Tender For 8174/2023-24 Spl Repair To Bldg No T-420 Of 63 Engr Regt At Karu, Provn Of Toilet Block Alongwith Allied Infra At 270 Transit Camp At Karu, Provn Of Sentry Post At Main Gate Of 769 (I) Tk Tptr Pl Asc And Spl Repair To Internal Electric Sup
Tender Value
42.27 Lakhs
Estimated cost
Bid Submission
20 Sep 2023
0 days left
EMD
84600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
durbuk → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Spl Repair To Bldg No T-420 Of 63 Engr Regt At Karu, Provn Of Toilet Block Alongwith Allied Infra At 270 Transit Camp At Karu, Provn Of Sentry Post At Main Gate Of 769 (I) Tk Tptr Pl Asc And Spl Repair To Internal Electric Supply Of Bldg Spl Repair To Bldg No T-420 Of 63 Engr Regt At Karu, Provn Of Toilet Block Alongwith Allied Infra At 270 Transit Camp At Karu, Provn Of Sentry Post At Main Gate Of 769 (I) Tk Tptr Pl Asc And Spl Repair To Internal Electric Supply Of Bldg No T-301 (Ma
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 13-Sep-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 20-Sep-2023 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs blankets any thickness, including cover fillets including scantling complete all as specified and directed. |
| 2 | S&F of coloured PVC designer Modular wall clading 5 to 6mm thick with air gap between installed with U shaped GI Channel with end joints on edges (Designed, colour patterns as per directed by GE). The frame work will be fixed to wall using aluminium screws complete all as specified and as directed.Note :- If necessary size of the frame work/wall panelling will be changed as per site requirement |
| 3 | M&L 9 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & otherside balancing white lamination, fixed with nails to timber framework in walls complete all as specified and as directed. |
| 4 | Providing &fixing false ceilingwith semi perforated 12mm thick micro tegular edged GRG at all heights with GRG false ceiling tiles of size 595X 595 mm of approved texture design and patterns having moisture content less than 2% humidity resistance of 99% NRCO.50 to 0.75 as per IS 8225:1987,Noncombustible as per BS476(part4)-1970 and light reflectance of 85%(min) to be laid in true horizontal level suspended on inter locking metal T-grid of hot dipped galvanised iron sec of 0.33 mm thick (galvanised @ 120 grams per sqm incl both sides) comprising of main -T runners of size 15x 32 mm of length 3000mm ,cross-T of size 15X32 mm oflength 600 mm to form grid module of size 600 x600 mm suspended from ceiling using galvanized mild steel items (galvanizing @80mm per sqm ) i.e 50mm long 8 mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shapeleveladjuster of size 85 x 25 x 2 mm ,Galvanised iron perimeter wall angle of size 24 x 24x 0.40 mm of length 3000 mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws.The work shall be carried outas per specifications,drawing and as per directions of the Engr-in-Charge |
| 5 | S&F aluminium anodised partition/windows/Ventilatorswith side hung shutters / sliding shutters and frame made with aluminium section with and including glass/particle board 12mm thick (as specified below)Aluminium sections shall be of size as given below:- Frame : 44.5x44.5x1.60mm thickTop/bottom rail; 90x44.5mmx1.60mm thickside style/rails of shutter-44.5x44.5mmx1.60mm thickGlass : 5mm thick plain glass, sun control film fixed with rubber gasket with aluminium beading . Aluminium fitting such as peg stay, aluminium hinges, aluminium handle 100mm long, aluminium tower bolt 100mm long and making good of wall surface with matching to existing surface complete all asspecified and directed |
| 6 | Taking down chowkhats or frame exc 1.50 sqm each but n exc 4 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed by Engr-in Charge |
| 7 | Taking down chowkats or frame not exc 1.5 sqm each with shutters without taking off shutters from the frames complete all as specified and as directed by Engr-in-Charge |
| 8 | Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded jointed as specified as directed |
| 9 | S&F for 2nd Class hard wood Plain, solid, straightchowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinnedat joints complete all as specified and directed |
| 10 | S&F of 30mm thick 2nd class hard wood glazed and skelton shutters, open rebated and prepared to receive glass gauge etc divided into suqares with plain chamfered or rounded, mittered edges of framing plain, chamfered or rounded complete all as specified and directed by Engr in Charge |
| 11 | S&F100mm Butt hinges, medium weight, cold rolled mild steel, and fixedcomplete all as specified and directed |
| 12 | S&F150mm Aluminium anodised, barrel tower bolts of extruded section and fixedcomplete all as specified and directed |
| 13 | S&F150mm Aluminium handles, cast type, anodisedcomplete all as specified and directed |
| 14 | M&L for two coat of synthetic enamel (ordinary tint each coat) over a coat priming with pink primer on new or previously untreated wooden surfacecomplete all as specified and directed. |
| 15 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed. |
| 16 | S&F 4mm thick sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5sq. m in each pane complete all as specified and directed by Engr in Charge |
| 17 | S&F in repair of galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.00mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed by Engr in Charge |
| 18 | S&F in repair of aluminium (extruded section body) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as speicified and directed |
| 19 | Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as directed. |
| 20 | M&L for joint free glazed ceramic coloured tiles 350x 250x 7mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match on vertical surfaces over plastered surface such as skirting dado etc including circular cutting or notching and waste etc over and including 10mm thick screed bed or bedding layer of cement mortar in cement mortar 1:4 complete all as specified and directed |
| 21 | M&L for coloured ceramic non skid joint free tiles of size 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, over and including 15mm thick screed bed or bedding layer of cement mortar in cement mortar 1:6 in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchcomplete all as specified and directed |
| 22 | M & L For Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with treating the surface with polish over and including 15mm thick screed bed in cement mortar 1:4 all as specified and directed |
| 23 | Demolition of Bricks work or stone/boulder masonary, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stonework and precast concrete aritcles complete all as specified and directed. |
| 24 | M & L Precast cement concretesolid block made of cement concrete type C-1 1:3:6 using (20mm graded crushed stone aggregate) in masonary , exc. 10cm in width and, setting incement mortar 1:6 complete all as specified and as directed. |
| 25 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed |
| 26 | M&L forRendering 15mm thick, in cement mortar 1:4 on PCC block wallingor concrete surfaces andfinished even and fair without using extra cement complete all as specified and as directed |
| 27 | M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed. |
| 28 | Material and labour for 25mm thick type B-0 PCC 1:2:4 (12.50mm graded aggregate in sub baseall as specified and directed |
| 29 | Taking up or down 15mm dia steel tubing and connections, complete all as specified and as directed. |
| 30 | Taking up or down 20mm dia steel tubing and connections,complete all as specified and as directed. |
| 31 | S&F 3 layer PP-R Polypropylene random copolymer outer dia of pipe 16 mm pipes SDR 7.4 (PN-16) UV stablized and anti microbial fusionwelded having thermal stavility for hot & cold water supply including all PPR plain & brass threaded polypropylene random fittings fixed complete to walls, celling or in floors etc complete all as specified and directed. |
| 32 | S&F 3 layer PP-R Polypropylene random copolymer outer dia of pipe 20 mm pipes SDR 7.4 (PN-16) UV stablized and anti microbial fusionwelded having thermal stavility for hot & cold water supply including all PPR plain & brass threaded polypropylene random fittings fixed complete to walls, celling or in floors etc complete all as specified and directed. |
| 33 | S&F in repair vitreous china squatting Pan of Orrisa pattern 580 mm x 440 mm with integral foot rest white with CI \"P\" or \"S\" trap front or back inlet including PCC bedding complete all as specified and directed |
| 34 | S & F in repair of PVC (Plastic polymer Cistern) low level white flushing cistern 10 litre capacity valve less, syphonic action type, complete with inlet, ball valve, float valve, bends, brackets, brass screws, handle etc complete all as specified and directed. |
| 35 | S&F in repair of 15 mm bore stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe and fixed. |
| 36 | S&F in repair of 20 mm bore Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed |
| 37 | S&F in repair of Viterous China wash hand basin with pedestal coloured, flat back of 550 x 400 mm including brackets, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia, PVC flexible waste pipe of 750mm long complete all as specified and directed |
| 38 | S&F in repair of 15mm bore pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified |
| 39 | S&F in repair of 15mm bib taps, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed |
| 40 | S&F in repair of PVC connection15mm size with PTMT nuts of length 450mm fixed complete all as specified and directed. |
| 41 | S&F 32mm bore and 800mm long PVC corrugated waste pipe complete all as specified and as directed by Engr-in-Charge |
| 42 | S&F in repair looking 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium complete all as specified and as directed by the Engr-in-Charge |
| 43 | S&F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges as directed by the Engr-in-Charge |
| 44 | Demolition of cement concrete (Unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level)complete all as specified and as directed. |
| 45 | M&L for 75mm thick PCC (1:3:6) type C-2 (Using 40mm graded crushed stone aggregate) as in floor levelling and finished even and fair without using extra cement complete all as specified and as directed. |
| 46 | M&L for sceed bed or bedding layer of cement mortar 20 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and as directed. |
| 47 | M&L for plastic moulded Chequered cement concrete with white cement and pigment tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors complete all as specified and as directed. |
| 48 | Dismantling water tanks exc 250 ltr & n exc 500 Ltr complete all as specified and directed by Engr in Charge |
| 49 | Supply and fixing500 litres capacityrotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top), triple layered, hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed. |
| 50 | S&F PVC (SWR) pipes 75mm dia, single socketed in any length with rubber ring joints fixed to walls including dismantling of existing pipe complete all as specified and directed |
| 51 | S&F PVC (SWR) pipes 110mm dia, single socketed in any length with rubber ring joints fixed to walls including dismantling of existing pipe complete all as specified and directed |
| 52 | Supply and fixing in repairs to Factory made, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, 30 mm thick, ISI marked, complete all as specified and as directed. |
| 53 | Material and labour for preparing surfaces of new or previously untreated surfaces ofsteel or metal works and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for surfaces over 10cm in width or girth complete as specified and as directed. |
| 54 | Dismantling of mild steel work of any descriptionall as specified and directed |
| 55 | M & L for Mild steel work in tubular trusses including special shape washers etc compete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade st-240 complete all as specified and as directed. |
| 56 | Dismantling plain or corrugated steel sheeting any guage, thickness including nainital or similar pattern roof covering and wall cladding complete all as specified and directed |
| 57 | M&L for Galvanised, corrugatedmild steel sheeting with two corrugations side lap, fixed with coach screws and washers/Ltype or J-type or cranked hook bolts , in roofs, walls etc. with grade of zinc coating 275 as specified as directed |
| 58 | Material and labour for preparing old paintedsurfaces ofsteel or metal works and applying one coats of synthetic enamel paint for surfaces over 10cm in width or girth complete as specified and as directed. |
| 59 | M&L 6mm Veneered decorative plywood grade I (with BWR resin) with decorative face veneers on one face fixed with screws to timber frame work in ceiling complete all as specified and as directed. |
| 60 | Dismantling of timber fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section frame work complete all as directed. |
| 61 | M&L second class hard woodtimber scantling plain fillets square, rectangular or triangular in section, clean sawn, secured with nails or brads, sectional area exc. 13 Sq cm & n.exc 25 Sq cm secured with nails or brads complete all as specified and as directed. |
| 62 | M&L second class soft wood timber scantling plain fillets square, rectangular or triangular in section, clean sawn, secured with nails or brads, sectional area exc. 0.3 Sq cm n.exc 6 Sq cm secured with nails or brads complete all as specified and as directed.. |
| 63 | S&F 35 mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressuretreated complete all as specified and as directed. |
| 64 | S&F150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floorcomplete all as specified and directed |
| 65 | S&F 250mm long, Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed. |
| 66 | S&F75mm Butt hinges, medium weight, cold rolled mild steel, and fixedcomplete all as specified and directed |
| 67 | S&F 100mm long extruded aluminium alloy handle cast type complete all as specified anddirected. |
| 68 | Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips all asdirected. |
| 69 | Supply and fixing 3 mm sheet glassthick ordinaryquality andglazing with oil putty in squares n. exc0.5 Sqm in each pane complete all as specified and directed. |
| 70 | Supply and fixing galvanised mild steel wire cloth,0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples. |
| 71 | M&L for 75mm thick PCC (1:3:6) type C-2 (Using 40mm graded aggregate) as in plinth protectionand finished even and fair without using extra cement complete all as specified and as directed. |
| 72 | M&L for 10mm thick rendering on fair faces of Brick or stone masonry surface in cement mortar 1:6finished even and smoth complete all as specified and directed |
| 73 | M&Lfor preparation surface and apply three coats of white wash on newly plasteredsurface complete all as specified and directed. |
| 74 | S&F 0.63 plain, Galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings, fixed with coach screws and washers/Ltype or J-type or cranked hook bolts , in roofs, walls etc. with grade of zinc coating 275 as specified as directed |
| 75 | Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed. |
| 76 | M&L for Plain cement concrete type D-2 1:4:8 (40mm graded aggregate) as in foundation, filling and mass concrete complete all as specified and as directed. |
| 77 | M&L for reinforced cement concreteType B-1 1:2:4 using 20mm graded aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed. |
| 78 | M&L for reinforced cement concreteType B-1 1:2:4using 20mm graded aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed. |
| 79 | M&L for reinforced cement concreteType B-1 1:2:4using 20mm graded aggregate as in Columns, pillars, piers, posts and struts complete all as specified and as directed. |
| 80 | M&L for reinforced cement concreteType B-1 1:2:4using 20mm graded aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the likecomplete all as specified and as directed. |
| 81 | Use and waste of Steel sheet form work to sides of concrete foundations,footingsa, bases of columns raft and beams sides and soffits(if any) of foundations and plinth,beams and similar work,vertical or to batter,for rough finished flat surfaces of concrete complete all as specified and as directed. |
| 82 | Use and waste of Steel sheet formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc rough finished surfaces of concrete complete all as specified and as directed. |
| 83 | Use and waste of Steel sheet formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed. |
| 84 | Use and waste of Steel sheet formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) etc rough finished surfaces of concrete complete all as specified and as directed. |
| 85 | Use and waste of Steel sheet Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide ® rough finished surfaces of concrete complete all as specified and as directed. |
| 86 | M &L mild steel TMT bars 10mmdia and over cut to length, bent to shape required, including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire(annealed ) not less than 0.9mm dia or securing with clip complete all as specified and as directed. |
| 87 | M &L mild steel TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, cut to length, bent to shape required, including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire(annealed ) not less than 0.9mm dia or securing with clip complete all as specified and as directed. |
| 88 | S&F 20mm dia brass chromium plated tubular towel rails, D type, 60cm long between flanges, complete all as specified. |
| 89 | M&L Hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface in broken stone or boulders complete all as specified and directed. |
| 90 | M&L for 100 mm thick Cement Concrete type C-2,1:3:6 (40 mm graded crushed stone aggregate) as in Sub base to floors complete all as specified and directed. |
| 91 | M&L for Glazed ceramic tiles 350x 250x 7 mm/ 450X 350X 7mm thickmm thick coloured/shaded as in vertical surfaces such as skirting dados etc set and jointed in neat cement slurry over and including 15 mm thick backing coat in cement mortar 1:4 and pointed in coloured cement to match the surface complete all as specified and as directed. |
| 92 | Rendering 15mm thick in cement mortar 1:4 using water proofing compound as per manufacturer\"s instruction in two layers, finished even and smooth surface without using extra cement -External Plaster (WPC shall be measured and paid separately) complete all as specified and directed. |
| 93 | Rendering 5mm thick in cement mortar 1:3 finished even and smooth without using extra cement on ceilings |
| 94 | M&L for preparation of new plastered surfaces and apply two coats of cement base paint over a coat of primer complete all as specified and directed. |
| 95 | M&L 3 coats of white wash on ceilings on newly plastered prepared surface complete all as specified and directed. |
| 96 | Supply only water proofing compound all as specified. |
| 97 | S&FVitreous china ( EWC)pedestal pan and trap , including connection to drain( or outgoing pipe ) and to flushing pipe antisyphonage pipe, with seat cover etc complete including concrete and making good to floor complete all as specified and as directed. |
| 98 | S & F of PVC low levelwhite flushing cistern 10 litre capacity valve less, syphonic action type, complete with inlet, ball valve, float valve, bends, brackets, brass screws, handle etc withflush pipe of polyethylene of low density 32 mm diaof suitable length and making all connection complete all as specified and directed. |
| 99 | S&F 600 x 450 mm beveled edged mirror of selected quality mounted on 8mm thick plywith chromium plated brass screw and cup washers and fix in repairs complete all as specified and directed |
| 100 | S&F Viterous China WHB 550 x 400 mm flat back including cutting forand pinning in ends of brackets or erecting stand CP Pillar tap 15mm, CP Waste coupling 32mm, PVC waste pipe 750mm long and brackets complete all as specified and as directed. |
| 101 | S & F of 75 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint laid in trenches or in floors complete all as specified and as directed. |
| 102 | S & F of 110 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint laid in trenches or in floors complete all as specified and as directed. |
| 103 | S&F rotational moulded polythylene water storage tanks 500 ltr capacity(cylindrical vertical with closedtop ), triple layered, hoisted and fixed in position complete with ball valve of high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball and screwd for iron pipe 20mm bore omplete allas specified and directed. |
| 104 | S&F floor trap of PVC 75 mm out let diawith grating and jointed to waste pipe complete all as specified and as directed. |
| 105 | M&L forPVC (SWR) 110 mm gully trap setting joining with solvent cement complete all as specified and directed. |
| 106 | M&L 75 mm thick Cement concrete type B-2, 1:2:4 (40mm graded aggregate) plinth protection complete all as specified and directed. |
| 107 | S&F 20 mm bore Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed. |
| 108 | S&F 15 mm bore Angle cock, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe and fixed complete all as specified and as directed. |
| 109 | S&F PVC connection 15mm size with PTMT nuts of length 450 fixed complete all as specified and directed. |
| 110 | S&F bib taps,15mm bore cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified. |
| 111 | Supply and fix 15mm bore pillar taps CP brass chromium plated fancy type screwed down high pressure with chromium plated screwed shanks and fly nuts complete screwed for iron pipe in repairs all as specified and directed. |
| 112 | Plain cement concrete 1:3:6 Type C-2 (using 40mm graded crushed stone aggregate) as in bed to drain pipes including packing under and hunching against the sides of pipes after they are laid and tested for 150 mm bore SGSW pipe complete all as specified and as directed. |
| 113 | S & F150mm dia, PVC (SWR) pipes single socketed,inanylength with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 114 | Rendering 20mm thick in cement mortar 1:4 using water proofing compound as per manufacturer\"s instruction in two layers, finished even and smoothe surface without useng extra cement as in roof (WPC shall be measured and paid for separately) complete all as specified and directed. |
| 115 | S & Finfor Vitreous China bowl type urinals, size of 465x355x265mm white(minimum) with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (excluding of fixing supply pipe, flushing cistern, flush pipe, trap and waste pipe) complete all as specified and directed. |
| 116 | M & L for two coat of synthetic enamel paint of approved tint on steel and iron surfaces of any description over 10 cm width or girth not otherwise described over a coat of red oxide complete all as specified and directed. |
| 117 | S&F 300 mm aluminium alloy anodised sliding door bolt with hasp, staple complete all as specified. |
| 118 | Excavating over areas, n.exc 1.5 m deep and getting out in hard/dense soil complete all as specified and as directed. |
| 119 | Excavating over areas, n.exc 1.5 m deep and getting out in hard/dense soilfor each additional 1.5 m or part thereof in depth beyond the first 1.5m complete all as specified and as directed. |
| 120 | M&L for walling of random rubble stone masonry, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:4 complete all as specified and as directed. |
| 121 | M&L for walling of random rubble stone masonry, uncoursed, well bonded, bedded and solidly hearted, laid dry complete all as specified and as directed. |
| 122 | Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; for rough finish and flat surfaces not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed. |
| 123 | Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide, rough finished surfaces of concrete complete all as specified and as directed. |
| 124 | M & L for providing RCC M- 25 (Design mix) (using 20mm graded stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the likecomplete all as specified and as directed. |
| 125 | Supply and fixing mild steel framed work as in doors,windows, or gates of angle or other sections with gusset plates, rails, braces, Grade Fe 410 -W (GdeE- 250) quality A etc complete drilled for fixing to steel sheeting or other covering, doors, etc, to be prepared for hanging or sliding with and including |
| 126 | M&L for 15 mm thick Screed bed or bedding layer of cement mortar 1:6 laying floor finishes complete all as specified and as directed. |
| 127 | M&L for 100 mm thick plain cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate complete all as specified and as directed. |
| 128 | M&L for Glazed ceramic tiles 350x 250x 7 mm/ 450X 350X 7mm thickmm thick coloured/shaded as in vertical surfaces such as skirting dados etc set and jointed in neat cement slurry over and including 15 mm thick backing coat in cement mortar 1:6 and pointed in coloured cement to match the surface complete all as specified and as directed. |
| 129 | S&F of pre- painted galvalume aluminum zinc coating GI based corrugated/ trapzodal, semi corrugated steel sheet0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws / L-type or J-type or cranked hook bolts in lieu of screws with bituminious washer as specified and directed. |
| 130 | M&L for pre cast cement concrete type C-1 1:3:6 (20mm graded crushed stone aggregate) set in cement mortar 1:6 in landings ,cover slabes, (for manholes etc)string coursesas specified and directed. |
| 131 | Surface dressingn.exc 15 cm deep in soft /loose soil complete all as specified and directed |
| 132 | M&L mild steel TMT bars 6to 8mm dia and over in reinforcementcut to length bent to shape required incl hooking ends and binding with MS wire (annealed) not less than 0.9mm dia all as directed and specified. |
| 133 | S&F125mm Butt hinges, medium weight, cold rolled mild steel, and fixedcomplete all as specified and directed |
| 134 | S&F100mm Aluminium anodised, barrel tower bolts of extruded section and fixedcomplete all as specified and directed |
| 135 | S&F 300 mm aluminium alloy anodised sliding door boltwith hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed |
| 136 | M&Lfor preparation surface and apply two coats of oil bond distemper over a coat of primer on newly plasteredsurface complete all as specified and directed. |
| 137 | S&F vitreous china squatting Pan of Orrisa pattern 580 mm x 440 mm with integral foot rest white with CI \"P\" or \"S\" trap front or back inlet including PCC bedding complete all as specified and directed |
| 138 | S&F of 15mm bib taps, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed |
| 139 | Taking down carefully alluminium / copper point wiring complete for light, fan, socket or power point etc with fittings fixtures such as ceiling rose, holders, electric fittings, switchs, sockets, aluminium conductor cable with and incl wooden batten or FR PVC conduit and its accessories such as wooden gutties, rawl plugs, GI screws, aluminium clips, nails etc complete and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing, OBD etc as required, complete all as specified and directed. |
| 140 | M&L point wiring complete with single core FRLS PVC insulated, unsheathed, multi stranded copper conductor cables 1.5 Sqmm 1100 volts grade, with and incl 1.5 Sqmm FRLS PVC insulated, unsheathed, multi stranded copper conductor cables as continuous earth wire connected to metallic bodies of luminaries / fans etc at one end and to common earth dolly at other end, complete wiring drawn through & PVC casingand cappingof 25 mm and above (as per conductor run ) medium grade, ISI marked, incl all accessories & fittings / junction boxes / inspection covers etc, with and incl surface PVC Boxes of suitable size fixes with wall surface,Gang box for top cover suitable for fixing of piano type switches / sockets etc, complete all as specified and directed for the following :- Make of wire :Polycab / Standard / KEI / C&S / Finolex |
| 141 | One light / bell / buzzer / exhaust fan point controlled by one no, 1-way, 5 Amps switch. |
| 142 | All as per item No 140 above but One socket outlet 3 pin, 5 Amps on independent board, controlled by one no 5 Amp switch. |
| 143 | All as per item No 140 above, but for one 3 pin socket outlet 5 Amp on same board complete all as specified and as directed by the Engineer-in-Charge. |
| 144 | All as per srl item no. 140 here-in-before but with 2.5 sq mmFRLS copper wire with 1.5 Sqmm FRLS copper earth wire for indpendent 15 Amp point. |
| 145 | S&F of Switch piano type, single pole, one way, 5 amps, 230 volts, complete all as specified and directed. |
| 146 | S&F of Switch Socket combination, two-in-one, 5 pin, 5 Amp, universal type, 230 volts, complete all as specified and directed. |
| 147 | S&F of Switch Socket combination, 6 pin, 5/15Amp, multipurpose shutter type, 230 volts, complete all as specified and directed. |
| 148 | S&F of Ceiling rose, two to three terminals, bakelite body, 230 volts, complete all as specified and directed. |
| 149 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 150 | S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size |
| 151 | S&F in replacement Lamps Holder PVC/ polycabonate by with back plate angular type |
| 152 | S & F LED bulb 9W for fixing with lamp holder complete all as specified. |
| 153 | S&F in replacement of DB, double Door, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, SPN 8 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof, suitable for incorporation of MCB’s and isolators etc and making all necessary connections, duly flush of wall surface, complete all as specified and directed. |
| 154 | S&F in replacement of MCB, C Curve type, 10 kA, 40 to 63 Amp, SPN with over load and short circuit protection, complete all as directed. |
| 155 | S&F in replacement of MCB, C Curve type, 10 kA, 6 to 40 Amp, Single Pole with over load and short circuit protection, ccomplete all as specified and directed. |
| 156 | Supply and laying XLPE insulated, armoured, heavy duty electric cable, with stranded aluminum conductor 1100 V grade nominal cross sectional area 10 Sqmm, 2 core laid in trenches, ducts, drawn through pipes across the road/path/along poles/wall/floors/equipment etc including jointing and testing complete all as specified and directed |
| 157 | Excavation in trenches not exceeding 1.5m and not exceeding 1.5m in depth for laying of electric cableand getting out in hard and dense soil, complete all as specified and as directed by the Engr-in-Charge. |
| 158 | Returning, filling in excavated soil, including leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed by the Engr-in-Charge. |
| 159 | Removing excavated material (soil) not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed |
| 160 | Material and labour for un-reinforced pre-cast concrete cable covers, class LV type-1, flat size 250mm x 150mm x 40mm thick complete all as specified. |
| 161 | Material and labour for sand cushioning to under ground electric cable all as per clause No 19.75 of MES SSR Part-I (2009).NOTE: Punned down thickness ie. 18 cm thickness of sand shall only be measured |
| 162 | M&L for earthing with galvanized steel earth plate electrode of size 600 x 600 x 6 mm buried directly in ground earth pit not less than 2.25 mtr below of normal ground level with top edge of earth plate should not less than 1.5 mtr below normal ground level and connected to galvanized iron earth lead wire of size 4 mm dia by means of bolts, nuts, washers of galvanized iron or steel all as shown in electrical plate No.3 of MES SSR Part I connecting to earthing test point on completion with and including 15 mm bore GI light grade protection pipe (7.5 mtr long) for earth lead GI lead wire 4mm dia (7.5 mtr long), PCC pit with cover in PCC 1:2:4 type B-1 reinforced with 8 mm dia tor bars @ 80mm C/C, 20mm dia medium grade watering pipe with funnel, wire mesh, common salt, charcoal, necessary excavation and earth work, complete all as specified and directed. |
| 163 | Supply and fixing socket outlet multipurpose 2 pin and 3 pin, 5 Amp, flush type complete all as specified and as directed by the Engineer-in-Charge. |
| 164 | Supply and fixing switch socket combination multi purpose 2 in 1, 3 pin 5 Amp and 15 Amp, flush type complete all as specified and as directed by Engr-in-charge. |
| 165 | Supply and fixing angular lamp holder, metal cased body of brass with back plate including 09 Watt inverterLED Bulb with 3 to 4 hrs Backup , including Plastic square box of required size complete all as specified and directed by the Engineer-in-Charge |
| 166 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. |
| 167 | Supply and fix decorative wall mounted , wall mounting, champagne gold finish fixture with plastic body suitable forretrofit LED Bulb complete all as specified and as directed. |
| 168 | Supply and fixing sheet Metal enclosure double shutter type for DB’s 240 Volts Single Pole and Neutral 12 way with 200 Amps rated bus bar complete including wooden board of required size duly painted with matching colour paint acomplete all as specified andas directed by the Engr-in-Charge.. |
| 169 | Supply and fixing SPN 40 to 63 Amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of Single pole and neutral in the MCB DB complete with connection testing and commissioning. |
| 170 | Supply and fixing SP 5 to 32 Amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of Single polein the MCB DB complete with connection testing and commissioning. |
| 171 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 2 core complete all as specified and as directed. |
| 172 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 380mm sweep with, blades, and frame and louvers including cutting wall/sheet to required size for fixing the fan as per site requirement and making good distrubed surface after fixing complete all as specified and direcrted |
| 173 | S&F exhaust fans AC single phase 230/ 240 V of size 300 mm sweep (plastic body) with louvre complete including making hole in the wall and making good the disturbed surfaces complete all as directed |
| 174 | Supply and fixing sheet Metal enclosure double shutter type for DB’s 240 Volts Single Pole and Neutral 4 way with 200 Amps rated bus bar complete including wooden board of required size duly painted with matching colour paint complete all as specified andas directed |
| 175 | Supply and laying or fixing or passing through pipe, 1100voltsgrade heavy dutycablewith stranded conductgor PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tapeandoverall PVC sheathed10sq.mm2 core nominal cross section in service connections complete all as specified andas directed |
| 176 | Supplying & Laying, connecting and testing GI pipe 25 mm bore dia medium grade including necessary fittings in trenches complete all as specified and directed |
| 177 | Supply and fix Gun Metal Gate Valve 25 mm bore dia with iron wheel head,and all as directed by Engineer - in-Charge: |
| 178 | M & L for Cutting and tapping in 25 mm water mains ( in position) for branch connections complete all as specified . |
| 179 | S&F in replacement exhaust fans made of sturdy Engineering plastic AC single phase 230/ 240 V of size 250 mm sweep with louvre complete in cluding making hole in the wall and making good the disturbed surfaces complete all as directed. |
| 180 | M&L for sub main wiring with 2 runs of 6 Sqmm FRLS, PVC insulated, unsheathed and stranded copper conductor cable with and including 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable as earth wire connected with thimble from main DB to sub main DB, drawn in to separate, ISI marked, non metallic PVC conduit 20 mm dia size incl all conduit accessories & fittings / junction boxes / inspection covers etc, with and including cutting chasing and making good of disturbed surface of wall / floor/ ceiling etc as original by brick work, plastering, white washing, OBD etc as required, complete all as directed.Note : 1. The cost of conduit & accessories is deemed to be included in quoted rates. 2. The two run of 6.0 Sqmm wire and one run of 6 Sqmm wire will be measured as one unit. |
| 181 | Supply and fixing sheet Metal enclosure double shutter type for DB’s 240 Volts Single Pole and Neutral 8 way with 200 Amps rated bus bar complete including wooden board of required size duly painted with matching colour paint acomplete all as specified andas directed. |
| 182 | Supply and fixing LED lights fitting 1x 16W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. |
| 183 | Supply and fixing SPN 32 Amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of Single pole and neutral in the MCB DB complete with connection testing and commissioning complete all as specified and as directed. |
AI Tender Summary
Tender Timeline
Sep 13, 2023
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 20, 2023
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedSep 20, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 22, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender