Clause 3003) |
| 4 | Filling pot-holes and patch repairs with open-graded premix surfacing, 20mm thick compacted with bitumen binder VG10 @14.60 kg/10 sqm and aggregate in Hot Mix Plant, transporting the mixed Material with tipper and laying manually to the required level and grade, rolling with power roller, 8-10 tonne, removal of all failed Material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot-holes with hot bituminous Material as per Clause 511, compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2 including cost of tack coat and excluding cost of seal coat with lead for mix of Material 1 km. (MoRTH specification : Clause 3004.2) |
| 5 | Filling of pot hole and patch repairs with surface dressing consisting of a layer of bitumen binder as per table 500.2 laid on the prepared surface followed by a cover of crushed stone chipping of specified size and rolling with power roller 8-10 tonne including removal of all failed Material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, and as per clause 3004.2 including cost of Material, fuel T&P etc. complete. (MoRTH specification : Clause 503 & 3004.2) Second coat with 0.10 cum crushed stone chipping 13mm nominal size and bitumen VG10 grade @ 10 kg per 10 sqm |
| 6 | Filling pot holes and patch repair with Wet Mix Macadam specifications including premixing the Material with water to OMC in mechanical mixer (Pug mill) as per design mix, carriage of mixed Material by tipper to site laying in uniform layers, with motor grader/F.E. loader/Paver Finisher, in sub-base/base course on a well prepared under-base and compacting with Vibratory Roller to achieve the desired density including lighting, guarding, barricading and maintenance of Driversion etc. (MoRTH specification : Clause 406). with all lead & lift |
| 7 | Providing and applying Premixed Seal Coat type “B” comprising of thin application of fine aggregate (0.06 cum per 10 sqm) premix with (6.8 kg per 10 sqm) bitumen binder (including cost of anti-stripping compound, wherever required) in mini hot mix plant 6-10 TPH, and laying with paver finisher and rolling with power roller 8-10 tonne, including all lead of mix Material (MoRTHspecification : clause 511). Bitumen VG10 grade |
| 8 | Supply of flood gauge (water gauge) as per IRC 67 standard 200cm long fixed on angle iron posts 50×50×6mm 2.6m long |
| 9 | Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. |
| 10 | Painting Lines, Dashes, Arrows etc on Roads in Two Coats on Old WorkPainting lines, dashes, arrows etc on roads in two coats on old work with ready mixed road marking paint conforming to IS: 164 on bituminous surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control Over 10 cm in width |
| 11 | Supplying, filling and stitching of empty cement bags either of plastic or jute with earth available at site, of weight not less than 40 kg including excavation etc. complete |
| 12 | White washing of parapets kerbs railings trees boundary stone guard stones guide stones and tree guards etc. complete. New surface three coats |
| 13 | Retro-Reflectorised Traffic Signs Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing 80 cm x 60 cm rectangular |
| 14 | Providing, laying and spreading of granular sub-base by providing coarse graded Material, spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per MoRTH Specification : clause No. 401. Grading-III |
AI Tender Summary
Tender Timeline
Aug 25, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedAug 26, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 28, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender