National Institute Of Technology-NIT has published Tender For Interior Works For Tata Centre For Artificial Intelligence And Machine Learning.. Submission Date for this Tender is 21-09-2023. Interior Work Tenders in tiruchirappalli Tamil Nadu. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 14-Sep-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 21-09-2023 |
| Sl. No. | Item Description |
| 1 | PART A : CIVIL |
| 2 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. |
| 3 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm |
| 4 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable materialwithin 50 metres lead as per direction of Engineer-in-charge In cement mortar |
| 5 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent designmix |
| 6 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :.Of area 3 sq. metres and below |
| 7 | Dismantling doors, windows and clerestory windows (steel or wood)With float glass panes of 8 mm thickness (weight notless than 20 kg/ sqm |
| 8 | Dismantling steel work in built up sections in angles, tees, flats andhannels including all gusset plates, bolts, nuts, cutting rivets, weldingetc. including dismembering and stacking within 50 metres lead. |
| 9 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area2.5 sq.meters and under, including cutting the patch in proper shape,raking out joints and preparing and plastering the surface of the wallscomplete, including disposal of rubbish to the dumping ground, allcomplete as per direction of Engineer-in-Charge e All kinds of soil |
| 10 | Earth work in excavation by mechanical means (Hydraulic excavator)/manualmeans over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan) including getting out and disposal of excavated earth leadupto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. |
| 11 | Providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering - All work up to plint level 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stoneaggregate 20 mm nominal size) |
| 12 | Brick work with common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5 in superstructure above plinth level up to floor V level inall shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 13 | Extra for brick work / AAC block masonry / Tile brick masonry insuperstructure above floor V level, for each four floors or part thereof bymechanical means. |
| 14 | 12 mm cement plaster of mix : (1 cement: 4 fine sand) |
| 15 | Providing and laying in position specified grade of reinforced cementconcrete, excluding the cost of centering, shuttering, finishing andreinforcement - All work up to plinth level |
| 16 | Centering and shuttering including strutting, propping etc. and Centering and shuttering including strutting, propping etc. and removal of form forLintels, beams, plinth beams, girders, bressumers and cantilevers |
| 17 | Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete above plinth level Cold twisted bars |
| 18 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. |
| 19 | Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 20 | Providing and laying Polished CORIAN table top in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 20 mm to 25 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. |
| 21 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. |
| 22 | Granite work |
| 23 | Providing and fixing PVC Door Frame of size 50x47 mm with a wallthickness of 5 mm (± 0.2 mm), made out of single piece extruded PVCprofile, with mitred cut joints and joint with 2 nos of PVC bracket of size190 mm x 100 mm long arms of cross section size 35 x 15 mm & selfdriven self taping screws, the vertical door profiles to be reinforced with40x20 mm M.S. rectangular tube of 0.8 mm , including providing EPDMrubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile.The door frame to be fixed to the wall using 8 x100 mm long anchorfasteners complete, all as per manufacturer"s specification and directionof Engineer -in- charge. |
| 24 | providing and fixing 35 mm thick factory made Solid panel PVC Door shutter, made out ofsingle piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, havingstyles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out ofwhich 75 mm shall be flat and 20 mm shall be tapered (on both side),having one side thickness of 15 mm integrally extruded on the hinge sideof the profile for better screw holding power, including reinforcing with MSoftube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be miteredcut & joint with the help of PVC solvent cement, self driven self tappingscrews & M.S. rectangular pipes bracket of size 190 mm X 100 mm ofcross section size 35 mm x 17 mm x 1 mm at each corner. Single pieceextruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm, out ofwhich 75 mm to be flat and 20 mm to be tapered at both ends, having 15mm solid core in middle of rail section integrally extruded, fixing thestyles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVCextruded sheet inserted in the door as panel, all complete as permanufacturer"s specification and direction of Engineer-in-charge |
| 25 | Providing wood work in frames of doors, windows, clerestory windowsand other frames, wrought framed and fixed in position with hold fastlugs or lugs or with dash fasteners of required dia & length ( hold fast lugs ordash fastener shall be paid for separately) Second class teak wood |
| 26 | Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) decorative type, core of block board construction withframe of 1st class hard wood and well matched teak 3 ply veneeringframe of 1st class hard wood and well matched teak 3 ply veneeringshutters. 35 mm thick including ISI marked Stainless Steel butt hingeswith necessary screws |
| 27 | 25 mm thick including ISI marked nickel plated bright finished M.S. Piano hinges IS : 3818 marked with necessary screws |
| 28 | Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately). |
| 29 | 18 mm thick |
| 30 | Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : |
| 31 | 125 x 64 x 1.90 mm |
| 32 | Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with : |
| 33 | Decorative veneer facings of approved manufacture |
| 34 | Providing & Fixing Mica sheet of approved brand . Rate including cost of all materials,transport,labour charges etc complete |
| 35 | Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. |
| 36 | 50 mm |
| 37 | Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. |
| 38 | Triple strip vertical type |
| 39 | Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete : |
| 40 | 90 mm |
| 41 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 42 | 125 mm |
| 43 | 75 mm |
| 44 | Providing and fixing bright finished brass handles with screws etc. complete: |
| 45 | 125 mm |
| 46 | Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc complete as per direction of Engineer- in-charge. |
| 47 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 48 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 49 | 200x10 mm |
| 50 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. |
| 51 | Twin rubber stopper |
| 52 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall |
| 53 | 20 mm nominal outer dia Pipes |
| 54 | 25 mm nominal outer dia Pipes |
| 55 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore |
| 56 | 25 to 40 mm nominal bore |
| 57 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 58 | 25 mm nominal bore |
| 59 | 20 mm nominal bore |
| 60 | Providing and fixing C.P. brass angle valveof approved quality conforming to IS:8931 |
| 61 | 15mm nominal bore |
| 62 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. |
| 63 | 15 mm nominal bore with 45 cm length |
| 64 | Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : |
| 65 | For pipes 100 to 250 mm diameter |
| 66 | "Cutting holes upto 30x30 cm in walls including making good the same :with F.P.S. bricks." |
| 67 | Providing and fixing PVC cowl to the PVC pipes etc complete as per the direction of Engineer-in-charge. 75 mm Cowl |
| 68 | Providing and fixing PVC cowl to the PVC pipes etc complete as per the direction of Engineer-in-charge. 110 mm Cowl |
| 69 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 Fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: |
| 70 | Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets : |
| 71 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 72 | "Providing and fixing Stainless steel gratings etc complete 100 mm" |
| 73 | Providing and fixing PVC corner beeding to wall tiles atc complete. |
| 74 | Providing and fixing SS gratting to floor tiles etc complete. |
| 75 | 125 mm dia |
| 76 | Providing and fixing wall mounted European type water closet pan with inbuilt flush tank with seat and lid of size 50.50x37x38 cm Constellation-Hindware, Jaquar or kohler brandcomplete as per the direction of Engineer-in-charge. The model of European water closet should be got approved from the Engineer-in-charge/E.M.Department. |
| 77 | Providing and fixing half pedestal wash basin wall hung of size 550x400x195mm with accessories of continental-Jaquar, Hindware or kohler brandas per the direction of Engineer-in-charge. The pillar cock FON-4002 with 140mm extension body (Jaquar, Hindware or equivalent brand) .The model of wash basin should be got approved from the Engineer-in-charge/E.M.Department. |
| 78 | Providing and fixing stainless steel shelf tray of ACN-1177N of Jaquar, Hindware or equivalent brand etc as per the direction of Engineer-in-charge. The model of SS shelf tray should be got approved from the Engineer-in-charge/E.M.Department. |
| 79 | Providing and fixing stainless steel towel ring of ACN-1121 BN of Jaquar, Hindware or kohler brand as per the direction of Engineer-in-charge. The model of SS shelf tray should be got approved from the Engineer-in-charge/E.M.Department. |
| 80 | Providing and fixing stainless steel health faucet (Hand shower) ALD-573 with 8mm dia, 1.20 meter long flexible tube & wall hook and SS two way tap of Jaquar, Hindware or kohler brand as per the direction of Engineer-in-charge. The model of SS health faucet and two way tap should be got approved from the Engineer-in-charge/E.M.Department. |
| 81 | Providing and fixing stainless steel wall bib cock to pipe etc Continental - 267 KN of Jaquar, Hindware or kohler brandas per the direction of Engineer-in-charge. The model of SS wall mixer tap should be got approved from the Engineer-in charge/E.M.Department. |
| 82 | Providing and fixing stainless steel pillar cock to pipe etc Continental - 267 KN of Jaquar, Hindware or kohler brandas per the direction of Engineer-in-charge. The model of SS wall mixer tap should be got approved from the Engineer-in charge/E.M.Department. |
| 83 | Providing and fixing stainless steel towel rod of 600 mm ACN-1111 SM of Jaquar, Hindware or kohler brandas per the direction of Engineer-in-charge. The model of SS towel rod should be got approved from the Engineer-in-charge/E.M.Department. |
| 84 | Providing and fixing stainless steel long nose bib cock of Jaquar, Hindware or kohler brand as per the direction of Engineer-in-charge. The model of SS long nose bib cock should be got approved from the Engineer-in-charge/E.M.Department. |
| 85 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of saint goban) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete |
| 86 | Providing and fixing of 75mm dia (Finolex or Avonplast-6kg/cm2) unplasticised Rigid PVC soil pipes conforming to IS :13592 Type A including jointing with seal ring conforming to S :5382 leaving 10mm gap for thermal expansion. (i) Single socketed pipes |
| 87 | Providing and Fixing of Mosquito Net shutter with 20mm width powder coated aluminum frame to the fixed on the wood/MS frame on the opening as per site condition.The frame shall be two vertical and three horizontal. The shutter made of stainless steel materials and operated with mini fibre hinges and with fibre stopper for 3 sides etc complete. The rate including cost of all materials and labour charges etc complete. |
| 88 | Providing and fixing Ist quality ceramic glazed wall tiles (Premium) conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 89 | Size of tile -0.30m x 0.60m. The model of tile should be got approved from the Engineer-in-charge/E.M.Dept. (Kajaria,Somanya,Nitco,RAK or equivalent brand) |
| 90 | Providing and laying Ceramic glazed floor tiles (Preminum) of size 300x300 mm or 380x380mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc., complete. Size of tile 0.30m x 0.30m or 0.38mx0.38m. The model of tile should be got approved from the Engineer-in-charge/E.M.Dept. (Kajaria,Somanya,Nitco,RAK or equivalent brand) |
| 91 | Proviidng & Fixing 100 mm PVC pipe as per the direction of Engineer-in-charge. |
| 92 | Providing and fixing PVC 100mm single Y with door fiiting to pipe etc complete as per the direction of Engineer-in-charge (Avonplast-Finolex or equivalent make). |
| 93 | Providing and fixing PVC 75mm single Y with door fiiting to pipe etc complete as per the direction of Engineer-in-charge (Avonplast-Finolex or equivalent make). |
| 94 | Providing and fixing PVC 100mm double Y with door fiiting to pipe etc complete as per the direction of Engineer-in-charge (Avonplast-Finolex or equivalent make). |
| 95 | Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm). |
| 96 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. |
| 97 | Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms |
| 98 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. |
| 99 | Single tee with door |
| 100 | 75x75x75 mm |
| 101 | 110x110x110 mm |
| 102 | Bend 87.5° |
| 103 | 75 mm bend |
| 104 | 110 mm bend |
| 105 | Coupler |
| 106 | 75 mm |
| 107 | 110 mm |
| 108 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. |
| 109 | 75 mm |
| 110 | 110 mm |
| 111 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading,transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leadsincluding all lifts involved. |
| 112 | Providing and laying vitrified floor tiles in different sizes (thickness to bespecified by the manufacturer) with water absorption less than 0.08%and conforming to IS: 15622, of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand),jointing with grey cement slurry @ 3.3 kg/ sqm including grouting thejoints with white cement and matching pigments etc., complete. Size of Tile 1000x1000 mm / 1200 x 600 mm / 600 x 600 mm |
| 113 | Providing and fixing machine cut, mirror/ eggshell polished , Marble stone work for wall lining (veneer work) including dado, skirting, risers ofsteps etc., in required design and pattern wherever required, stones ofdifferent finished surface texture, on 12 mm (average) thick cementmortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cementslurry @ 3.3 kg/sqm including pointing with white cement slurry admixedwith pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by theEngineer-in-Charge |
| 114 | Providing and fixing aluminium work for doors, windows, ventilatorsand partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved makeconforming to IS: 733 and IS: 1285, fixing with dash fasteners ofrequired dia and size, including necessary filling up the gaps atjunctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free,straight, mitred and jointed mechanically wherever required includingcleat angle, Aluminium snap beading for glazing / paneling, C.P.brass / stainless steel screws, all complete as per architecturaldrawings and the directions of Engineer-in-charge. (Glazing, panelingand dash fasteners to be paid for separately) : |
| 115 | Providing and fixing glazing in aluminium door, window, ventilator shuttersand partitions etc. with EPDM rubber / neoprene gasket etc. complete asper the architectural drawings and the directions of engineer-in-charge .(Cost of aluminium snap beading shall be paid in basic item) With float glass panes of 8 mm / 10 mmthickness (weight not less than 20 kg/ sqm) |
| 116 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windowsshutters and partition frames with C.P. brass / stainless steel screwsetc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative laminationon both sides |
| 117 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer"s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : |
| 118 | 12.5 mm thick tapered edge gypsum moisture resistant board |
| 119 | Steel work in built up tubular (round, square or rectangular hollow tubesetc.) trusses etc., including cutting, hoisting, fixing in position andapplying a priming coat of approved steel primer, including welding andbolted with special shaped washers etc. complete |
| 120 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 121 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding |
| 122 | Renewing glass panes, with wooden fillets wherever necessary: |
| 123 | Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) |
| 124 | Supplying and fixing new wooden fillets wherever necessary: |
| 125 | 2nd class teak wood fillets |
| 126 | cutting rebate in windows (Total area of shutter to be measured) |
| 127 | providing and fixing of wall paneling with Anetone /MDF board of any approved colour and shade veneered made of green max MDF board 12 mm thick with 4 mm thick veneering or equivalent having density 800 kg/mg, installed on aluminium frame work fixed on the wall with the help of screws including melemine finishing the veneering two or more coats.panels to be back lined with acoustical infill of synthetic polyster fibre 25 mm thick adhered to wall using suityable approved adhesive and ss chicken wire mesh for holding the synthetic polyster fibre etc all as per drawing and directions of engineer in charge |
| 128 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 129 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : |
| 130 | Water thinnable cement primer |
| 131 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 132 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. |
| 133 | Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. |
| 134 | French spirit polishing : |
| 135 | Two or more coats on new works including a coat of wood filler |
| 136 | Applying priming coat: |
| 137 | With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 138 | providing and fixing in wall panelling made of anutone ekcel saok plane of approved colour and shade of size 1200 x 600 x 23 thick having density of 400 kgs/cum, weight 4.20kg/sqm, with high impact resisitance, recyclable environmental friendly, UV stable resistant to fading, natural surface for mid and high frequencies sound absorption installed on H-splines having UV surface PVC vinyl core of thickness and 2400 mm, which are fixed to synth panels with necessary screws etc., |
| 139 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 140 | Two or more coats over an under coat of suitable shade with ordinary paint of approved brand and manufacture |
| 141 | Providing and Fixing Zebra brand venetion blinds to window thickness is 0.42mm etc. Rate including cost of all materials and labour charges etc complete.A) Specification of Fabric: Zebra blinds Translucent: Composition: 100% Polyester Visibility: Translucent Weight Approx.:108 g/ sq,mtr. Thickness: 0.42 mm. Window Size : 2.20 Mts width x 2.40 mts height. (Maximum) Sheer & Vale box: 75 x 50 mm Hanging Properties: Excellent Tearing Strength: Very High Cleaning : Conditionally Cleanable with damp cloth. |
| 142 | WIRING |
| 143 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor singlecorecableinsurface /recessedmediumclassPVC conduit, with modular switch, modular plate, suitable GI box and earthingthepointwith 1.5sq.mm FRLSPVC insulated copper conductor single core cable etc. as required. |
| 144 | Group C |
| 145 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable inthe existing surface/ recessed steel/ PVC conduit as required. |
| 146 | 3 x 1.5 sq. mm |
| 147 | Supplying and fixing of following sizes of medium class PVC conduitalongwithaccessoriesinsurface/recessincluding cutting the wall and making good the same in case of recessed conduit as required. |
| 148 | 25 mm |
| 149 | 32 mm |
| 150 | 40 mm |
| 151 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 152 | 5/6 A switch |
| 153 | 15/16 A switch |
| 154 | 3 pin 5/6 A socket outlet |
| 155 | 6 pin 15/16 A socket outlet |
| 156 | Telephone socket outlet |
| 157 | Supplying and fixing modular blanking plate on the existing modularplate&switchboxexcludingmodularplateas required. |
| 158 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. |
| 159 | 4 Module (125mmX75mm) |
| 160 | 6 Module (200mmX75mm) |
| 161 | DLP plasticTrunking wiring(Make: Legrand/MK) |
| 162 | DLP Pastic Trunking105x50mm and accessories Flexible cover85mm -1No, Joints for cover85mm width-1No,Basejoint-25Nos,Clips-15Nos,Separation partition-1No,Endcap-2No,Internal angles-adjustable from 80 degr - 120 deg - 1No, VDI accessories for internal angles-1No,VDI accessories for external angles -1No, Flat angles -1No, VDI accessories for flat angles-1No, Flat junctions-1No, Flat junctions for specific size-tap off to an 80mm wide branch -1No, VDI accessories for juctions -1No, Wall crossing-1No, Capacity change -1No,Capacity change-1No, partition junction -1No, Cable ties base -1No. (Make: Legrand/MK) |
| 163 | DLP Pastic mini Trunking system32x12.5mm and accessories Endcap-1No,Internal angles-adjustable from 85 degr - 95 deg - 1No,Flat junctions -1No.(Make: Legrand) |
| 164 | DLP Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessedas required.(Make: Finolex/Polycab/RR) |
| 165 | 2 X 4.0 sq. mm + 1 X 4.0 sq. mm earth wire |
| 166 | 2 X 10.0 sq. mm + 1 X 10.0 sq. mm earth wire |
| 167 | 2 X 16.0 sq. mm + 1 X 16.0 sq. mm earth wire |
| 168 | MCCB, MCB & DB"S |
| 169 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar,din bar,interconnections,powderpaintedincluding earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 170 | 12 way , Double door |
| 171 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 172 | 4 way (4 + 12), Double door |
| 173 | 6 way (4 + 18), Double door |
| 174 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of followingpolesintheexistingMCBDBcompletewith connections, testing and commissioning etc. as required. |
| 175 | Single pole |
| 176 | Supplying and fixing of following rating,double pole/single pole,240 volts,Isolator/MCB in the existing MCB/DB complete with connections,testing and commissioning etc.as required. |
| 177 | Double pole 40-63A MCB |
| 178 | Supplying and fixing of following rating,Three/four pole,415 volts,Isolator/MCB in the existing MCB/DB complete with connections,testing and commissioning erc.as required. |
| 179 | Four Pole 40-63A MCB |
| 180 | SUPPLY OF ELECTRICAL ITEMS |
| 181 | Supplying of heavy duty 960 RPM exhaust fan of following sweep, suitable for operation on 230 Volts, single phase, 50 Hz, AC Supply including suitable size louvers as required. |
| 182 | 300 mm (Heavy duty) |
| 183 | Supplying and fixing of wall mounting fan of following 450mm sweep , suitable for operation on 230 Volts, single phase, 50 Hz, AC Supply including wall braket rod and resistance type regulator as required. |
| 184 | Wall mouting fan (Medium type) |
| 185 | Repairing and painting works. |
| 186 | Removing of old conduit wiring and handover to emc stores with necessary arrangement etc. as required. |
| 187 | Removing of old tube fitting/Switch board/Fan and handover to emc stores with necessary arrangement etc. as required. |
| 188 | Supply of Light Fixtures with Lamps |
| 189 | Supply and fixing of indoor decorative LED fitting of high-efficiency luminaire range suitable for recessed/surface mounting in the modular ceiling with 600 x 600/300X300/round type/downlight/ high bay modules. (Make: Crompton Greaves, Philips, Wipro, Bajaj etc) |
| 190 | 2x2 recess mounting LED CRCO10R036HP57G1 / BZRSQL 36W GZ |
| 191 | 150mm dia rcess mounting 12W LED (DN296B LED12S-6500 PSU WH |
| 192 | Supply, Installation, Testing & Commissioning (SITC) and service support (warranty) of 2 TR cassette type air-conditioners |
| 193 | Supply, Installation, Testing & Commissioning (SITC) of factory-made air-conditioners having energy efficient compressors, condenser and evaporator coil, aesthetically finished indoor units, automatic temperature control, safety controls, including supply & filling of required quantity of any Eco-friendly refrigerant to maintain prescribed temperature levels as recommended by the manufacturer, cordless remote etc., complete having capacity 2.0TR- 6000Kcal/hr, 230V, 50 Hz, 1Phase, Non- Invertor - Cassette type ceiling mounted (2 star & above)Air Conditioners with 4 way Air distribution.The air-conditioners along with all accessories and workmanship including installation work shall conform to all mechanical and electrical safety standards as per relevant IS specifications. The equipment shall be properly earthed (connected to the earthing system of the electrical cabling of the premises) Also Supply, and installation of MS - powder coated stand for mounting outdoor condensing units. Necessary opening on the wall may be done for drawing copper tubing and cabling finishing with cement plaster etc. Proper warranty certificate to be produced after installation. (Approved makes: Voltas, Blue Star, Carrier, O-General, Hitachi, Samsung, LG and Toshiba) Colour : white Cooling capacity: 6000 kcal/hr Auto Air swing: 4way Digital display for temperature : |
| 194 | SITC of hard drawn copper pipes with thick insulation for suction and discharge line for cassette AC should be proper clamping and mounting. Size: 3/8 “ & 5/8” – (Size may be vary according to the manufacturer) |
| 195 | SITC of power and control cables for interconnecting indoor and outdoor units 6 Sq.mm cable (Size may be vary according to the manufacturer) |
| 196 | SITC of HDPE PVC drain pipe 1” with proper accessories |
| 197 | Supply and installation of 5 KVA stabilizers for 2 TR Cassette AC unit of a standard make with suitable wall mount option. Make: V-Guard – VG500 Model -operating voltage: 170VAC-270VAC, Current rating: 15A, Time delay: ITDS 3 Min ± 20 sec, Warranty certificate to be produced after installation. Warranty : 3 years |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
