Tender For Laying Of Paver Block And Other Miscellaneous Work At Jarba Primary Health Centre, Panchayat- Jarba, Block- Churchu, District- Hazaribag
Tender Value
28.89 Lakhs
Estimated cost
Bid Submission
02 Sep 2023
0 days left
EMD
58000
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
churchu → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Laying Of Paver Block And Other Miscellaneous Work At Jarba Primary Health Centre, Panchayat- Jarba, Block- Churchu, District- Hazaribag
BOQ
| Sl. No. | Item Description |
| 1 | E/W in excavation in foundation trenches in ordinary soil (vide classification of soil item -A) and disposal of excavated earth to a distance up to50M, including all lifts with levelling ramming the foundation trenches removing roots of tree shurbsall complete job as per approved design & building specification and direction of E/I. (5.1.1) BCD |
| 2 | Extra for earth work in hard soil (vide classification of soil item-B) as per specification and direction of E/I.(5.1.2) BCD |
| 3 | Providing clean coarse sand filling in foundation trenches and plinthincluding ramming and watering in layers not exceeding 150mm thick with all leads & lifts including the cost of materials, labour, royality & taxes all complete job as per building specification and direction of E/I.( mode of measurement compacted volume) (5.1.10) BCD |
| 4 | Providing and Laying 80 mm thick Factory made chamfered edgeCement Concrete Interlocking Paver block of of M-30 grade made by table vibratory method using PU mould, laid in required colour and pattern over and including 50 mm thickcompacted bed of course sand, compacting and propper enbedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using vibrator, filling the joints with sand and cutting of paver blocks as per required size and patern,finishing and sweeping extra sand.complete all as per direction of E/I(.DSR 16.91.2) |
| 5 | Providing designation 75A one brick flat soling joints filled with local sandincluding cost of watering taxes royalityall complete job as per building specification and direction of E/I. (5.6.1. BCD) |
| 6 | Providing designation 75B one brick flat soling joints filled with local sand including cost of watering,taxes and royalty all complete as per building specification and direction of E/I (BCD -5.6.3) |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) (5.3.1.2) BCD |
| 8 | Providing and laying in position cement concrete of specified grade excludingthe cost ofcentering and shuttering - All work up to plinth leve :1:3:6 (1 cement : 4 coarse sand (zone -III ) : 6 graded stone agrregate 40 mm nominal size)(SOR BCD 5.3.1.5 ) |
| 9 | Providing designation 75 A brick work in C.M. ( 1:6 ) in foundation and plinth with approved quality of clean coarse sand ofF.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15 mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I. (SOR BCD 5.2.3 ) |
| 10 | Providing and laying in position cement concrete of specified Grade excluding the cost of centering and shuttering-All work upto plinth level: .1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 40 mm nominal size( BCD 5.3.1.3) |
| 11 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size)( BCD-5.3.10) |
| 12 | Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns etc. for mass concrete.(BCD 5.3.17.1) |
| 13 | Providing designation 75B brickwork in cement mortar (1:6) in Foundation and plinth with approved quality of clean coarse sand of F.M 2 to 2.5 including providing10 mm thick motar joints,cost of screening materials, raking out joints to 15 mm depth, curing taxes and royalty all complete as per building Specification & directionof E/I(BCD 5.2.6) |
| 14 | Providing 12 mm thick cement plaster (1:4) with clean coarse sand of F.M. 1.5 with 1.5 mm cement punning including screening, curing with all leads and lifts of water, scaffolding, taxes androyalty all complete as per specification and direcition of E/l.( BCD 5.7.2) |
| 15 | Providing 1.5mm cement punning including curing, carriage of water with all leads and lifts as per building specification and direction of E/I. ( BCD 5.7.11 ) |
| 16 | Coarse sand at Quarry (Equivalent to Koliwar sand)( SOR WRD, Page No. 33, Sl. No. 1) |
| 17 | Aggregate 63 mm to 45 mmatQuarry ( SOR WRD, Sl No. 8, Page No. 33) |
| 18 | Aggregate 13.2 mm to 5.6 mm atQuarry ( SOR WRD, Sl No. 11, Page No. 33 ) |
| 19 | Reinforced cement concrete work in beam, suspended floors, roofs, having slop up to 15\" landings, balconies, chajjas,lintels, bands. Plain window sills, staircase and spiral stair cases above plinth level up to floor five level,excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1cement:1.5 coarse sand (zone -III): 3 graded stone aggregate 20mm nominal size.) (BCD 5.3.11) |
| 20 | Providing Tor steel Reinforcement of 8mm. dia rods as per approved design and drawingwith cutting,bending and bindingwithannealed wire with cost of wire removal of rust, placing the rods in position ( excluding carriage of bars to work site). all complete as per building specification & of E/I. only valid for TMT FE 500 Tata(Tiscon).SAIL,JSPL,Electrosteel, steels ltd Bokaro and Vizag (RINL) 8 mm dia(BCD 5.5.4) |
| 21 | Providing Tor steel Reinforcement of 10mm. dia rods as per approved design and drawingwith cutting,bending and bindingwithannealed wire with cost of wire removal of rust, placing the rods in position ( excluding carriage of bars to work site). all complete as per building specification & of E/I. only valid for TMT FE 500 Tata(Tiscon).SAIL,JSPL,Electrosteel, steels ltd Bokaro and Vizag (RINL) 10 mm dia(BCD 5.5.5) |
| 22 | Carriage of materials Cement |
| 23 | sand :- |
| 24 | chips :- |
| 25 | Ston metal |
| 26 | Bricks:- |
| 27 | Hume pipe :- |
| 28 | Steel:- |
| 29 | Filling in foundation trenches or Back filling of masonary structure with suitableearth inlayers not exceeding 150 mm thick well waterd, rammed, fully compacted and finally dressed with earth obtained from excavation of foundation trenches and kept at a lead of 30M and initial lift of 1.5Mcomplete as per specification and direction of E/I. (SOR WRD Part B, Page 120,Sl. No. 6.1.16) |
| 30 | DT:Basic rates for 125/115 mm dia Drilled Tube well for drilling in all kinds of soils and rock for installation of hand pump with DTH rig Machine all complete including supplying all amterials,labours. tools, drillings,rigs,air compressor and equipments as well as fuel lubricant, for making 125/115 mm dia. boaringetc. cost of transporting rig machine and other vehicle up to site of workas per specification and direction of Engineer Incharge . (Basic rates) (SOR DW&SD, Sl No. 121 M1037, ) Added 10% CPFrom 0 M TO 30 M Pg. No. - 58 |
| 31 | DT:Basic rates for 125/115 mm dia Drilled Tube well for drilling in all kinds of soils and rock for installation of hand pump with DTH rig Machine all complete including supplying all amterials,labours. tools, drillings,rigs,air compressor and equipments as well as fuel lubricant, for making 125/115 mm dia. boaringetc. cost of transporting rig machine and other vehicle up to site of workas per specification and direction of Engineer Incharge . (Basic rates) (SOR DW&SD, Sl No. 121 M1037, ) Added 10% CPFrom 31 M TO 60 M Pg. No. - 58 |
| 32 | Supplying all materials, labours, equipments for lowering 125 mm dia blue UPVC casing pipe as casing for protecting the sides from failling during the process of drillingall complete including carriage of materials to work site (Basic Rate) (SOR DW&SD, Sl. No. 125, M 1041) Added 10% CP |
| 33 | Basic rate of UPVC pipe 125mm dia conforming to I.S.I. latest revision IS 12818/2016 CML No. 5543459 (SOR DW&SD, Sl No. 108, M 1024 )(Added10 % C.P.) |
| 34 | UPVC pipe ( working pressure 4 kg/cm2 ) single socketed pipe 110 mm dia (SOR WRD, Sl. No. 307, M-1266 , Pg No. 72 ). (Added C.P. 10%) |
| 35 | UPVC coupler for UPVC drainage pipes 110 mm (SOR WRD, Sl. No. 311,M-1270 , Pg No. 72 ). (Added C.P. 10%) |
| 36 | UPVC single equal Tee (without door) 110 X 110 X 110 mm (SOR WRD, Sl. No. 315,M-1274, , Pg No. 72 ). (Added C.P. 10%) |
| 37 | UPVC Bend 87.5° 110 mm bend (SOR WRD, Sl. No. 319 , M-1278, Pg No. 72 ).(Added C.P. 10%) |
| 38 | UPVC Pipe clip 110 mm bend (SOR WRD, Sl. No. 323,M-1282, Pg No. 72 ). (Added C.P. 10%) |
| 39 | U-PVC pipes (working pressure 4 kg/cm2 ) Rubber (Seal) Ring 110 mm (SOR WRD, Sl. No. 309, Pg No. 72 ). (Added C.P. 10%) |
| 40 | Stainless Screws 50 mm (SOR WRD, Sl. No. 383 , Pg No. 75 ).(Added C.P. 10%) |
| 41 | Solvent cement (SOR DW&SD, Sl. No. 42, M-958 ) (Added C.P. 10%) |
| 42 | Supplying labours and tools for laying and jointing UPVC pipe in trenchesand making joints with U.P.V.C. collar and solvent cement, including providing night guard, barrier & red light to safe guard against accident, all complete as per specification and direction of E/I ( UPVC pipe with collar and cement to be supplied departmentally free of cost ) ( SOR DW&SD, Sl. No. 3.1.36(b) 110/100 mm dia. |
| 43 | NP2 RCC Hume pipe with collar (250 mm dia) as per I.S.S 458-1971 (iv) 250 mm (SOR WRD Sl. No. 13 (M300), Pg. No. 84) (Added C.P. 10%) |
| 44 | Labour for laying, fitting and fixing NP2 hume pipe withcollars in line, level and grade, as well as providing approved jointing materials and joints prpperly filled to make them water proof all complete, as per specification and direction of E/I. (SOR WRD, Sl. No. 7.6.1.2, Page No. 149) |
| 45 | Supplying materials and labours for constructing inspection chamberof designation class 75B bricks size 750mm deep,600mm x 450mm internal dimension having 250 mm wall thickness in cement maortar (1:6)including 12mm cement plaster (1:4) with punning on inside and cement plaster (1:6) with 600x475mm G.I cover with frame ( weight not less than 36 kg) along with earth work in excavation and 80mm thick P.C.C (1:3:6) in foundation and refillingall complete as per specification and direction of E/I(SOR DW&SD, Sl no. 3.3.8 page no. 130) |
| 46 | Supplying, fitting and fixing 20 gauge G.C.I. sheet gate fitted on. M.S. angle frame of size 60 x 60 x 6mm including cost of fabrication providing necessary locking arrangement with haskal end dommy duly fixed in P.C.C. (1:2:4) block of required size, applying a priming red lead paint over steel work taxes all complete as per drawing specification and direction of E/I.B.C.D. S.O.R. Item No. 5.5.29 |
| 47 | Supplying G.I. pipes (TATA Mark) or equivalent as per IS-1239 (Part-01)/2004 ISI Marked / Medium Quality - 65mm (WITH C.P) M -930 [K] (vi) 65mm dia |
| 48 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheet complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275 gm/m² DSR-12.1.3 |
| 49 | Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all completeas per buildingspecification and direction of E/I.(BCD 5.8.45) |
| 50 | Providing Welder Grade-I for fixing the G.I. pipe and placing in position all complete job.(BCD pg 48, sl -41) |
| 51 | Add 18% GST |
| 52 | Labour Cess 1% |
AI Tender Summary
Tender Timeline
Aug 25, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedSep 02, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 06, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender