|
| 1 | Dental Materials |
| 2 | Abrasive acrylic trimmer-metallic- (Tungsten carbide, tapered with round tip, criss- cross blade, medium size) |
| 3 | Gates gliddenAssorted#1-6- Pack of 6, 32 mm |
| 4 | Gates glidden #2- Pack of 6, 32 mm |
| 5 | Peso Reamers Assorted # 1-6- Pack of 6, 32 mm |
| 6 | Peso Reamers# 2- Pack of 6, 32 mm |
| 7 | Acrylic cold cure DPI- powder- pink 3 KG jar |
| 8 | Acrylic cold cure- Monomer- 4 Litre Can |
| 9 | Acrylic heat cure powder (Polymer)- light pink |
| 10 | Base plate-shellac (Thermoplastic, Packet of 12) |
| 11 | Non Eugenol Temporary cement- (Provicol) |
| 12 | Crown cutting bur- Tungsten carbide bur (Monobloc TC cutter, tri-hawk) |
| 13 | Dental plaster - White fine powder(25kg bag) |
| 14 | Gloves-latex examination disposable-Medium 7 size (Box of 100) |
| 15 | Gloves-latex examination disposable-Small – 6 ½ size |
| 16 | Dental stone- Type III in airtight pack (Gyprock)- Plastic jar/Packet of 3 kg |
| 17 | Green stick compound- Low fusing, No stringiness on melting DPI Type (Packet of 10) |
| 18 | Impression material - zinc oxide eugenol paste (Base and catalyst, medium viscosity, uniform consistency, initial setting time 3-6 min.) |
| 19 | Impression material –addition silicone – eliteHD type Putty- (1 box(2 pairs of base & catalysttotal volume1800ml)) |
| 20 | Impression material addition silicone - light body (Base and catalyst 90 ml each Dentsplyreprosil type) |
| 21 | Wax-modelling (Red) |
| 22 | Teeth set lower anterior- (Shade24, 25, 26 medium and large; Sl, shade 24- 50% of total, shade 25- 40% of total, shade 26- 10% of total)- 1 set containing 6 teeth |
| 23 | Teeth set posterior cross linked- Set of upper and lower posteriors (Shade24, 25, 26 medium and large; Sl, shade 24- 50% of total, shade 25- 40% of total, shade 26- 10% of total) |
| 24 | Teeth set upper anterior cross linked- (Shade24, 25, 26 medium and large; Sl, shade 24- 50% of total, shade 25- 40% of total, shade 26- 10% of total)- 1 set containing 6 teeth |
| 25 | Resin Cement - IvoclarVivadentVariolinkN Intro Pack |
| 26 | Osseodensification drill- Densah by Versah Size 3.3 mm (VT 8) |
| 27 | Temporary Crown Material- GC Revotek LCTemporary Resin |
| 28 | Impression compound- Disc-type I (cake) DPI Type (Box of 5) |
| 29 | Separating medium- Cold Mould Seal 5 litre jar |
| 30 | Hand wash Soap solution- (5 litre jar) |
| 31 | Alginate Impression Material- (Dustfree, 1.125kg. CE Marking ISO 1563, Gelation time 3-4 mins.) |
| 32 | Acrylic heat cure - liquid / monomer- (Compatible to heat cure powder, 5 litre jar or tin) |
| 33 | Wire SS - Konark19- (19 G - Round - hard, 14gms) |
| 34 | Wire SS - Konark20- (20 G - Round - hard, 14gms) |
| 35 | Wire SS - Konark21- (21 G - Round - hard, 14gms) |
| 36 | Bonding agent- (IvoclarEcnom Bond type) |
| 37 | Pumice Powder (For polishing Dentures) |
| 38 | Buff wheel cloth (For polishing Dentures) |
| 39 | Narrow platform -hex driver ADIN |
| 40 | Ultra narrowplatformhandpiece driver - (FOR IMPLNAT ) |
| 41 | Ultra narrowplatform-Rachet adapter (FOR IMPLNAT ) |
| 42 | TRAY ADHESIVES- (For elastomeric impression) |
| 43 | Inra oral double sided mirror (for photography) |
| 44 | Pattern resin (post space impression) |
| 45 | Articulating paper (occlusal correction) |
| 46 | Teeth set full (acry pan Shade A2,A3) |
| 47 | Polishing cake (for acrylic) |
| 48 | Mouth mirror with handle |
| 49 | Etchant (eaz etch) |
| 50 | GICRestorative Type 9 (GC Type) |
| 51 | GIC Luting cement (GC Type) |
| 52 | Teeth Set Complete (Mould S,M,N, P-shade24, 25-) |
| 53 | Zinc Oxide Eugenol cement (Pkt of Zinc oxide Powder and Liquid) |
| 54 | Sand paper- (Grid of 100,400)- Packet of 100 |
| 55 | Emery Paper (P 400)- Packet of 50 |
| 56 | Self Cure Tooth Moulding Powder (DPI shade D-3,E-3,) |
| 57 | Heat cure Tooth Moulding Powder (DPI shade D-3,E-3,) |
| 58 | Acrylic cold cure DPI- powder- (clear 3 KG jar) |
