Bids Are Invited For 3 Phase, 415V Ac, 50Hz, Ie-2 Class, 2-Pole Squirrel Cage Induction Motor Complete With All Accessories Like Terminal Box, Terminal Block, Shorting Link, Gland Plate, Shaft Key, Cooling Fan, Earthing Clamps Etc., Rated Kw - 120 Shaft, Koraput-Odisha

Bids Are Invited For 3 Phase, 415V Ac, 50Hz, Ie-2 Class, 2-Pole Squirrel Cage Induction Motor Complete With All Accessories Like Terminal Box, Terminal Block, Shorting Link, Gland Plate, Shaft Key, Cooling Fan, Earthing Clamps Etc., Rated Kw - 120 Shaft Dia - 70 Mm Energy Efficiency Class: Ie2 Volts - 415 + / - 10% Freq - 50Hz + / - 5% Frame Size - Nd315l Of Cg Make Or Equivalent Rpm - 2975 ( 2-Pole ) Conn - Delta Current - 195 Amp Mounting - B3 Starting - Dol Protection - Ip55 Insul Class - F Duty - S1. Enclosure - Tefc Direction Of Rotation: Bidirectional. Application: Seal Air Fan Operation In Boilers Of Thermal Power Plant. Lubrication: Grease & Greasing Provision For Both De & Nde Side Bearings Easily Approachable From Outside. Ambient Conditions: Temperature: Maximum Of 50 Deg C, Altitude: Maximum 1000 Meters From Msl, Humidity: Maxm 90% Position Of Terminal Box ( Tb ) : Motor Terminal Box Should Be On The Left Side Seeing From Nde Side With Tb Rotatable At The Steps Of 90 Deg On The Same Position For Cable Entry From Sidewards ( Nde Left Side ) . Cable Entry Point: From Lhs Side Entry Viewed From Motor Nde With Double Gland Hole And Cover. A ) Motor Body And All Parts Of The Motor Exposed To Atmosphere Shall Be Of Material Other Than Cast Aluminium. The Material Shall Be Either Cast Iron Or Any Other Material, Which Does Not Get Corroded. B ) Motor Shall Be Provided With Chloro-Rubber Paint Or Equivalent Suitable For The Site Conditions. C ) Necessary Provision ( Either Insulated Bearing Or Insulated End-Shield ) Must Be There To Restrict Flow Of Eddy Currents. D ) Motor Shall Be Manufactured In The Year 2023 And Year Of Manufacturing Shall Be Embossed On Name Plate And As A Whole Should Be In Good, Healthy Condition. Any Defect / Damage Observed After Delivery Will Lead To Complete Rejection And No Repair At Our Site Shall Be Allowed. E ) Following Shall Also Be Provided On The Name Plate: I ) Description & Code No. Of Motor. Ii ) De And Nde Bearing Type And Number. Iii ) Weight Of The Motor Iv ) Type Of Lubrication And Recommended Interval Of Lubrication. Applicable Is Standards: A ) Ie-2 Energy Efficient Confirming To Is:12615-2018 B ) Is:325-2011 & Is:4029 Following Documents To Be Submitted By Vendor: A ) Type Test Certificate Of Similar Motor & Routine Test Certificate / Vibration Test Report Of Particular Motor Which Is To Be Supplied Shall Be Attached At The Time Of Delivery. B ) Documentary Evidence Of Compliance To The Requirement Of Ie-2 Class Of Is:12615:2011 To Be Submitted Along With The Offer. C ) Vendor Is Required To Submit Complete Data Sheet ( Ds ) & Dimensional Drawing ( Gad ) Of Offered Motor During Bidding For Technical Scrutiny And Recommendation Before Manufacturing. Inspection Clearance From Our Central Stores Shall Be Done Only After Taking Nl Test Trial Run At Our Workshop. ( Q3 ) Total Quantity : 1

Refer document

Refer document

Refer document