Water Corporation of Odisha-WATCO has published Tender For Construction Of Stabilization Pond And Intake Well At Rokat Stp For Treatment Of Drainage Water Of Gangua Nala Under Sewerage District-Vi, Bhubaneswar. Submission Date for this Tender is 07-09-2023. Lake Development Tenders in bhubaneswar Odisha. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Earth work in oridinary soil within 50m, initial lead and 1.5m, initial lift including rought dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-charge |
| 2 | Supplying and filling of sand to the foundation bed of column pit, wall foundation and inside the filling with wellwatered and rammed etc., and complete as per the direction of E.I.C. |
| 3 | Cement concrete (1:3:6) with 4cm. Size crusher broken hard Granite metal including cost of all labour, materials with all taxes, lead,T & P etc all complete . |
| 4 | Laying (to level or slopes)conforming to IS 783-1959 and jointing with cement mortar 1:2 of concrete pipes Class NP-2, reinforced light duty non-pressure pipes conforming to IS:458 - 2003 with collars and butt ends prepared for collar joints of the following internal diameter as per specification complete.(Earthwork in trenches to be measured and paid for separately). including cost of pipe |
| 5 | RCC encasing of RCC pipe-3sides with Cement concrete (1:11/2:3) with 12mm.size crusher broken hard Granite chips for R.C.C.work including hoisting & laying with cost of all labour, materials with all taxes, lead ,T & P etc all complete . |
| 6 | Steel for RCC wakk |
| 7 | Smooth centering & shuttering for RCC works |
| 8 | Inlet Channel |
| 9 | Earth work in oridinary soil within 50m, initial lead and 1.5m, initial lift including rought dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-charge |
| 10 | Supplying and filling of sand to the foundation bed of column pit, wall foundation and inside the filling with wellwatered and rammed etc., and complete as per the direction of E.I.C. |
| 11 | Supplying, all labour T&P materials providingPCC at bottom(1:3:6) with 40mm CB H.G.metals including cost, conveyance and royalty of materials etc all complete as per direction of Engineer-in-charge of the |
| 12 | Rough stone dry packing in approns and revetments with hard granite stones (15cm to 30cm) |
| 13 | CONSTRUCTION OFSCREEN CHAMBER of Inside size- 2 no (1 x2.6mtr) |
| 14 | Earth work in oridinary soil within 50m, initial lead and 1.5m, initial lift including rought dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-charge |
| 15 | Supplying, all labour T&P for filling in foundation and plinth with sand watered and rammed with all cost, conveyance and royalities etc all complete as per direction of Engineer-in-charge of the departmet. |
| 16 | Supplying, all labour T&P materials providing cement conctere(1:4:8) with 40mm CB H.G.metals including cost, conveyance and royalty of materials etc all complete as per direction of Engineer-in-charge of the departmet. |
| 17 | Supplying, all labour T&P materials providing 1:1.5:3 for RCC work using 12mm and down graded size HG chips including hosting & laying cost, conveyance and royalty of materials etc all complete as per direction of Engineer-in-charge of the departmet. |
| 18 | Supplying, all labour T&P materials for 6mm thick cement plaster (1:4) to RCC surfaces finished smooth including closed deep chiping and slury treatment etc all complete as per direction of Engineer-in-charge of the departmet. |
| 19 | Supplying, all labour T&P materials forcutting, bending binding & straightening & tying the grill and placing in position including cost of HYSD reinforcement bar and binding wire 18 to 20 gauge etc all complete as per direction of Engineer-in-charge of the departmet. |
| 20 | Supplying, all labour T&P rigid & smooth centering & shuttering for RCC works including false work & dismentaling then after casting including cost of materials complete in ground floor as per direction of Engineer-in-charge of the departmet. Walls & fins |
| 21 | Supply & installation testing commisioning of Mechanical step type screen equipment of(1W + 1S)Mechanical Step Screen Fine Height: 4500mm Width:1000mm Material: SS 304 Bar Spacing:10mm Hydraulic Power Pack Motor: 3hp, 1440 RPM Hydraulic Cylinder 100 bar Direction Control Valve Hose Pipe 2 Pcs with automatic screw Conveyor for the above width including dismentalling new civil work neccesary fixing for M/S gate, dewatering towards fixing screen including cost of all materials ,labour, T&P etc all complete. |
| 22 | Cast Iron CI Sluice Gate, For Sewage/ Waste Water / Effluent penstock gate (.8m X 1.4m) |
| 23 | Inlet well |
| 24 | Earth work in oridinary soil within 50m, initial lead and 1.5m, initial lift including rought dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-charge |
| 25 | 1st depth of 1.5mtr |
| 26 | 2nd depth of 1.5mtr |
| 27 | 3rd depth of 1.5mtr |
| 28 | Earth work in slushy soil (in water upto 0.6m depth requiring the aid of pans and vessels) within 50m. Initial lead and 1.5m initial lift as per the direction and specification of the Deparment and as per thedirection of EIC. ( Data for Per 100 Cum including cess on labour 1% ) |
| 29 | 4th depth of 1.5mtr |
| 30 | 5th depth of 1.5mtr |
| 31 | Excavation of founation in hard rock (granite) removed by chiselling including dressing and levelling the bed not exceeding 1.5m in depth and depositing the soil within initial lead of 50m and as per specification approved by the Department |
| 32 | 6th depth of 1.5mtr |
| 33 | 7th depth of 1.5mtr |
| 34 | Supplying and filling of sand to the foundation bed of column pit, wall foundation and inside the filling with wellwatered and rammed etc., and complete as per the direction of E.I.C. |
| 35 | Supplying, all labour T&P materials providingPCC at bottom(1:3:6) with 40mm CB H.G.metals including cost, conveyance and royalty of materials etc all complete as per direction of Engineer-in-charge of the |
| 36 | Shoring and shuttering of foundation trench, pit etc with close wooden planks or sheets shuttering etc excluding cost of planks and sheet |
| 37 | Wall for 7mtr height |
| 38 | R.C.C. work of M-25 grade with 20mm and down grade crosser broken hard granite stone chips including hoisting and laying including cost, conveyance, royalities and taxes of materials, labour, T&P, required for the work etc. all complete as perdirection of E.I.C. |
| 39 | WALL |
| 40 | 1st depth of 1.5mtr |
| 41 | 2nd depth of 1.5mtr |
| 42 | 3rd depth of 1.5mtr |
| 43 | 4th depth of 1.5mtr |
| 44 | 5th depth of 1.5mtr |
| 45 | 6th depth of 1.5mtr |
| 46 | 7th depth of 1.5mtr |
| 47 | raft |
| 48 | SLAB |
| 49 | Supplying all materials, labour, T&P and providing Labour for MS reinforcement for RCC work including cutting bending, binding and tying the grills & placing in position including cost of binding wire 18 to 20 gauge. and carriage of the MS Rod Per 1Qntl. |
| 50 | 1st depth of 1.5mtr |
| 51 | 2nd depth of 1.5mtr |
| 52 | 3rd depth of 1.5mtr |
| 53 | 4th depth of 1.5mtr |
| 54 | 5th depth of 1.5mtr |
| 55 | 6th depth of 1.5mtr |
| 56 | 7th depth of 1.5mtr |
| 57 | SLAB |
| 58 | Smooth Centering and shuttering for RCC work including cost carriage royalty of all materials and dismentalling them after casting etc all complete |
| 59 | 1st depth of 1.5mtr |
| 60 | 1st depth of 1.5mtr |
| 61 | 2nd depth of 1.5mtr |
| 62 | 2nd depth of 1.5mtr |
| 63 | 3rd depth of 1.5mtr |
| 64 | 3rd depth of 1.5mtr |
| 65 | 4th depth of 1.5mtr |
| 66 | 4th depth of 1.5mtr |
| 67 | 5th depth of 1.5mtr |
| 68 | 5th depth of 1.5mtr |
| 69 | 6th depth of 1.5mtr |
| 70 | 6th depth of 1.5mtr |
| 71 | 7th depth of 1.5mtr |
| 72 | 7th depth of 1.5mtr |
| 73 | Slab |
| 74 | SS laddar |
| 75 | 2.5 mm thick Chequers plate-3mX1.5m |
| 76 | supplying all labour materials and t& P for fitting and fixing of indef P 5 Chain pulley block capacitoes 5 Ton of reputed make all complete. |
| 77 | transportation |
| 78 | Dewatering |
| 79 | INTERNAL ELECTRIFICATION |
| 80 | Recessed wiring to light point / Exhaust fan point with 1.5 sqmm F.R. PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metalic PVC flexibleconduct with 5Amp, 250V piano type switch ISI marked and celling rose ISI marked mounted on MS box having front backelite cover of suitable size M.S. Box with 1.0 sqmm F.R. PVC insulated single core multistrand copper conductor and earth wire including all accessories and connected as per direction of engineer-in-charge ( Make of wire = Finolex / L&T / Anchore / Havels / V Guard ) ( Deducting the cost of S/F 100mm x 60mm M.S. Box with backlite cover - 1 no ) |
| 81 | Group A ( 1.1.1 - 1.24.2 ) up to 3 M |
| 82 | Group A ( 1.1.1 - 1.24.2 ) 4 M - 5 M |
| 83 | Group A ( 1.1.1 - 1.24.2 ) 3 M - 4 M |
| 84 | Recessed wiring to Fan point in - do - |
| 85 | Group A ( 1.1.1 - 1.24.2 ) up to 3 M |
| 86 | Group A ( 1.1.1 - 1.24.2 ) 4 M - 5 M |
| 87 | Group A ( 1.1.1 - 1.24.2 ) 3 M - 4 M |
| 88 | Recessed wiring to Cell Bell Point in |
| 89 | Group A( 1.1.1 - 1.24.2 ) |
| 90 | Group B (1.1.2-1.24.2 ) |
| 91 | Group C ( 1.1.3.- 1.24.2 ) |
| 92 | Supply and fixing of 16/ 18 SWG metal box of following sizes ( Normal size ) in recess with suitable size of phenolic laminated sheet cover in front including cutting the wall and making good the same in case of recesed conduct as required. |
| 93 | 100mm x 100mm x 60mm deep ( 1.24.2 ) |
| 94 | 180mm x 100mm x 60mm deep ( 1.24.5 ) |
| 95 | 200mm x 250mm x 75mm deep ( 1.24.9 ) |
| 96 | Supply and fixing of 5 Amp Switch and 5Amp Socket outlet of ISI marked on existing board ( 1.25.1 + 1.25.4 ) |
| 97 | Supplying, providing all materials and labour T&P 3 Phase pilot lamp, with 3nos holder, switch, bulb on Iron Board front Bakelite sheet cover complete fitting. |
| 98 | S/F to 180 mm x 100 mm x 60mmdeep (Normal size ) in recess with suitable size of phenoliclaminated sheet coverin front includingproviding and fixing 3 pin15 /16 Amp. Socket outlet 15/16 Amp. Piano type switch, connection, painting etc.as required (1.27) |
| 99 | Wiring of circuit/ sub-main along with earth wire with following sizes of pvc insulated single core multistrand copper conductor with ISI marked coforming to IS-694 / 1990 in 20mm dia non metalic heavy duty flexible conduct 1.6 mm in recessed PVC conduct as required ( Make of wire = Finolex / L&T / Anchore / Havels / V Guard ) |
| 100 | 2 x 1.5 sqmm + 1 x 1.0 sqmm ( 18.1 ) |
| 101 | 2 x 2.5 sqmm + 1 x 1.5 sqmm ( 18.2 ) |
| 102 | 2 x 4 sqmm + 1 x 1.5 sqmm ( 18.3 ) |
| 103 | 2 x 6 sqmm + 1 x 2.5 sqmm |
| 104 | Supplying, providing, fitting and fixing 100AMP Copper cable socket with ranga soldering. |
| 105 | Supply, installation, testing and commissioning of 100 AMP Porcelain kitkat fuse on M.S. Board with M.S. Clamp by drilling holes with other fixing materials complete with fuse links interconnections earting etc. as required as per direction of EIC.( MakeAnchor / L&T / Havels ) |
| 106 | Supply, installation, testing and commissioning of 32 AMP TPN main switch ( IS 13940 Part 3/1993 ) on existing surface complete with fuse links interconnections earting etc. as required as per direction of EIC. ( Make Simens / HPL / Anchor / L&T / Havels / C&S / RK ) 2.15.2 |
| 107 | Supply, installation, testing and commissioning of 63 AMP TPN main switch ( Sl.no. 1505, IS 13940 Part 3/1993 ) on existing surface complete with fuse links interconnections earting etc. as required as per direction of EIC. ( Make Simens / HPL / Anchor / L&T / Havels / C&S / RK ) 2.15.2 |
| 108 | Supplying and fixing of batten holder of ISI marked including connection etc. instead of ceiling rose ( 1.29 - 1.28 ) |
| 109 | Earthing with G.I. earth pipe 3 meter long 40mm dia ISI marked including acessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required. ( 3.2 ) |
| 110 | Providing & fixing 6 no SWG G.I. wire in recess for loop earthing as required ( 3.17 ) |
| 111 | Supply and fixing A/C Ceiling Fan with all acessories and connections without regulator ( MakeHavels - celocity Sparks / Khaitan-maganet / Orient - New breeze / Anchor- Rayal gold / Crompton Greaves -High breeze ) |
| 112 | 48" ( 1200mm) |
| 113 | Supply and fixing of strip fitting with colour end plate for 1 X 28 W T 5 tube with electronic ballast including tube ( Make PAC / Bajaj / Philips ( Type - STC - 128 HFE )) |
| 114 | Supply, installation, testing and commissioning of 24 watt Energy effcient T-5 street light fitting incl. fixing of 24 watt T-5 Lamps ( Make Bajaj / Havels ) including fixing of bracket and all accessories as per direction of EIC. |
| 115 | 2 X 24 watt Lamp |
| 116 | Supply and fixing of electfic step type ceiling fan regulator in existing switch box including connection with 1.5 sqmm FR PVC insulated single core multistrand copper conductor with earthing the regulator as required ( 1.38 ) |
| 117 | Supply, installation, testing and commissioning of CFL Bulb |
| 118 | 18 watt CFL Bulb |
| 119 | 11 watt CFL Bulb |
| 120 | Supplying and fixing of 63 AMP TPN Copper Bus Bar |
| 121 | Procurement, supplying,installation of suitable size cablewith all accessories including installation, testing and commissioning etc. all completeLT Power Cables - Copperarmoured Conductor cable size 50 sqmm 3.5 core |
| 122 | Supply, Installation, Testing Wiring & Commissioning main electrical panel with all arrangementsfor Group-I & II, Made out of 2MM C.R sheet, Duely Powder coated, Floor mounted, Front operated, complete with Rated Alluminium BusBar and interconnection with copper wire and lugs , AUxilary contactor 2NO+2NC -4 NOs, 2No+2NC Addon block- 4Nos,. Start/stop/reset push Buttom- 1Set, ON/OFF/Trip Indictor - 1set, Cooling Fan with filter -1nos,10 mm Power Terminal-4 Nos, 2.5mm Control Terminal -10 Nos,All switchgear and controlgear make- Siemens,schneider,ABB,L&T,LEGRAND. All completed asper electrical specification and as per direction of EIC. |
| 123 | YARD LIGTHING |
| 124 | Cable junction boxes IP66/69 weather proof for outdoor installation of size 104mm x 104mm x 70 mm (with knockouts for cable entry - Black colour) Preferable Hensel make Cat No. KF 0404B) |
| 125 | Connector suitable for 4sqmm For yard lighting |
| 126 | 2.50 Sqmm 4 core copper armoured Cable including laying |
| 127 | Supply fitting & fixing of energy saving & envoirnmental friendly long life pressure die cast housing with toughened glass& with option of secondary optic with IP66 protection 45 Wt LED light .(Preferable HALONIXmake Freedom LUNOS - SUPER l Cat No.HLSLD-15-45-CWL-R) |
| 128 | Supply fitting & fixing of following materials for Yard Lightingarrangementetc complete.. |
| 129 | 19 mmService Cable Gland |
| 130 | 2.5 mm copper cablesocket |
| 131 | S/F of 1x60W 5700K LED street light made up of pressure die cast housing with toughned glassindividual high powered LEDs with secondary optics ,IP66 protectionHavells make(Endura Pearl Plus) with connectionas per the direction of Engineer-in-Charge. |
| 132 | S/F of1x150W 5700K LED Floodlight made up of pressure die cast housing with toughned glassindividual high powered LEDs with secondary optics ,IP66 protectionHavells makeJETA IRIS )/Crompton PLUTOincluding all accessories,G.Ibracket and connection. as per the direction of Engineer-in-Charge. |
| 133 | Supply fitting fixing & errection of Hot dip octagonal smart pole for mounting and installation of the LED street light Luminaries as per following technical specifications - (i) Height - 6.00 mtr (ii) Top dis - 70 mm (iii) Bottom dia -130mm (iv) Sheet thichness - 3 mm (v) Base plate dimension - 200 mm x 200mm x 12mm with required bolt & fittings |
| 134 | Supplying fitting & fixing of Single arm Bracket of 1.0 mtr lengthsuitable for fixing in 70mm top yard lighting octagonal smart pole |
| 135 | EXTERNAL ELECTRIFICATION |
| 136 | 3 phase transformer including installation with all required material100 KVA as per engineer in charge |
| 137 | LT Line with 95 mm: AB Cable usine 9 1 RM PSC Pole |
| 138 | construction of line DP with AB switch arrangement |
| 139 | Areated Pond |
| 140 | Excavation for roadwork in soil with hydraulic excavator of 0.9cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the emb. |
| 141 | Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2. |
| 142 | Soil transportion from other place with lead of 10 km for construction of embankment with compacting and watering upto omc rolling earth work with P.R.R in layers notexceeding 0.23 mtr by power road roller including hire and running charges of roller. |
| 143 | Morrum |
| 144 | Providing andlaying granular sub-base for moorum shoulder satisfying P.I.value within 6 in layers not exceeding 22.5Cm watering and compacting to the required density atO.M.C condition by PRRwith cost ,conveyance,royalities,taxes etc |
| 145 | Fine dressing & turfing to the slope ofembacment with compact turf grass transporting to site by mechanical means with in 5 km lead |
| 146 | Rough stone dry packing in approns and revetments with hard granite stones ( 30cm and above size) |
| 147 | Cut off Wall |
| 148 | Sand filling in Road work & foundation of structure as per approved Drawing & Technical Specifications and as per Section - 2100 ofMoSRT&H Specifications for Road & Bridge works (Latest Revision). |
| 149 | PCC(1:3:6)with 40mm crusher brokn granite chips in foundation bed using 40mm to 10mm size crushed stone aggregates mixed by concrete mixer, laying in layers and compacting by vibrator & all leads and lifts as per approved Drawing & Technical Specifications and as per Section - 1700 & 2100 ofMoSRT&H Specifications for Road & Bridge works (Latest Revision). |
| 150 | R.C.C. M-25 grade inRaft of retaining wall as per approved Drawing & Technical Specifications and as per Section -1500, 1700 & 2100 ofMoRT&H Specifications for Road & Bridge works (Latest Revision). |
| 151 | R.C.C. M-25 grade in retaining wall as per approved Drawing & Technical Specifications and as per Section -1500, 1700 & 2200 of Specifications for Road & Bridge works (Latest Revision). |
| 152 | Steel reinforcement works using HYSD as per approved Drawing & Technical Specifications and as per Section -1600 ofMoSRT&H Specifications for Road & Bridge works (Latest Revision). |
| 153 | Rigid smooth centering and shuttering for RCC works including false work and dismantling then after casting including cost materials all complete. |
| 154 | RCC M-25 in Foundation Raft |
| 155 | RCC M-25 in Substructure |
| 156 | Automenation |
| 157 | Supply of electric powered electromagnetic full bore type IP 68 fully welded Flanged type water flow meter of Pulse DC type of Flow tube SS304, coil housing & electrodes SS316, SS ring type grounding etc with IP 68 signal converter remote mounting,input power supply 24V DC 4 - 20 mA,programable LCD display to show Actual flow rate, totalised flow, flow direction, flow velocity,conductivity with + or - 0.5 % accuracy etc & provision to diagnostics empty pipe detection, coil temperature, coil resistance etc & compatable to data communication modules with masibus & communication the data to remote SCADA station for live monitoring where ever required including providing data cable & power cablerequired as per site condition .The standard calibration certificate & guarantee certificate for flow meter & electromagnetic signal converter to be given for minimum one year from the date of installation.The Approved Make : (ABB,Krone,Immersion,Bermad,E & H)including cost of material with all taxes transporataion to Site/Storage with insurance. |
| 158 | 350mm dia Flow meter |
| 159 | Installation charges |
| 160 | 350mm dia Flow meter |
| 161 | Supplying all labour and T&P for fixing DI Resilient Seated Glandless Gate Valve of RATING PN - 1.60(IS 14846/2000) with double flanged ends (with wheel) Rating PN-1 (IS:14846/2000) for water works purpose for the following rating & nominal diameters but (including cost of Sluice Valves) (Vag/Talis/Kirloskar/AVK) |
| 162 | 350mm dia D/F Sluice Valve (PN1.6) Vag/Tallis make |
| 163 | Supplying all materials, labour, and T&P for providing mechanical joints to flange socket as per relevant IS with suitable flanged joints and fitting & fixing of following in pipeas per specifications including testing with cost of all jointing materials, transportation to site etc. all completeas per the specifications and directions of Engineer-in-charge. |
| 164 | 350mm dia MJ Socket For Installation of Flow meter |
| 165 | HDPE PIPE: Supply and Laying of 40MM(8Kg/cm2)dia HDPE pipe (Make: Supreme/equvalent) in cable trench as per specification and directions of Site Engineer / Engineer-in-Charge.(excluding earth work) |
| 166 | Supply , installation, testing and commissioning of the 82.5KVA Silent DG set consisting of Electronic Governor with Engine VOLVE/ CATERPILLAR/CUMMINS/MTU/TATA MAKE & Alternator of STAMFORD/ MECCALTE/ LEROYSOMER make. The installation include following works such as: 1) Required earth Work Excavation in all kinds of soil. 2) C:C. 1:3:6 with sand filling (100mm thickness) 3) (1:1 1/2:3) RCC should have volume of 3 cums. 4) Earthing 2nos. of 1.5x1.5X2.5 with necessary betonite mud filling good earth Charcoal & common salt with a laver of 700mm each including 2nos. of earth Electroed including its PVC/RCC Cap |
| 167 | Supply, installation, comissioning and tesing of 1 no LT synchronization panel (Synchronization is the process of running two or more DG sets in parallel on common bursar, while matching the characteristics of each system as closely as possible. Without failure of power supply, maintenance of dg set can be done. As per load condition required no. of dg sets can be operated) for 1 set 82.5 KVA DG sets |
| 168 | Supply,Installation & Commissioning of SCADA software (Make-Schiender/Simens) with Graphical processor visualisation Advanced alaram management,historical and Real time trending,Built-in-reporting,Stastical process control,Multithreaded citect VBA and Cicode programming language with 2048 Tag SCADA Software (ES+OS) (Make- Schneider, Siemens),1KVa online Ups with 30Min batery backup- 1Nos,CPU Having Preloaded win-10 Proffessional, I3-10gen 2.4 Ghz Prrocessor, DDR4 8gb Ram, 500 gb 7200 Rpm HDD-1 Nos ( Make- HP,DELL,LENOVO),USB based keyboard - 1Nos,USB based Optical Mouse- 1Nos,43"" LED monitor - 1Nos,A4 size laserPrinter - 1Nos,Wooden Computer table - 1 Nos ,Preparation of P&I diagram, Creation of Multi visualization screen for Process control,alarm managenent, Historical and realtime process trend, Daily reporting etc complete as per requirement & direction of Engineer - in - Charge (Including license key) |
| 169 | Supply,installation & commissioning of PLC Panel with following technical specification i,e. Enclosure: 800x800x2100mm-01 No with double door & lock, CPU should have 1 MB program memory with extended memory slut ,Redundand-24VDC,SMPS 10Amp along with 24V DC SPD,IO count as DI-16,DO-20,AI-20,AO-08 & MODBUS-10 subsystem shall be of same series as CPU,10" Panel Mounted HMI,Modem should have support MQTT Protocol by default, 24volt DC Industrial switch with minimum 6 eathernate, 4 SFP Port each AI shall be equiped with sutitable signal isolator of 20 Nos & surge protection device 20 nos LIU Isolater, 230Volt AC/230volt AC torroidal transformer,1KVA 230V AC industrial grade UPSof 8 hrs backup to charge 3 nos 12 VDC 65 AH Battery ,DP MCB of Adequate current capacity,LED tube light 10" 5 watt,door limit switch,Fan 6" with louver,4 sqmm straight through terminal & fuse terminal 90 nos ,with PE & EE.The Approved Make : (PLC- Siemens,Schnider,Phoenix,ABB,MitsubishiSMPS -Phoenix,Siemens,Schnider. Isolater-Masibus,Rishabh,Multispan. SPD-Phoenix,Mersen,DehnUPS-Vertive, Hitachi,High Rail,AVO, Eathernate switch-Siemense,Moxa,Phoenix) including cost of material with all taxes transporataion to Site/Storage with insurance.Programme to be handed over with upload & download facilities for departmental use. |
| 170 | Type 2-1 P+N 15KVA Surge protection device |
| 171 | Supply, Installation, Programming, Testing& Commissioningof1KVA Online UPS with 08Hr Battery Backup System, Having Double conversion IGBT based online UPS system with builtin Isolation Transformer, Input 150-250VAc 1Phase,50Hz, output: 230 VAC,1Phase,50Hz. Drytype 3 nos Battery 42AH with MS Rack . All completed asper electrical specification and as per direction of EIC. |
| 172 | Supplying all materials,labour,T&P, for fitting of PLC panel as per electrical specification |
| 173 | 2.5 sqmm 7 core armoured copper cable |
| 174 | CAT-6 Dlink cable |
| 175 | Cable Gland-25 mm |
| 176 | Cu.logs-1.5/2.5 |
| 177 | Supply, installation of chemical earthing withcrystalline conducting material for Back Fill Compound & installation of Maintenance Free Earthing Electrode with ISI mark G.I. Pipe dia 50mm as Secondary electrode with wall thickness of 2.6mm and the primary earthing electrode will be 25mm x 6mm hot dipped galvanized strip filled with a highly conductive & non-corrosive compound in between the primary earthing & the secondary earthing. A solid G.I. Base plate of 300 x 300 mm seals the unit at the bottom. Ground filling compound will be provided in 25kg per bag - 2nos. Excavation of earth pit refilling, Precast RCC chamber with lid etc. all completeas per the site requirement. |
| 178 | Gigabit SFP to RJ45 Fiber multi Media Converter | Fiber to Ethernet Converter | 10/100/1000Mbps RJ45 Port to 1000Base-LX Dual-Mode Fiber(Make - Dlink or equivalent) |
| 179 | 24 port fiber optic panel or light interface unit drawout Type |
| 180 | OFC Splicing with pigtails |
| 181 | Optical fiber 16-port managed L3 gigabit fiber switch and media coverter for non-blocking throughput switching, high performance and low latency, Gigabit Ethernet SFP and RJ45 ports (Make-CISCO or equivalent |
| 182 | supply & fixing of Quantity analyser with display unit in all complete form as per engineer in charge (BOD,COD, TSS, PH analyzer BD600) |
| 183 | PUMP & MOTOR |
| 184 | Supplying, of 20HP Three Phase sewerage submersible pump . Head - 10.00 mtr, Discharge -91 Lps |
| 185 | star delta Control Pannel with APFC arrangement suitable for20HP Submersible Pumpset consisting of main fuse contactor ( Cosmic star- delux Automatic Star Delta/ BCH ) Volt meter, Amp meter, Selector Switch, On/Off switch, Single Phase preventor, Overload relay, Phase Indicator etc. enclosed in a metal box. |
| 186 | Supply of 6.0 sq mm2 x 3 core Submersible Flat cable (Finolex make ) |
| 187 | Supplying of all labour, T&P and installation of 20 HP submersible pump set including lowering of column pipe with supply of Nut Bolt, rubber insertion sheet, installation of control pannel board, laying of flat cable & armed cable through suitable casing pipe including earth work and cost of all materials etc. all complete.(10% of pump cost) |
| 188 | INTER CONNECTION OF PIPE |
| 189 | Earth work in oridinary soil within 50m, initial lead and 1.5m, initial lift including rought dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-charge |
| 190 | Laying in trenches centrifugally cast (spun) Ductile Iron pressure socket and spigot pipes, class - K9 without cement mortar lining , conforming to IS:8329-2000 of the following nominal diameter as per specification, complete. |
| 191 | 600mm dia K-9 |
| 192 | 350mm dia K-9 |
| 193 | 250mm dia K-9 |
| 194 | Providing push-on-joints conforming to IS:3114-1994 to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes using Rubber Gaskets Conforming to I.S 5382 of S.B.R quality including cost of rubber gasket,testing of joints as per specification complete . |
| 195 | 600mm dia |
| 196 | 250mm dia |
| 197 | Suppluing fittinf,fixing& laying in trenches double socket ductile iron bends confirming to IS:1538(Part-X) as per specification all complete including cost of bend |
| 198 | 600mm dia |
| 199 | 250mm dia |
| 200 | Laying in trenches double socket Ductile Iron collars confirming to IS:1538 (Part-IX) as per specification all complete including cost of collar. |
| 201 | 600mm dia |
| 202 | 250 mm dia |
| 203 | Supplying all labour T&P materials, fitting and fixing of DI sluice valves/ NR valve with double flanged ends for water works purposes for the following rating and nominal diameter` including cost of nut bolt and rubber insertion transportation charges all complete as per specification and direction of EIC, including the cost of DI sluice valves / N.R. valves which will be supplied by the department. |
| 204 | 250 mm DI NR Valve(PN-1.6) |
| 205 | 250mm DI S/V Valve with wheel (PN-1.6) |
| 206 | 250 mm DI short piece pipe 2 mtr lenth with flange at both end |
| 207 | 350mm DI S/V Valve WITH WHEEL(PN-1.6) |
| 208 | 350mm DI dismentaling joint |
| 209 | 600X350mm DI Tapper |
| 210 | Supplying all labour T&P materials, and fixing of single NR valve for water works purposes for the following diameter, including drilling the water main including cost of valve and saddle complete as per specification and direction of EIC (Air valve & saddle will be supplied by the Deptt.) |
| 211 | 150mm dia D.itamperproof air valve |
| 212 | Chemical dosing system |
| 213 | Provision for supply testing and commissioning of chemical feed pump 0 to 100 in propertion to 4 to 20 mA signal.100 SPM@75Hz and 67 SPM @50Hz Motor frequency range=15 to 75 Hz Auto/manual, Remote,while running or at rest,5:1 Turn down ratio,Over and above there will be provision for manual stroke variation. The disch piping and fitting starting from the pump flange upto the tank nozzle including VFD 3 phase input and 415 volt 3 phase output and will have a rating of 3 HP. Inverter will receive a signal of 4 to 20 mA signal with electricinstallation etc. all complete Pump 1 Set= 2 Nos |
| 214 | Installation charges of chemical feed pump with storage tank & accessories including all piping arrangement and hire charges of Hydra etc all complete |
| 215 | Supplying of control panel with VFD for running of chlorine dosing pump and motor etc compatible with SCADA & PLC system etc all complete as per direction of Engineer-In-charge |
| 216 | PMCC ROOM |
| 217 | Construction design drawing of PMMC ,chemical house |
| 218 | GI RAILING |
| 219 | GI railing on the top of embankment with 3nos horizontal layer |
| 220 | CC Approach Road |
| 221 | Rolling and compacting to sub-grade or formation of loosening by cutting ordinary earth for 0.15 mtr. depth including watering and rolling by P.R.R as per specification and direction of engineer-in-charge. |
| 222 | Supplying and filling of sand to the foundation bed of column pit, wall foundation and inside the filling with wellwatered and rammed etc., and complete as per the direction of E.I.C. |
| 223 | P.C.C (1:3:6) using 40mm size black hard crusher broken metals with all cost, convency, royalty etc., and complete as per direction of E.I.C. |
| 224 | R.C.C work of M20 Grade with 20mm sizeand down graded crusher broken chips including cost, conveyance, royalty of all materials, cost of all labour T&P etc., Complete including centering shuttering and dismantled the centering material. |
| 225 | Rigid smooth centering and shuttering to C.C work Including all cost. |
| 226 | Providing and Laying Factory made Chamfered Edge Cement Concrete Paver Blocks of required strength,thickness & size/shape made by table Vibratory method, to attain superior smoth finish using PU or Equivalent moulds ,Laid in required gray colour and Pattern over 50mm thick Compacted bed of coarse sand, copmacting and proper embedding / laying of interlocking Paver Blocks into the sand bedding layer through vibratory compactionby using plate vibrator, Filling joints with Fine sand and cutting of Paver blocks as per required size/Pattern, finishing and sweeping extra sand in footpath , parks, lawns, drive ways, or light traffic parking andLanes/Road etc, all complete as per Manufacturers Specifications and Direction of Engg -In -Charge. 80mmm thick C.C Paver Blocks of M-30 grade with Approved Colour Design Pattern |
| 227 | Construction of 200x 150 dia production well with fitting and fixing of suitable Pump as per required head and discharge with electric cable provision |
| 228 | Construction of RCC Drain at Toe of Embankemnt |
| 229 | Earth work in ordinary soil excavation of foundation of structures as per drawing and technical specification, including setting out construction of shoring and bracing removal of stumps and other deleterious materials, dressing of sides and bottoms backfilling the excavation earth to the extent required and utilising the remaining earth locally for road work. |
| 230 | Supplying, all labour T&P for filling in foundation and plinth with sand watered and rammed with all cost, conveyance and royalities etc all complete as per direction of Engineer-in-charge of the departmet. |
| 231 | Supplying, all labour T&P materials providing cement conctere(1:4:8) with 40mm CB H.G.metals including cost, conveyance and royalty of materials etc all complete as per direction of Engineer-in-charge of the departmet. |
| 232 | Supplying, all labour T&P materials providing M 20 for RCC work using 25mm and down graded size HG chips including hosting & laying cost, conveyance and royalty of materials etc all complete as per direction of Engineer-in-charge of the departmet. |
| 233 | Supplying, all labour T&P materials for 6mm thick cement plaster (1:4) to RCC surfaces finished smooth including closed deep chiping and slury treatment etc all complete as per direction of Engineer-in-charge of the departmet. |
| 234 | Supplying, all labour T&P materials forcutting, bending binding & straightening & tying the grill and placing in position including cost of HYSD reinforcement bar and binding wire 18 to 20 gauge etc all complete as per direction of Engineer-in-charge of the departmet. |
| 235 | Supplying, all labour T&P rigid & smooth centering & shuttering for RCC works including false work & dismentaling then after casting including cost of materials complete in ground floor as per direction of Engineer-in-charge of the departmet. |
| 236 | Construction of RCC outfall Drain |
| 237 | Earth work in oridinary soil within 50m, initial lead and 1.5m, initial lift including rought dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-charge |
| 238 | Supplying, all labour T&P for filling in foundation and plinth with sand watered and rammed with all cost, conveyance and royalities etc all complete as per direction of Engineer-in-charge of the departmet. |
| 239 | Supplying, all labour T&P materials providing cement conctere(1:4:8) with 40mm CB H.G.metals including cost, conveyance and royalty of materials etc all complete as per direction of Engineer-in-charge of the departmet. |
| 240 | Supplying, all labour T&P materials providing M25 for RCC work using 20mm and down graded size HG chips including hosting & laying cost, conveyance and royalty of materials etc all complete as per direction of Engineer-in-charge of the departmet. |
| 241 | Supplying, all labour T&P materials for 6mm thick cement plaster (1:4) to RCC surfaces finished smooth including closed deep chiping and slury treatment etc all complete as per direction of Engineer-in-charge of the departmet. |
| 242 | Supplying, all labour T&P materials forcutting, bending binding & straightening & tying the grill and placing in position including cost of HYSD reinforcement bar and binding wire 18 to 20 gauge etc all complete as per direction of Engineer-in-charge of the departmet. |
| 243 | Supplying, all labour T&P rigid & smooth centering & shuttering for RCC works including false work & dismentaling then after casting including cost of materials complete in ground floor as per direction of Engineer-in-charge of the departmet. |
| 244 | supply and fixing of V- Notch instrument |
| 245 | Survey investigations report,all hydrolic designs, the correct level of the original ground and finish ground with a detailed drawing, structural designs, and drawings of wetwells, pump houses, pmcc rooms, etc. . the structural drawing of the weir structure, the soil test report, all quality test report, all pond detailed hydrolic with drawing, inlet outlet structure hydrolic and drawing, as well as a comprehensive drawing and design of the treatment facility in all respect as per engineer in charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
