|
| 1 | A.) CONSTRUCTION OF PUMP HOUSE ( INSIDE SIZE 3.0 M x 2.5 M -2 NOS)A-1. Earth work in excavation in foundation in all kinds of soil with in 50 m initial lead and 1.50 m initial lift including breaking of clods to maximum 5 cm to 7 cm in size and laying in layer not less than 0.30 m depth including leveling and dressing the bed etc all complete |
| 2 | A-2). Sand filling in foundation and plinth well watered and rammed including cost carriage and royalty |
| 3 | A-3). CC(1:4:8) with 4 cm size HG metal including cost carriage royalty of all materials |
| 4 | A-4). Fly Ash Brick masonry in CM(1:6) in foundation & plinth including cost carriage royalty of all materials |
| 5 | A-5). Fly Ash Brick masonry in CM (1:6) in superstructure including cost carriage royalty of all materials |
| 6 | A-6). Smooth Centering and shuttering for RCC work including cost carriage royalty of all materials and dismentalling them after casting etc all complete.a) R.C.C. Foundation, Plinth Bend |
| 7 | A-7b) RCC Lintel |
| 8 | A-8c) RCC Roof and chajja |
| 9 | A-9). RCC (1:1.5:3) with 12 mm size HG chips in super structure including hoisting lowering and laying the concrete including cost carriage royalty of all materials |
| 10 | A-10). 2.5 cm thick gradingconcrete (1:2:2) on roof slab with 6 mm size hard granite chips on new work including cost carriage royalty of all materials |
| 11 | A-11). Cutting bending bindig and tying the MS grills and placing in position including cost and carriage of MS rod and cost of binding wire including carriage of all materials |
| 12 | A-12). 12mm thick cement plaster (1:4) over brick masonry work including cement punning and bituminus painting over top of wall including cost carriage and royality of all materials |
| 13 | A-13). 12mm thick cement plaster (1:6) over brick masonry work including cost carriage and royality of all materials |
| 14 | A-14). Supplying all matrials, labour, T&P for providing 6mm thick cement plaster (1:4) to RCC surface finished smooth with closed deep chiping and slurry treatment including cost carriage, royalityand taxes of all materials, labour etc. all complete as per direction of Engineer in Charge |
| 15 | A-15). Providing & Fixing Ceramic tiles of size (300mm X 300mm ) in floors on 25mm thick bed & cement mortar 1:1 jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete etc. as per direction of Engineer in Charge. |
| 16 | A-16). Providing & Fixing ceramic glazed tiles in walls, dadoes skirting and risers of steps on 12mm thick bed of cement mortar( 1:3) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete etc. as per direction of Engineer in Charge. |
| 17 | A-16).Providing & Fixing chequered tiles in floors treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1cement : 1sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete etc. as per direction of Engineer in Charge. Tread |
| 18 | A-17).Providing & Fixing chequered tiles indados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing completeetc. as per direction of Engineer in Charge. Rise |
| 19 | A-18).Supplying all materials labour T&P and providing cement washing one coat to new plastered surface including transportation charges taxes etc all complete |
| 20 | A-19).Supplying all materials labour T&P and finishing wall with water proffing cement paint of approved shed on new work two coats to give an even shade including cost of paints, taxes etc all complete as per direction of EIC. |
| 21 | A-20).Supplying all materials labour T&P and fitting and fixing of MS fabricated,welded window (2 leaf) shutter with frame and grill.Frame made up of 40mmx40mmx6mm sizeangle,shutter made up of 30mmx30mmx5mm size angle,19mmx5mm flat and 18gauge GI sheet and window grill made up of 19mmx5mm size flat with hinge, Aldrop and locking arrangement painted with two coats red oxide paint all complete.( @ 6kg / sqft ) |
| 22 | A-21).Supplying all materials labour T&P Painting two coats with approved paint over a coat of primer on MS Door and window including cost of paint and primer etc all complete |
| 23 | A-22).Supplying all labour ,material T&P and writing multi colour,text/Pictorial message/information as prescribed by the department on the plastered surface with approved colour shade and size etc. complete as per the direction of the Engineer-in-charge (On the external wall of Pump house of size 10\"X 5\") |
| 24 | B.) CONSTRUCTION OF COMPOUND WALL (40mtr)1.) Earth work in excavation in foundation in hard soil with in the initial lead lift including dressing and levelling the bed and depositing the excavated materials away from the work site etc. all complete as directed by the Engineer-in-charge |
| 25 | B-2). Supplying all labour T&P materials for filling foundation with sand, well watered and rammed with cost ,conveyance & royalty of the materials etcall complete as directed by the Engineer-in-charge |
| 26 | B-3).Supplying all materials, labour, T&P and providing C.C.(1:4:8) with 4cm size HG crusher broken metal including all cost,carrige royalty,taxes,and all labour involved for completion of item of work as directed by the Engineer-in-charge |
| 27 | B-4).Supplying, all labour T&P materials providing cement concrete (1:1.5:3) for RCC work using 20mm size HG crusher broken chips including all cost of materials.labour,& conveyance charges with watering,curing for the required period etc complete and providing required quantity of centering and shutterings including false works and dismentaling them after casting as perdirection of Engineer-in-charge of the departmet.a) Foundation for Column & Plinth Beam |
| 28 | B-4b) Column & Beam |
| 29 | B-5). Labour for MS reinforcement for RCC work including cutting,bending,binding,binding and tying the grills and placing in osition including cost of binding wire 18 to 20 gauge and conveyance of MS rod etc. all complete. |
| 30 | B-6). Supplying all materials, labour, T&P and providing Brick work with Fly ash Bricks in cement mortar (1:6) insuper structure using fly ash bricks of size 23cnx 11cmx 8cm including cost, conveyance,royalty of all materials as per specifications and direction of Engineer-in-charge |
| 31 | B-7). Supplying all labour, T&P, materials for refilling the sides of the foundation with excavated materials including watering and ramming/compacting etc. complete as directed by the Engineer-in-charge |
| 32 | B-8). Providing 12mm thick cement plaster (1:6) over brick masonry walls including all cost of the materials,carrige,royalty,all taxes and all labour involvede for completionnof item of work as per the direction of Engineer-in-cgarge. |
| 33 | B-9). Supplying all materials labour T&P and finishing wall with two coats of weather coat painti of approved shade to give an even shade including the cost of paint,brush etc. complete as per the direction of the Engineer-in-charge |
| 34 | B-10). Supplying,transporting,fitting and fixing of MS Grill, as per the approved design, in the hinges already provided in the gate pillers,etc,all complete, as per the direction of the Engineer-in-charge.(to be paid as per actual weight) |
| 35 | C.)DEVELOPMENT OF SITE1). Supplying all materials, labour, T&P for Filling earth inside Head works site including watering, ramming with cost, carriage & royality of materials etc. all complete as per direction of Engineer-in-charge. |
| 36 | D.)INTERNAL ELECTRIFICATION Recessed wiring to light point / Exhaust fan point with 1.5 sqmm F.R. PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metalic PVC flexibleconduct with 5Amp, 250V piano type switch ISI marked and celling rose ISI marked mounted on MS box having front backelite cover of suitable size M.S. Box with 1.0 sqmm F.R. PVC insulated single core multistrand copper conductor and earth wire including all accessories and connected as per direction of engineer-in-charge ( Make of wire = Finolex / L&T / Anchore / Havels / V Guard ) ( Deducting the cost of S/F 100mm x 60mm M.S. Box with backlite cover - 1 no )a) - do - Group A ( 1.1.1 - 1.24.2 ) up to 3 M |
| 37 | D-1b)- do - Group A ( 1.1.1 - 1.24.2 ) 4 M - 5 M |
| 38 | D-1c)- do - Group A ( 1.1.1 - 1.24.2 ) 5 M and above |
| 39 | D-2). Recessed wiring to Fan point in - do - b) - do - Group A ( 1.1.1 - 1.24.2 ) 4 M - 5 M |
| 40 | D-3). Supply and fixing of 16/ 18 SWG metal box of following sizes ( Normal size ) in recess with suitable size of phenolic laminated sheet cover in front including cutting the wall and making good the same in case of recesed conduct as required.a.) 100mm x 100mm x 60mm deep ( 1.24.2 ) |
| 41 | D-3b).180mm x 100mm x 60mm deep ( 1.24.5 ) |
| 42 | D-3C). 200mm x 250mm x 75mm deep ( 1.24.9 ) |
| 43 | D-4). Supply and fixing of 5 Amp Switch and 5Amp Socket outlet of ISI marked on existing board ( 1.25.1 + 1.25.4 ) |
| 44 | D-5). Supplying, providing all materials and labour T&P 3 Phase pilot lamp, with 3nos holder, switch, bulb on Iron Board front Bakelite sheet cover complete fitting. |
| 45 | D-6). S/F to 180 mm x 100 mm x 60mmdeep (Normal size ) in recess with suitable size of phenoliclaminated sheet coverin front includingproviding and fixing 3 pin15 /16 Amp. Socket outlet 15/16 Amp. Piano type switch, connection, painting etc.as required (1.27) |
| 46 | D-7). Wiring of circuit/ sub-main along with earth wire with following sizes of pvc insulated single core multistrand copper conductor with ISI marked coforming to IS-694 / 1990 in 20mm dia non metalic heavy duty flexible conduct 1.6 mm in recessed PVC conduct as required ( Make of wire = Finolex / L&T / Anchore / Havels / V Guard )a) 2 x 1.5 sqmm + 1 x 1.0 sqmm ( 18.1 ) |
| 47 | D-7 b) 2 x 2.5 sqmm + 1 x 1.5 sqmm ( 18.2 ) |
| 48 | D-7c) 2 x 4 sqmm + 1 x 1.5 sqmm ( 18.3 ) |
| 49 | D-7 d) 2 x 6 sqmm + 1 x 2.5 sqmm |
| 50 | D-8). Supplying, providing, fitting and fixing 100AMP Copper cable socket with ranga soldering. |
| 51 | D-9). Supply, installation, testing and commissioning of 100 AMP Porcelain kitkat fuse on M.S. Board with M.S. Clamp by drilling holes with other fixing materials complete with fuse links interconnections earting etc. as required as per direction of EIC.( MakeAnchor / L&T / Havels ) |
| 52 | D-10). Supply, installation, testing and commissioning of 32 AMP TPN main switch ( IS 13940 Part 3/1993 ) on existing surface complete with fuse links interconnections earting etc. as required as per direction of EIC. ( Make Simens / HPL / Anchor / L&T / Havels / C&S / RK ) 2.15.2 |
| 53 | D-11). Supply, installation, testing and commissioning of 63 AMP TPN main switch ( Sl.no. 1505, IS 13940 Part 3/1993 ) on existing surface complete with fuse links interconnections earting etc. as required as per direction of EIC. ( Make Simens / HPL / Anchor / L&T / Havels / C&S / RK ) 2.15.2 |
| 54 | D-12). Supplying and fixing of batten holder of ISI marked including connection etc. instead of ceiling rose ( 1.29 - 1.28 ) |
| 55 | D-13). Earthing with G.I. earth pipe 3 meter long 40mm dia ISI marked including acessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required. ( 3.2 ) |
| 56 | D-14). Providing & fixing 6 no SWG G.I. wire in recess for loop earthing as required ( 3.17 ) |
| 57 | D-15). Supply and fixing A/C Ceiling Fan with all acessories and connections without regulator ( MakeHavels - celocity Sparks / Khaitan-maganet / Orient - New breeze / Anchor- Rayal gold / Crompton Greaves -High breeze ) a.) 48\" ( 1200mm) |
| 58 | D-16). Supply and fixing of strip fitting with colour end plate for 1 X 28 W T 5 tube with electronic ballast including tube ( Make PAC / Bajaj / Philips ( Type - STC - 128 HFE )) |
| 59 | D-17). Supply, installation, testing and commissioning of 24 watt Energy effcient T-5 street light fitting incl. fixing of 24 watt T-5 Lamps ( Make Bajaj / Havels ) including fixing of bracket and all accessories as per direction of EIC.a.) 2 X 24 watt Lamp |
| 60 | D-18). Supply and fixing of electfic step type ceiling fan regulator in existing switch box including connection with 1.5 sqmm FR PVC insulated single core multistrand copper conductor with earthing the regulator as required ( 1.38 ) |
| 61 | D-19). Supply, installation, testing and commissioning of CFL Bulba.) 18 watt CFL Bulb |
| 62 | D-19 b.) 11 watt CFL Bulb |
| 63 | D-20). Supplying and fixing of 63 AMP TPN Copper Bus Bar |
| 64 | E-1.) SUPPLY AND INSTALLATION OF PUMP & MOTOR1). Supplying, of 5.0 HP Three Phase Vertical Submersible Pump set including 100% standby.Head - 58 mtr, Discharge -168 LPM ( Model- GP 185015 ) |
| 65 | E-2). Supplying, of 5.0 HP Three Phase Horizontal Submersible Pump set including 100% standby.Head - 58 mtr, Discharge -168 LPM ( Model- GP 185015 |
| 66 | E-3)Control Pannel suitable for 5 HP Submersible Pumpset consisting of main fuse contactor ( Cosmic star- delux Automatic Star Delta/ BCH ) Volt meter, Amp meter, Selector Switch, On/Off switch, Single Phase preventor, Overload relay, Phase Indicator etc. enclosed in a metal box. |
| 67 | E-4)Supply of 4.0mm2 x 3 core Submersible Flat cable EPM (2318(200)/DT-19.03.2020 (M/S Jharana industries pvt. Ltd.) |
| 68 | E-5)Supply of 25Sqmm 31/2 core Aluminium Armoured cable (Nicco make ) |
| 69 | E-6) Supply of 1000 x2000mm Shock Proof Rubber mat having thickness 13mm capable of withstanding 5W.V. confirming to its specification ( 10kg ) |
| 70 | E-7). Supplying of all labour, T&P and installation of 5HP submersible pump set including lowering of column pipe with supply of Nut Bolt, rubber insertion sheet, installation of control pannel board, laying of flat cable & armed cable through suitable casing pipe including earth work and cost of all materials etc. all complete. |
| 71 | F.-) MS/GI ANDCOLUMN PIPES1).Supplying all materials,labour, T & P welding rod gas etc.fabrication and fitting fixing of following sizes, MS / GI pipes making of flanges drilling of bolt holes as per I,S, specification, The minimum thickness of barrel is 6 mm and flanges thickness is 20 mm. The pipes and specials are to be laid to proper gradient level and welding fittings at site etc. complete as per the direction of E.I.C.Suction Pipe to the submersible pumpI) 80mm flanged G.I. column pipe |
| 72 | F-1.)100 mm G.I. pipe from pump to UGR with cost of all Specials required |
| 73 | F-2.)8\" M.S. Board Cover |
| 74 | F-3.)2 1/2\" G.I. Clamp ( for 5.0 HP three phase Submersible Pump ) |
| 75 | F-4.)15mm Pressure Gauge |
| 76 | F-5.)100mm DI NRValve (P.N 1.6) |
| 77 | F-6)100mm DI Sluice Valve (PN-1.0) |
| 78 | G.) TREATMENT UNIT1.) Providing chlorination arrangement with chlorinator of required capacity including cost of all materials, pipes, fittings, valves etc. including cost of installation etc. all complete. |
| 79 | H.) Construction of 100,000 ltr. Capacity U.G.RConstruction of one nos ofRCC UGR with required capacities for storage including making the provision of inlet and outlet connection,all cost of material,labour,T&P,Taxes,scaffolding,painting,testing,commisoning etc complete as per specification and direction of engg in charge. |
| 80 | I.)RISING MAIN1.) Supplying all labour T&P materials for earth work in excavation of foundation in all kinds of soil (ordinary, Hard and slushy soil) including fine dressing and leveling the bed with in initial lead of 50 mtr and initial lift of 1.50 mtr etc all complete as per the direction of EIC. ( excavation of earth to be done 0.90 mtr above the dia of pipe and 0.30mtr wider than the dia of pipe) |
| 81 | I-2). Supplying all labor, T & P for laying of HDPE Pipe including supply of jointing materials etc all complete including cost of HDPE Pipe.a) 110mm HDPE Pipes |
| 82 | I-3). Supplying all labour T&P materials and refilling the pipe line trench with excavated materials including watering and rammingall complete as per the direction of EIC. |
| 83 | J.) 1. Construction of Display BoardSupplying of all labour, T&P and materials for earthwork in excavation of all kinds of soil within initial lead of 50.0m. And 1.5m initial lift including rough dressing and levelling the bed with all labour, T & p etc. complete as directed by the Engineer-in-Charge. |
| 84 | J-2)Filling in foundation and plinth with sand well watered, rammed etc including all cost conveyance royalty, labour and T & P etc complete as directed by the Engineer-in-Charge. |
| 85 | J-3)Supplying all labour, T & P and materials for cement concrete (1:4:8) using 4cm size hard granite crusher broken metal with all cost conveyance , royalty, taxes etc all complete. |
| 86 | J-4)Supplying all labour, T & P and materials for brick work with Fly ash. bricks having crushing strength between 100kg/cm2 to 149 kg/cm2 in cement mortar (1:6) in F/P including cost conveyance, royalty and taxes of all materials and labour etc as per the direction of the Engineer-in-Charge. |
| 87 | J-5)Supplying all labour, T&P and materials for 12mm thick cement plaster (1:6) for brick work including curing etc. complete. |
| 88 | J-6)Supplying all labour, T&P and materials for painting and writing in display board. |
