Installation Testing And Commissioning Of Motor Pump-Set At Ashoka Park Rampura Ward Sewage Trolley In Ac 16, Delhi-Delhi

Installation Testing And Commissioning Of Motor Pump-Set At Ashoka Park Rampura Ward Sewage Trolley In Ac 16- 1 Making of cement concrete foundation suitable for the P/set with all material like cement, concrete, sand, etc. i/c supply and grouting of foundation bolts etc. as required. 2 Fabrication of MS base frame suitable of pump & motor (Pump & motor shall be provided by the department.) 3 S/O of 125 mm Dia M.S. pipe Make: Jindal /Tata / Approved make by DJB 4 S/O of 100 mm Dia M.S. pipe Make: Jindal /Tata / Approved make by DJB 5 S/O of 150 mm Dia M.S. pipe Make: Jindal /Tata / Approved make by DJB 6 Supply of sluice valve, non-rising with SS spindle flanged ends of size 125mm PN 1.0 MAKE: Kirloskar/ IVC /DJB Approved 7 Supply of sluice valve, non-rising with SS spindle flanged ends of size 100mm PN 1.0 MAKE: Kirloskar/ IVC /DJB Approved 8 Supply of C.I. NRV without bye pass swing type flanged ends of size 100 mm PN 1.0 MAKE: Kirloskar/ IVC / DJB Approved 9 Supply of C.I. NRV without bye pass swing type flanged ends of size 125 mm PN 1.0 MAKE: Kirloskar/ IVC / DJB Approved 10 S/o Nut bolts with washers of good quality. 11 Supply of 50% neoprene rubber packing of suitable size as per site requirement.Make: Jyoti/ Worth 12 Supply of rubber checkered sheet of size. 1x2x10 MM thick. MAKE: Jyoti/ DJB approved 13 Supply, 1.1 kV grade, XLPE insulated, stranded Aluminum Conductor, galvanized steel flat strip / round wire armored, extruded PVC type ST2 sheathed, conforming to IS:7098 (Part-1) & IEC:60502 SOR 18.5.1 Size 3.5 X 25 Sq mm 14 Installation of motor P/set, (pump & motor to be provided by the department) fixing of coupling and coupling guard, and other E&M equipment along with all piping work & making, providing and fixing of specials like Bends, Tee, reducer, flanges etc. as required at site & fixing of valve, and executing all allied E&M and civil work, laying of cable as per site requirement, making connection with thimble panel board by taking all safety precautions, arranging all tools and tackles i/c welding set gas cutter etc. as per site requirement. 15 Testing & commissioning of motor P/set& electrical panel i/c above all E&M equipment first at on No-load and then on full-load condition. 16 Transportation charges for man & Material including loading/ Unloading etc. as per site requirement at a suitable place as per direction of engineer-in-charge.

INR 500 /-

INR 8600.0 /-

Refer document